祝雪峰(大連理工大學汽車工程學院教授)

祝雪峰，男，畢業於大連理工大學，博士，大連理工大學汽車工程學院教授、博士生導師，碩士生導師，國家重點研發計畫首席科學家。

基本介紹

• 中文名：祝雪峰
• 國籍：中國
• 畢業院校：大連理工大學
• 學位/學歷：博士
• 職業：教師
• 專業方向：車輛工程
• 主要成就：國家重點研發計畫首席科學家
• 任職院校：大連理工大學

人物經歷

教育經歷

2007.9-2012.12 大連理工大學車輛工程博士

2008.10-2010.10 美國密西根大學公派聯合培養博士

2005.9-2007.7 大連理工大學計算數學

2000.9-2004.7 吉林大學信息與計算科學學士

工作經歷

2023.12- 大連理工大學汽車工程學院教授

2018.12- 大連理工大學汽車工程學院副教授

2015.4-2018.12 大連理工大學汽車工程學院講師

2013.2-2015.3 大連理工大學工程力學系師資博士後

社會兼職

2019.1-2022.12專家委員會委員(中國數位化仿真聯盟專家委員會委員)

2018.10-2018.12委員(IEEE智慧型交通協會人機工程技術交流委員會委員)

2017.1-2022.1委員(中國人工智慧學會智慧型駕駛委員會)

研究方向

等幾何分析和拓撲最佳化

複雜工業裝備工業CAE軟體

人工智慧實時仿真技術

電池第一性原理仿真和AI設計

學術成果

代表性論文

[1] Zhu X F, Fu W QXu X J Intent Prediction of Pedestrians via Integration of Facial Expression and Human 2D Skeleton for Autonomous Car-like Mobile Robots [J], Proceedings of the 2021 Ieee 16th Conference on Industrial Electronics and Applications (Iciea 2021), 2021, 1775-1780. DOI:10.1109/Iciea51954.2021.9516159.

[2] Zhou Y,Xing T,Song Y, et al. Digital-twin-driven geometric optimization of centrifugal impeller with free-form blades for five-axis flank milling [J], Journal of Manufacturing Systems, 2021, 58: 22-35. DOI:10.1016/j.jmsy.2020.06.019.

[3] Zhao Y N,Liu X C,Lu H, et al. An optimized deep convolutional neural network for yield prediction of Buchwald-Hartwig amination [J], Chemical Physics, 2021, 550. DOI:ARTN 111296

10.1016/j.chemphys.2021.111296.

[4] Hou W B,Jiang K,Zhu X F, et al. Extended isogeometric analysis using B plus plus splines for strong discontinuous problems [J], Computer Methods in Applied Mechanics and Engineering, 2021, 381. DOI:ARTN 113779

10.1016/j.cma.2021.113779.

[5] Zhu X F,Ji Y,Zhu C G, et al. Isogeometric analysis for trimmed CAD surfaces using multi-sided toric surface patches [J], Computer Aided Geometric Design, 2020, 79. DOI:ARTN 101847

10.1016/j.cagd.2020.101847.

[6] Wang C S, Zhu X FZhang X K Quasi-conforming analysis method for trimmed CAD surfaces [J], European Journal of Mechanics a-Solids, 2020, 81. DOI:ARTN 103959

10.1016/j.euromechsol.2020.103959.

[7] Hou W B,Jiang K,Zhu X F, et al. Extended Isogeometric Analysis with strong imposing essential boundary conditions for weak discontinuous problems using B plus plus splines [J], Computer Methods in Applied Mechanics and Engineering, 2020, 370. DOI:ARTN 113135

10.1016/j.cma.2020.113135.

[8] Gai Y D,Zhu X F,Zhang Y J, et al. Explicit isogeometric topology optimization based on moving morphable voids with closed B-spline boundary curves [J], Structural and Multidisciplinary Optimization, 2020, 61: 963-982. DOI:10.1007/s00158-019-02398-1.

[9] Zhu X F,Zhao C,Wang X, et al. Temperature-constrained topology optimization of thermo-mechanical coupled problems [J], Engineering Optimization, 2019, 51: 1687-1709. DOI:10.1080/0305215x.2018.1554065.

[10] Zhu X F,Xu L K,Liu X C, et al. Theoretical prediction of mechanical properties of 3D printed Kagome honeycombs and its experimental evaluation [J], Proceedings of the Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science, 2019, 233: 6559-6576. DOI:Artn 0954406219860538

10.1177/0954406219860538.

[11] Zhao Y N,Luo G,Kang X H, et al. "C-H center dot center dot center dot pi Interaction" regulates the stereoselectivity in olefin polymerization [J], Chemical Communications, 2019, 55: 6689-6692. DOI:10.1039/c9cc02165e.

