基本介紹
人物簡介,人物經歷,研究方向,主要貢獻,參與項目,發表論文,專利成果,獲獎記錄,
人物簡介
人物經歷
碩士畢業於海南大學材料物理與化學專業，師從李建保教授和鄧湘雲教授。碩士期間獲海南省優秀碩士畢業論文，作為學生參與863子課題一項，國家自然科學基金兩項。碩士畢業後，以優異成績獲得國家公派留學獎學金到義大利帕多瓦大學攻讀博士學位，導師Paolo.Colombo 教授（世界陶瓷學會院士、歐洲科學院院士）。
受邀為《Journal of Materials Science》，《Journal of hazardous materials》，《Materials & design》,《Journal of the European Ceramic Society》,《Construction & Building Materials》, 《Journal of Cleaner Production》，《Journal of Alloys and Compounds》等陶瓷材料、資源與環境、土木工程材料等領域40餘本SCI期刊審稿人。
研究方向
3. 3D列印成型技術；
5. 新型建築材料
主要貢獻
參與項目
- 國家十二五863計畫，2012AA03A610，複合碳化矽精細過濾膜材料規模化製備技術研究（高溫氣體淨化膜材料及其規模化製備技術子課題），649萬元，已結題，2012/1-2015/1 參加
- 國家自然科學基金地區科學基金項目，51262006，透明石墨烯量子點/石英玻璃塊體複合材料的製備和性能，2013/01-2016/12，50萬元，已結題，參加
- 國家自然科學基金地區科學基金項目，51362008，利用海南石英砂資源製備氮化矽陶瓷及氮化硼納米管增韌，已結題，51萬元，2014/01-2017/12，參加
發表論文
1 Bai C, Colombo P. Processing, properties and applications of highly porous geopolymers: A review[J]. Ceramics International, 2018. 2018,44(14), 16103-16118, (SCI)
2 Bai C, Ni T, Wang Q, et al. Porosity, mechanical and insulating properties of geopolymer foams using vegetable oil as the stabilizing agent[J]. Journal of the European Ceramic Society, 2018. 28,799-805. (SCI)
3 Bai C, Zheng J, Rizzi G A, et al. Low-temperature fabrication of SiC/geopolymer cellular composites[J]. Composites Part B: Engineering, 2018,137,23-30. (SCI)
4 Bai C, Franchin, G., Elsayed, H., Conte, A., & Colombo, P. (2016). High strength metakaolin-based geopolymer foams with variable macroporous structure. Journal of the European Ceramic Society, 36(16), 4243-4249.(SCI)
5 Bai, C., & Colombo, P. (2017). High-porosity geopolymer membrane supports by peroxide route with the addition of egg white as surfactant. Ceramics International, 43(2), 2267-2273. (SCI)
6 Bai, C., Conte, A., & Colombo, P. (2017). Open-cell phosphate-based geopolymer foams by frothing. Materials Letters, 188, 379-382. (SCI)
7 Bai C, Franchin G, Elsayed H, et al. High-porosity geopolymer foams with tailored porosity for thermal insulation and wastewater treatment[J]. Journal of Materials Research, 2017: 1-9. (SCI)
8 Bai, C. Y., Li, Y., Liu, Z. M., Liu, P. W., Deng, X. Y., Li, J. B., & Yang, J. (2015). Fabrication and properties of mullite-bonded porous SiC membrane supports using bauxite as aluminum source. Ceramics International, 41(3), 4391-4400. (SCI)
9 BAI Cheng-ying, DENG Xiang-yun, LI Jian-bao, JING Ya-ni, JIANG Wen-kai, LIU Zhang-min, LI Yu. Fabricationand properties of cordierite-mullite bonded porous SiC ceramics. Ceramics International.2014,4(40) 6225-6231(SCI)
10 BAI CHENG-ying, LI Jian-bao, JING Ya-ni, JIANG Wen-kai. Preparation and properties of mullite-bonded porous SiC ceramics using porous alumina as oxide. Materials Characterization. 2014, 90: 81-87 (SCI)
