武玉英，女，1982年5月生，山東大學，材料科學與工程學院，博士畢業，現任山東大學，材料科學與工程學院，教授。
基本介紹
人物經歷,研究方向,主要成就,論文,專利,科技獎勵,主持項目,社會任職,
人物經歷
1999/09-2003/06，山東大學，材料科學與工程學院，本科
2003/09-2008/06，山東大學，材料科學與工程學院，博士
2008/07-2010/12，山東大學，材料科學與工程學院，講師
2011/01-2019/08，山東大學，材料科學與工程學院，副教授
2019/09至今，山東大學，材料科學與工程學院，教授
研究方向
1. 鋁合金的強韌化研究
2. 特種晶種合金的製備
3. 金屬的液固相關性
主要成就
論文
1. W.T. Yuan, Y.Y. Wu*, C.C. Wu, S. Zhao, X.F. Liu, Evolution of amorphous boron transformed into crystal nanospheres under eletctron beam irradiation, Results in Physics, 2020,16:102841
2. S. Zhao, Y.Y. Wu*, B, Zhou, X.F. Liu, Synthesis of boron nanosheets in copper medium, Scientific Report, 2019, 9: 17337
3. X.L. Cui, H.W. Cui, Y.Y. Wu*, X.F. Liu,The improvement of electrical conductivity of hypoeutectic Al-Si alloys achieved by composite melt treatment, Journal of Alloys and Compounds, 2019, 788, 1322-1328
4. X.L. Cui, Y.Y. Wu*, X.F. liu, Effect of Mn on growth mechanism and morphology evolution of CrB2 in Al melt, Materials Letters, 2019, 238:229-232
5. F.C. Meng, Y.Y. Wu*, K.Q. Hu, Y. Li, Q.Q. Sun, X.F. Liu, Evolution and Strengthening Effects of the Heat-Resistant Phases in Al-Si Piston Alloys with Different Fe/Ni Ratios, Materials, 2019, DOI:10.3390/ma12162506
6. Yuying Wu, Zuxin Sun, Shuo Zhao, Xiaoxiao Han and Xiangfa Liu, Growth mechanisms of fiber-like and dendrite-like boron in a Cu melt, CrystEngComm, 2018, 20, 1970
7. Wu Yuying, Liu Xiangfa, Effect of AlB2 on the P-threshold in Al-Si alloy, Results in Physics, 2018, 9: 734-739
8. Zhao Shuo, Wu Yuying*, Sun Zuxin, Zhou Bo, Liu Xiangfa, Superhard Copper Matrix Composite Reinforced by Ultrafine Boron for Wear-Resistant Bearings, ACS Applied Nano Materials, 2018, 1(10): 5382–5388
9. X.L. Cui, Y.Y. Wu*, H.W. Cui, G.J. Zhang, B. Zhou, X.F. Liu*, The improvement of boron treatment efficiency and electrical conductivity of AA1070Al achieved by trace Ti assistant, Journal of Alloys and Compounds, 2018, 735:62-67
10. X.F. Du, T. Gao, Z. Qian, Y.Y. Wu, X.F. Liu, The in-situ synthesis and strengthening mechanism of the multi-scale SiC particles in Al-Si-C alloys, Journal of Alloys and Compounds, 2018, 750, 935-944
11. H.B. Yang, T. Gao, Y.Y. Wu, H.N. Zhang, X.F. Liu, Microstructure and mechanical properties at both room and high temperature of in-situ TiC reinforced Al–4.5Cu matrix nanocomposite, Journal of Alloys and Compounds, 2018, 767, 606-616