[12] Ji F Z,Bao Y P,Zhou Y, et al. Investigation on performance and implementation of Tesla turbine in engine waste heat recovery [J], Energy Conversion and Management, 2019, 179: 326-338. DOI:10.1016/j.enconman.2018.10.071.

[13] Zhang X K,Zhu X F,Wang C S, et al. Initial solution estimation for one-step inverse isogeometric analysis in sheet metal stamping [J], Computer Methods in Applied Mechanics and Engineering, 2018, 330: 629-645. DOI:10.1016/j.cma.2017.10.018.

[14] Zhu X F, Ma Z DHu P Nonconforming isogeometric analysis for trimmed CAD geometries using finite-element tearing and interconnecting algorithm [J], Proceedings of the Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science, 2017, 231: 1371-1389. DOI:10.1177/0954406216688491.

[15] Zhang X K,Jin C N,Hu P, et al. NURBS modeling and isogeometric shell analysis for complex tubular engineering structures [J], Computational & Applied Mathematics, 2017, 36: 1659-1679. DOI:10.1007/s40314-016-0312-1.

[16] Zhang W S,Chen J S,Zhu X F, et al. Explicit three dimensional topology optimization via Moving Morphable Void (MMV) approach [J], Computer Methods in Applied Mechanics and Engineering, 2017, 322: 590-614. DOI:10.1016/j.cma.2017.05.002.

[17] Hou W B,Gai Y D,Zhu X F, et al. Explicit isogeometric topology optimization using moving morphable components [J], Computer Methods in Applied Mechanics and Engineering, 2017, 326: 694-712. DOI:10.1016/j.cma.2017.08.021.

[18] Zhu X F, Hu PMa Z D B plus plus splines with applications to isogeometric analysis [J], Computer Methods in Applied Mechanics and Engineering, 2016, 311: 503-536. DOI:10.1016/j.cma.2016.08.029.

[19] Wang X, Zhu X FHu P Isogeometric finite element method for buckling analysis of generally laminated composite beams with different boundary conditions [J], International Journal of Mechanical Sciences, 2015, 104: 190-199. DOI:10.1016/j.ijmecsci.2015.10.008.

[20] Zhu X F,Hu P,Ma Z D, et al. A new surface parameterization method based on one-step inverse forming for isogeometric analysis-suited geometry [J], International Journal of Advanced Manufacturing Technology, 2013, 65: 1215-1227. DOI:10.1007/s00170-012-4251-8.

[21] Zhu X FHu P Mesh parameterization based on inverse finite element method: theory and application [J], Inverse Problems in Science and Engineering, 2013, 21: 1169-1182. DOI:10.1080/17415977.2012.743539

發明專利

一種金屬散熱動力電池包結構設計方法及電池包

一種基於參數映射的複雜曲面測量規劃方法

著作成果

胡平，祝雪峰，夏陽，精確幾何擬協調分析，科學出版社，2016

祝雪峰，胡平，張向奎，王長生，夏陽，面向CAD和CAE無縫融合的等幾何分析，機械工業出版社，2022

科研項目

[1] 嵌入域等幾何CAE理論和計算方法研究及軟體實現，國家重點研發計畫工業軟體重點專項，2021.12-2024.11，主持，在研

[2] 含時密度泛函第一性原理高精度多解析度擬協調等幾何分析研究, 國家自然科學基金面上項目，2019.01-2022.12，在研

[3] 複雜剪裁CAD曲面的非協調等幾何混合殼分析研究, 國家自然科學基金項目, 2013/09/25-2016/12/31, 主持，完成

[6] 基於等幾何分析的高精度浸入層次B++樣條有限元法, 國務院其他部門, 2013/09/01-2015/01/22, 主持，完成

[7] 三維裁剪曲面CAD/CAE/OPT“無縫”集成關鍵算法研究與軟體開發, 國家自然科學基金項目, 2018/08/16, 參與，進行

[10] X7R創新課題框架車身特性參數多目標最佳化項目, 2018/05/07-2019/01/31, 進行

[11]危險氣體探測巡檢機器人項目契約, 2018/04/18-2019/10/31, 進行

[12]顯式幾何描述下考慮非機率不確定性的連續體結構拓撲最佳化研究, 國家自然科學基金, 2017/08/17, 進行

[13]考慮載入歷史的熱衝壓成形破裂預測及消除方法研究, 國家自然科學基金, 2014/09/01-2017/12/31, 完成

[14]基於精確幾何擬協調技術的金屬板材大步長隱式成形及回彈算法研究, 國家自然科學基金, 2014/09/01, 完成

[15]車用動力鋰電池組結構設計, 2017/09/12-2018/12/31, 完成