11 Li, Y., Bai, C. Y., Deng, X. Y., Li, J. B., Jing, Y. N., & Liu, Z. M. (2014). Effect of V 2 O 5 addition on the properties of reaction-bonded porous SiC ceramics. Ceramics International, 40(10), 16581-16587. (SCI)
12 Yani Jing, Xiangyun Deng, Jianbao Li, Chengying Bai, Wenkai Jiang, Fabrication and properties of SiC/mullite composite porous ceramics, Ceramics International. 2014,40(1) 1329-1334(SCI)
13 Jiang, W., Luo, S., Liu, P., Deng, X., Jing, Y., Bai, C., & Li, J. (2014). Purification of biosilica from living diatoms by a two-step acid cleaning and baking method. Journal of Applied Phycology, 26(3), 1511-1518. (SCI)
14 Zhang X, Li H, Liu L, Bai C,et al. Thermodynamic and economic analysis of biomass partial gasification process[J]. Applied Thermal Engineering,129, 2018,410-420.(SCI)
15 Zhang X, Li H, Liu L, Bai C,et al. Exergetic and exergoeconomic assessment of a novel CHP system integrating biomass partial gasification with ground source heat pump[J]. Energy Conversion and Management,156, 2018,666-679.(SCI)
16 Zhang, X., Li, H., Liu, L., Bai, C., Wang, S., Song, Q.,. & Zhang, G. (2018). Optimization analysis of a novel combined heating and power system based on biomass partial gasification and ground source heat pump. Energy Conversion and Management, 163, 355-370.(SCI)
17 Chengying Bai, Zhangmin Liu, Yani Jing, Xiangyun Deng, Jianbao Li, Yu Li, Wenkai Jiang, Xinxing Liao. Effect of Al(OH)3 Addition on the Properties of SiC/Al2O3 Composite Porous Ceramics. Advanced Materials Research, 821(2013), 1208-1212. (EI)
18 Yani Jing, Chengying Bai, Wenkai Jiang, Xinxing Liao, Xiangyun Deng, Jianbao Li, Fabrication and properties of porous SiC-cordierite ceramics, Advanced Materials Research, 803 (2013): 230-234 (EI)
19 Kuifan Su, Liming Wang ,Xiangyun Deng, Jianbao Li, Chunpeng Wang,.Guoqing Zhang, Yani Jing and Chengying Bai. Preparation SiC Ceramic composite Filtration Membrane materials by Dry Pressing and Synchronous sintering method. Advanced Materials Research, 2013,690-693:409-414 (EI)
20 白成英, 蘇魁范, 鄧湘雲, 等. 氧化結合法製備多孔碳化矽陶瓷及其特性[J]. 矽酸鹽通報, 2013, 32(9): 1699-1703.
21 景亞妮, 鄧湘雲, 李建保, 白成英, 蔣文凱, 李譽, & 劉張敏. (2013). SiC/莫來石復相多孔陶瓷氣孔率和強度的影響因素. 矽酸鹽通報, 32(10), 1979-1983.
22 劉鵬瑋, 蔡強, 白成英, 鄧湘雲, 李建保, 劉張敏, ... & 朱飄. (2015). 不同鋁源製備莫來石結合碳化矽多孔陶瓷及性能研究. 材料導報, (2015 年 20), 60-63.
23 劉張敏, 鄧湘雲, 白成英, 李譽, 劉鵬瑋, & 王豐喜. (2015). 多孔碳化矽複合陶瓷的製備與性能研究. 中國陶瓷, 51(10), 11-17.
24 王春鵬, 蘇魁范, 鄧湘雲, 李建保, 王黎明, 張國慶, ... & 白成英. (2013). 碳化矽多孔陶瓷支撐體的製備及性能研究. 中國陶瓷, (5), 13-16.
專利成果
鄧湘雲, 白成英,李建保,等 高溫過濾用碳化矽陶瓷膜的塗覆方法（已授權,專利號 ZL 2013 1 0130293.0 證書號 第 1439363號）
獲獎記錄
海南省優秀碩士論文
榮譽
白成英（1/1）,Publons同行評議獎：全球頂級審稿專家（Top Peer Reviewer 2019）, 工程領域全球前1%(Engineering，Publons, Web of Science Group)， 2019（白成英）；
白成英（1/1）,Publons 同行評議獎：全球頂級審稿專家（Top Peer Reviewer 2019）, 交叉學科領域全球前1%(Cross-field，Publons, Web of Science Group)， 2019（白成英）；