12. K.Q. Hu, X. Ma, T. Gao, Q.F. Xu, Y.Y. Wu, X.F. Liu, Morphological transformation mechanism of eutectic Si phases in Al–Si alloys by nano-AlNp, Journal of Alloys and Compounds, 2018, 765, 113-120
13. Y.Y. Wu, Y. Li, H.W. Chen et al., Growth of single crystalline boron nanotubes in a Cu alloy, CrystEngComm, 2017, 31:4510-4518
14. Y.Y. Wu*, Z.X. Sun, H.W. Chen* et al. A simple method to prepare boron spheres in Cu alloy, Mater. Lett., 2017, 205:24-27
15. Z.X. Sun, Y.Y. Wu*, X.F. Liu et al. Growth mechanisms of alpha-boron and beta-boron in a copper melt at ambient pressure and its stabilities, CrystEngComm, 2017, 19:3947-3954
16. Z.X. Sun, Y.Y. Wu*, Y.F. Li, Hui Li, H.W. Chen, X.F. Liu, The evolution mechanism of boron nanoparticles from sphere into in copper melts, Mater. Lett., 2017, 189:240-243
17. X. Cui, Y. Wu*, G. Zhang, Y. Liu, X. Liu, Study on the Improvement of Electrical Conductivity and Mechanical Properties of Low Alloying Electrical Aluminum Alloys, Composite part B: Engineering, 2017, 110:381-387
18. X.L. Zhou, Y.Y. Wu*, Y.F. Li, L.Wu, T. Gao, X.F. Liu, Absorbing formation mechanism of AlP on TiB2 substrate and their application as high efficiency nucleating agent in Al-45Si alloy, J. Alloy Compd. 2017, 693: 853-858
19. G.J. Zhang, Y.Y. Wu*, H.B. Yang, G.L. Liu, Q.Q. Sun, X.F. Liu, Influence of Anti Zr-poisoning Al-Ti-B-C Master Alloy on Mechanical Properties of 7050 Aluminum Alloy, Journal of Materials Engineering, 2017, 45:1-8
20. Z.X. Sun, Y.Y. Wu*, X.L.Cui, G.J. Zhang, Fabrication and properties of in situ B13P2 reinforced Cu-based composites, Materials Science Forum, 2017, 898:1007-1014
21. 武玉英，孫謙謙，劉桂亮，劉相法，Al-P系晶種合金的研究與套用，精密成形工程，2017，9(5): 57-62
22. X.L. Zhou, Y.Y. Wu*, Y.F. Li, L.Wu, T. Gao, X.F. Liu, Evolution of a novel Si-18Mn-16Ti-11P alloy in Al-Si melt and its influence on microstructure and properties of high-Si Al-Si alloy, Results in Physics, 2016, 6: 737-745.
23. X.L.Cui，Y.Y.Wu*，X.F. Liu, Effects of grain refinement and boron treatment on electrical conductivity and mechanical properties of 1070 alloy, Materials & Design, 2015, 86:397-403
24. X.L. Cui, Y.Y. Wu*, X.F. Liu, Microstructural characterization and mechanical properties of VB2/A390 composite alloy. Journal of Materials Science & Technology, 2015, 31:1027-1033
25. X.L. Cui, Y.Y. Wu*, T Gao, X.F. Liu，Preparation of a novel Al–3B–5Sr master alloy and its modification, Journal of Alloys and Compounds, 2014, 615:906-911
