王軼農，男，畢業於東北大學，博士，大連理工大學教授、博士生導師、碩士生導師。
基本介紹
- 中文名：王軼農
- 畢業院校：東北大學
- 學位/學歷：博士
- 專業方向：材料學
- 任職院校：大連理工大學
人物經歷,教育經歷,工作經歷,學術成果,論文成果,科研項目,
人物經歷
教育經歷
1996.9-2000.3 東北大學材料學博士
1987.9-1990.3 哈爾濱工業大學材料學碩士
1980.9-1984.7 東北重型機械學院材料學學士
工作經歷
2008.12至今 大連理工大學教授
2002.3-2007.11 大連理工大學副教授
2000.4-2002.3 大連理工大學博士後
1990.3-1996.7 佳木斯工學院講師、副教授
1984.7-1987.7 佳木斯工學院助教
學術成果
論文成果
1.Y.N. Wang, C.S. He, X. Zhao, L. Zuo, Z.D. Liang, Effect of Electric Field Annealing on The Recrystallization and Texture of Cold-Rolled Commercial Pure Copper,Acta Metallurgica Sinica,36(2000):126-130.
2.Y.N. Wang, B.L. Wu, G. Wang, Q.W. Jiang, X. Zhao, L. Zuo, Recrystallization Texture, CSL Grain Boundary Distribution and Corrosion Resisting Property of LY12 Alloy,Acta Metallurgica Sinica,36(2000):1085-1088.
3.L.X. Liu, J.H. Chen, D.Z. Yang, W.Q. Wang,Y.N. Wang, Characterization of TiO2/Ta2O5Films Synthesized by Ion Beam on NiTi Alloy for Biomedical Application,J. Mater. Sci. Technol. 17(2001): 35-39.
4.Y.N. Wang, J.C. Huang, Comparison of Grain Boundary Sliding in Fine Grained Mg And Al Alloys during Superplastic Deformation,Scripta Mater., 48 (2003): 1117-1123.
5.Y.N. Wang, J.C. Huang, Texture Analysis in Hexagonal Materials (review),Mater. Chem. Phys, 81 (2003): 11-22.
6.Y.N. Wang, C.L. Lee, C.C. Huang, H.K. Lin and J.C. Huang, Influence From Extrusion Parameters on High Strain Rate and Low Temperature Superplasticity of AZ Serious Mg-Based Alloys,Mater. Sci. Forum, 426-433 (2003): 2655-2659.
7.Y.N. Wang, J.C. Huang, Texture Characteristics and Anisotropic Superplasticity of AZ61 Magnesium Alloy,Mater. Trans. JIM, 44 (2003): 2276-2281.
8. K.L. Yang, J.C. Huang andY.N. Wang, Phase Transformation inbphase of Supera2-Ti3Al Base Alloys during Static Annealing and Superplastic Deformation at 700-1000°C,Acta Mater.,51 (2003): 2577-2594.
9. K.L. Yang, J.C. Huang andY.N. Wang, Phase Evolution and Mechanical Behavior of Supera2-Ti3Al Base Alloys during Superplastic Deformation at Lower Temperatures of 700-900°C,Key Eng. Mater.,233-236 (2003): 881-886.
10. C.S. He, Y.D. Zhang,Y.N. Wang, X. Zhao, L. Zuo, C. Esling, Texture and microstructure development in cold-rolled interstitial free (IF) steel sheet during electric field annealing,Scripta Mater., 48 (2003): 737-741.
11.Y.N. Wang, J.C. Huang, Transition of dominant diffusion process during superplastic deformation in AZ61 magnesium,Metall. Mater. Trans., 35A (2004): 555-561.
12. S.H. WU, J.C. Huang, andY.N. Wang, Evolution of microstructure and texture in Mg-Zn-Al alloys during electron-beam and gas tungsten arc welding,Metall. Mater. Trans., 35 (2004): 2455-2469.
13.Y.N. Wang, J.C. Huang, SEM investigation on superplastic deformation in Mg-AZ61 alloy sheet,Materials Review, 18 (2004): 230-233.
14. C.W. Gong,Y.N. Wang, D.Z. Yang, Microstructure and transformation behavior of Ni50Ti45Ta5 shape memory alloy,Trans. Nonferrous Met. Soc. China, 14(2004): 952-957.
