CMOS電路設計布局與仿真

內容簡介

本書藉助PC版的電路設計軟體LASI，全面闡述了CMOS積體電路設計的相關知識，內容覆蓋積體電路設計、仿真和物理實現的全過程。書中以現代觀點對大量模擬和數字電路模組、BSIM模型、數據轉換器的體系結構等內容進行了深入討論。本書可以與學術界和工業界常用的標準EDA軟體(如Cadetlce、L-Edit、Magic、Mentor等)配套使用，可以作為積體電路設計師、版圖設計師、積體電路項目管理人員以及相關專業的教授和科研工作者的高層次教科書或參考 Russel Jacob (Jake) Baker (S’83-M’88-SM’97) was born in Ogden, Utah, on October 5, 1964. He received the B.S. and M.S. degrees in electrical engineering from the University of Nevada, Las Vegas, in 1986 and 1988. He received the Ph.D. degree in electrical engineering from the University of Nevada, Reno in 1993. From 1981 to 1987, he served in the United States Marine Corps Rese...(展開全部) Russel Jacob (Jake) Baker (S’83-M’88-SM’97) was born in Ogden, Utah, on October 5, 1964. He received the B.S. and M.S. degrees in electrical engineering from the University of Nevada, Las Vegas, in 1986 and 1988. He received the Ph.D. degree in electrical engineering from the University of Nevada, Reno in 1993. From 1981 to 1987, he served in the United States Marine Corps Reserves. From 1985 to 1993, he worked for E. G. & G. Energy Measurements and the Lawrence Livermore National Laboratory designing nuclear diagnostic instrumentation for underground nuclear weapons tests at the Nevada test site. During this time he designed over 30 electronic and electro-optic instruments including high-speed (750 Mb/s) fiber-optic receiver/transmitters, PLLs, frame- and bit-syncs, data converters, streak-camera sweep circuits, Pockell’s cell drivers, micro-channel plate gating circuits, and analog oscilloscope electronics. From 1993 to 2000, he served on the faculty in the department of electrical engineering at the University of Idaho on the Boise State campus. In 2000, he joined a new electrical and computer engineering program at Boise State University, where he served as department chair from 2004 to 2007. At Boise State he helped establish graduate programs in electrical and computer engineering including, in 2006, the university’s second PhD d

CMOS電路設計布局與仿真

基本介紹

相關詞條

熱門詞條