26. X.L. Cui, Y.Y.Wu*, T.Gao, X.F.Liu, Influence of preparation temperature on morphology evolution and growth mechanism of CrB2 in Al–Cr–B alloys, Materials Letters, 2014, 118:176–179
27. Xiangzhen Zhu, Yuying Wu, Chong Li, Pengting Li, Huan Qiao, and Xiangfa Liu. The Dispersive Orientated-Precipitation of AlP on Alumina Film and Its Effect on the Primary Si Gathering Behavior in the Al-Si Alloy Surface Layer. CrystEngComm, 2014, 16(25): 5583-5590
28. Du, Xiaofan; Gao, Tong; Wu Yuying; Liu, Xiangfa, Effects of copper addition on the in-situ synthesis of SiC particles in Al-Si-C-Cu system Source: Materials and Design, 2014, 63:194-199
29. Gao, Tong; Wu, Yuying; Li, Chong; Liu, Xiangfa, Morphologies and growth mechanisms of α-Al(FeMn)Si in Al-Si-Fe-Mn alloy Source: Materials Letters, 2013, 110:191-194
30. Xiaoli Cui, Yuying Wu*, Tong Gao, Chong Li, Jinfeng Nie, Xiangfa Liu, In situ CrB2 and its effect on the mechanical properties of A390 alloy, Materials Characterization, 2013, 86:296–302
專利
1. 武玉英，劉相法，丁同明，一種鋁-矽合金用除鈣劑及其製備方法，專利號：ZL201010593187.2
2. 武玉英，崔曉麗，劉相法，一種六硼化鈣增強鋁基複合材料的製備方法，專利號：ZL201310165038X
3．武玉英，劉相法，崔曉麗，申艷微，一種富硼微納米線的製備方法，專利號：ZL201410140561.1
4. 武玉英，劉相法，邊秀房，一種鎳-矽-硼中間合金及其製備方法，專利號：ZL200610044962.2
5. 武玉英，劉相法，張國華，李輝，馮增建，一種活塞用鋁基複合材料及其製備方法，專利號：ZL200910013842.X，授權日：2010年2月12日
6. 劉相法，武玉英，邊秀房，一種銅-矽-硼中間合金及其製備方法，專利號：ZL200610044961.8
7. 劉相法，武玉英，劉相俊，喬進國，邊秀房，一種低熔點銅-磷基中間合金及其製備方法，專利號：ZL200310105444.3
8. 劉相法，劉相俊，武玉英，一種矽基中間合金及其製備方法，專利號：ZL200610069260.X
9. 劉相法，左敏，姜琨，武玉英，一種鋁-鋯-磷中間合金及其製備方法，專利號：ZL200910016834.0
10. 劉相法，周曉璐，朱向鎮，武玉英，一種製備矽粉的方法，專利號：ZL201510582093.8
11. 劉相法，孫謙謙，韓夢霞，武玉英，一種鋁-磷-錫晶種合金及其製備方法，專利號：ZL2019101565933
科技獎勵
1. 納米晶種合金系列產品與耐熱高強輕金屬材料的創製及套用，山東省技術發明一等獎（技術發明）2017，（第二位）
2. 晶種型中間合金及其系列產品開發與套用技術，教育部高等學校科學研究優秀成果二等獎（技術發明）2014，（第二位）
3. 矽磷和鋁磷系動機活塞材料強化新技術，山東省技術發明二等獎，2010，（第三位）
主持項目
（1）國防課題，全波段****製造，2019-01至2024-12 在研，主持；
（2）山東省重點研發計畫，公益類，2019GGX102013，微納米Al3BC/鋁基晶種材料的原位合成與結構功能一體化設計，2019-01至2020-12，在研，主持；
（3）國防課題，新型****研究，2018-01至2021-12，在研，主持；
（4）山東省自然科學基金，面上項目，ZR201702200041，鋁矽活塞合金高溫增強機制的研究，2018-01至2020-12，在研，主持；
（5）山東大學青年學者未來計畫項目，2016-07至2020-06，在研，主持；
（6）山東省科技廳，泰山學者攀登計畫，高強低耗船舶發動機活塞研發及產業化項目，2014-01至2016-12，已完成，主持；
（7）企業橫向，鋁合金擺臂的設計與開發，2014-10至2015-10，已完成，主持；
（8）企業橫向，導電軌用鋁合金細化劑的開發，2014-12至2015-06，已完成，主持；
（9）973國家重點基礎研究發展計畫，2012CB825702、無序合金的熔化規律及其熔體結構、2012-06至2016-08，已完成，參與；
（10）國家自然科學基金，青年基金，51001065，Al-Si熔體中AlP異質形核界面原子吸附選擇規律性研究，2011-01至2013-12，已完成，主持；
（11）山東省中青年科學家科研獎勵基金，BS2009CL035，鋁矽活塞合金硼/碳除鈣及相關中間合金的研究，2009-12至2012-12，已完成，主持
社會任職
《精密成形工程》、《特種鑄造及有色合金》編委；J Alloy Compd、Composite part B等期刊審稿人