15. K.L Yang, J.C. Huang andY.N. Wang, Texture evolution and mechanical Aaisotropy in dual phase Ti3Al based alloy loaded at 700°C and 1000°C,Metall. Mater. Trans., 35A (2004): 3803-3810.
16.Y.N. Wangand J.C. Huang, Superplasticity enhanced by two-stage deformation in a hot-extruded AZ61 alloy magnesium alloy,J. Mater. Sci. Tech., 21(2005): 71-74.
17.Y.N. Wangand J.C. Huang, Anisotropic tensile properties at room temperature and elevated temperature in arm-extruded AZ61 magnesium alloy,Mater. Sci. Forum, 495-497(2005): 657-662.
18. C.W. Gong,Y.N. Wang, D.Z. Yang, X.P. Liu, R-phase transformation of aged Ti-Ni shape memory alloy.Trans. Nonferrous Met. Soc. China, 15(2005): 1237-1241.
19. X.P. Liu,Y.N. Wang,M.Qi,D.Z.Yang, Effects of thermo-high magnetic field coupled aging on phase transformation behavior of Ni-rich Ti-Ni shape memory alloy,ChineseJournal of Nonferrous Metals,16(2006): 2005-2009.
20. Y.X. Cai, Y.D. Liu,Y.N. Wang, G.Wang, Y.D.Wang,F.Wang,L.Zuo,Analysis of texture formation and microstructure characteristics of cold rolled IF steel sheets,Mater. Sci. Forum, 495-497 (2005): 411-415.
21. B.L. Wu, A.H. Shi, Y.D. Zhang,Y.N. Wang, L.Zuo,C. Esling,The influence of texture and GBCD on stress corrosion and intergranular corrosion in 2024 aluminum alloy,Solid State Phenomena, 105(2005): 181-186.
22. N. Jia, Y.D. Wang, S.D. Wu, W.Z.Han,Y.N. Wang,J.N. Deng, P.K. Liaw, Anomalous hardening in copper due to the growth of deformation-induced micro-twins after annealing,Scripta Mater., 54 (2006): 1247-1252.
23. C.W. Gong, Y. Li,Y.N. Wang, D.Z. Yang, Ab initio study for electronic and crystal structure of NiTi R-phase,Modelling Simul. Mater. Sci. Eng,14(2006): 33-39.
24. C.W. Gong,Y.N. Wang, D.Z. Yang, Phase transformation and second phases in ternary Ni-Ti-Ta shape memory alloys,Mater .Chem. Phys., 96(2006): 183-187.
25. C.W. Gong,Y.N. Wang, D.Z. Yang, Martensitic transformation of Ni50Ti45Ta5shape memory alloy.Journal of Alloys and Compounds., 419(2006): 61-65.
26. C.W. Gong,Y.N. Wang, D.Z. Yang, Ab initio study of the martensitic transformation of NiTi shape memory alloys,Acta Physics Sinica, 55(2006): 2877-2881.
27.Y.N. Wang, C.I. Chang, C.J. Lee, H.K. Lin and J.C. Huang, Texture and week grain size dependence in friction stir processed Mg-Al-Zn alloy,Scripta Mater., 55(2006): 637-640.
28. C.I. Chang,Y.N. Wang, H.R. Pei, C.J. Lee, and J.C. Huang,On the hardening of friction stir processed Mg-AZ31 based composites with 5-20% nano-ZrO2and nano-SiO2Particles,Mater. Trans. JIM,47 (2006): 2942-2949.
29.Y.N. Wang, J.C. Huang, The role of twinning and untwinning in yielding behavior in hot-extruded Mg-Al-Zn alloy,Acta Mater., 55(2007): 897-905.
30. T.H Hung, Y.C. Chang,Y.N. Wang, C.W. Tang, J.N. Kuo, H.M. Chen, Y. L. Tsai, J.C. Huang, J.S. Jang, C.T. Liu, Development of Mg based amorphous alloys with higher amounts of rare earth elements,Mater. Trans. JIM, 48(2007): 1621-1625.
31. Z.W.Liu, C.W. Sun, Q.Y. Zhang,Y.N. Wang, B. Wu, Z.X. Jin, Morphology and interface characteristics of ZnO films deposited at room temperature and 750°C,Surface Coating and Technology, 201 (2007): 5422-5426.
32.Y.N. Wang, J.C. Huang, Grain size dependence of yield strength in randomly textured Mg-Al-Zn alloy,Mater. Trans. JIM, 48 (2007): 184-188.
33. I. Chang,Y.N. Wang, H.R. Pei, C.J. Lee, X.H. Du, J.C. Huang, Microstructure and mechanical properties of nano-ZrO2and nano-SiO2particulate reinforced AZ31-Mg based composites fabricated by friction stir processing,Key Engineering Materials, 351(2007): 114-119.
34. B.L. Wu, G.Y. Sha,Y.N. Wang, Y.D. Zhang, C. Esling, Grain refinement of an Al-Cu-Mg alloy by microalloying and common thermo-mechanical treatment,Materials Science Forum, 546-549(2007):917-922.
35. L.L. Chang,Y.N. Wang, X. Zhao, J.C. Huang, Microstructure and mechanical properties in an AZ31 magnesium alloy sheet fabricated by asymmetric hot extrusion,Materials Science and Engineering A, 496(2008): 512-516.
36. B. Zheng,Y.N. Wang, M. Qi, C.L. Chen, An examination of surface stress effects and deformation mechanisms in Al–Cu nanowires,Modelling Simul. Mater. Sci. Eng., 16(2008):1-7.
37. L.L. Chang,Y.N. Wang, X. Zhao, Modeling of severe deformation and mechanical properties in Mg-3Al-1Zn alloy through asymmetric hot-extrusion,Trans. Nonferrous Met. Soc. China, 18(2008): 257-262.
38.X.P. Liu, Y.N. Wang, D.Z. Yang, M. Qi, The effect of ageing treatment on shape setting and superelasticity of a nitinol stent,Mater. Character., 59(2008): 402-406.
39. L.L. Chang,Y.N. Wang, X. Zhao, M. Qi, Grain size and texture effect on compression behavior of hot-extruded Mg–3Al–1Zn alloys at room temperature,Mater. Character., 60(2009): 991-994.B. Zheng,
40.B. Zheng,Y.N. Wang, M. Qi, E.H. Williams, Phase boundary effects on the mechanical deformation of core/shell Cu/Ag nanoparticles,J. Mater. Res., 24 (2009): 2210-2214.
41. L.L. Chang, E.F. Shang,Y.N. Wang, X. Zhao, M. Qi, Texture and microstructure evolution in cold rolled AZ31magnesium alloy,Mater. Character., 60(2009): 487-491.
41.K.D. Wang, L.L. Chang,Y.N. Wang, J.C. Huang, Preparation of Mg-AZ31 based composites with Ti particles by friction stir processing,Chinese Journal of Nonferrous Metals, 19(2009):418-423.
42.B. Zheng, W. Zhou,Y.N. Wang, M. Qi, Martensite Transformation in NiTi Alloy Under Coupling Temperature and High Magnetic Field Using Landau Theory Model,Acta Metallurgica Sinica, 45(2009):37-42.
43.Y.N. Wang, S.B. Kang, J.Y. Cho,Microstructural evolution of twin-roll cast Mg-3Al-0.5Mn-0.2Mm alloy during warm rolling and subsequent annealing，Journal of Materials Processing Technology, 210 (2010): 1270-1275.
44.Y.N. Wang, S.B. Kang, J.Y. Cho, Microstructure and mechanical properties of Mg-Al-Mn-Ca alloy sheet produced by twin roll casting and sequential warm rolling,Journal of Alloys and Compounds, 509 (2011): 704-711.
45.R. Ma, L. Wang,Y.N. Wang, D.Z. Zhou, Microstructure and mechanical properties of the AZ31 magnesium alloy sheets processed by asymmetric reduction rolling,Materials Science and Engineering A,638(2015):190-196.
46.Y. Lu, R. Ma,Y.N. Wang, Texture evolution and recrystallization behaviors of Cu-Ag alloys subjected to cryogenic rolling,Trans. Nonferrous Met. Soc. China, 25(2015):2948-2957.
47.D.Z. Zhou, Y. Lu, R. Ma, Y.N. Wang, Strain hardening behavior during uniaxial compression of as-extruded AZ31 magnesium alloy,Chinese Journal of Nonferrous Metals, 25(2015):1128-1135.
48.B. Zheng,Y.N. Wang, M. Qi, H.L. Du, Extended dislocations in plastically deformed metallic nanoparticles,Nanomaterials and Nanotechnology, 6(2016)64100:1-6.
49.R. Ma, Y.Q. Zhao, Y.N. Wang, Grain refinement and mechanical properties improvement of AZ31 Mg alloy sheet obtained by two-stage rolling,Materials Science and Engineering A, 2017, 691: 81~87.
50.L.H. Song, B.L. Wu, L. Zhang, X. H. Du,Y.N.Wang,Y. D. Zhang, C. Esling, Cyclic deformation behaviors of AZ31B magnesium alloy in two different asymmetric loading manners,Materials Science and Engineering A, 689(2017):134-141.
51.X.G. You, Y.Tan, S. Shi,J.M. Yang,Y.N. Wang, J.Y. Li, Q.F. You, Effect of solution heat treatment on the precipitation behavior and strengthening mechanisms of electron beam smelted Inconel 718 superalloy,Materials Science and Engineering A, 689(2017):257-268.
52.Q.F. You, S. Shi, X.G. You,Y. Tan,Y.N. Wang, J.Y. Li, Evaporation behavior of Ni, Cr and Fe in Inconel 718 superalloy during electron beam smelting,Vacuum, 35(2017):135-141.
53.L. Wang, Y.Q. Zhao, H.M. Chen, J. Zhang, Y.D. Liu,Y.N. Wang, Improvement of Mechanical Properties of Magnesium Alloy ZK60 by Asymmetric Reduction Rolling,Acta Metall. Sin., 31(2018):63-70.
54.Y.Q. Zhao, H.M. Chen, J. Zhang, R. Ma, Y.D. Liu,Y.N. Wang, L. Wang, Q. Zhang, W.G. Li, Influences of Asymmetric Reduction Rolling on the Microstructure and Mechanical Properties of AZ91,Acta Metall. Sin., 2018, 31(2018):673-680.
55.R. Ma, Y. Lu, L. Wang,Y.N. Wang, Influence of rolling route on microstructure and mechanical properties of AZ31 magnesium alloy during asymmetric reduction rolling,Trans. Nonferrous Met. Soc. China, 28(2018):902-911.
56.X.G. You, Y. Tan, Q.F. You,Y.N. Wang, F. Ye, J.Y. Li, Effect of solution heat treatment on microstructure and electrochemical behavior of electron beam smelted Inconel 718 superalloy,Journal of Alloys and Compounds, 741(2018):792-803.
57.L.H. Song, B.L. Wu, L. Zhang, X.H. Du, Y.N. Wang, C. Esling,Twinning characterization of fiber-textured AZ31B magnesium alloy during tensile deformation,Materials Science and Engineering A710(2018):57-65.
58.L. Wang, Y.Q. Zhao, J. Zhang, R. Ma, Y.D. Liu, Y.N. Wang, Q. Zhang, W. Li, Y. Zhang, Quantitative analysis on friction stress of hot-extruded AZ31magnesium alloy at room temperature,Journal of
Materials Science & Technology, 2018, in press.https://doi.org/10.1016/j.jmst.2018.02.011.
科研項目
1. 國家自然科學基金面上項目：“塗層導體用Ni-9W合金自生複合基帶微觀組織與立方織構演變機制”，51471041, 2015.01-2018.12，項目負者人。
2. 國家自然科學基金面上項目：“非對稱熱擠壓變形鎂合金織構與塑形調控及織構形成機制研究”，51271046, 2013.01-2016.12，項目負者人。
3. 國家科技支撐項目：“雷射-氬弧複合焊接技術”，2009ZX04007-032，2010.01-2014.12，主要參加人。
4. 遼寧省重點實驗室計畫項目：“基於非對稱熱變形製備高塑形鎂合金板材及其相關性能研究”，2008S052，2008.01-2010.12, 項目負責人。
5. 國家自然科學基金重點項目：“應力、溫度和磁場耦合作用下馬氏體相變理論及在新材料設計中的套用”，50531020，2006.01-2009.12。參加單位大連理工大學負責人。
6. 遼寧省自然科學基金：“異步軋制鎂合金織構特徵與力學性能研究”，20042159，2005.01-2007.12, 項目負責人。
7. 國家自然科學基金面上項目：“變形鎂合金基面織構傾轉機制與織構增韌研究”，51041069, 2004.01-2006.12, 項目負者人。
8. 國家自然科學基金面上項目：“Ni-Ti-Ta合金的相變、形狀記憶效應及相關醫學性能研究”，50171015，2003-01至2005-12，項目主要參加人。
9. 國家“十五”高技術“863”項目：“鎂合金先進焊接技術”，2002AA331160, 2003.01-2005.12，主要參加人。
