陸龍生，男，華南理工大學機械與汽車工程學院教授。
基本介紹
- 中文名：陸龍生
- 出生日期：1981年8月
- 畢業院校：華南理工大學
- 職業：教師
- 性別：男
- 職稱：教授
研究方向,導師簡介,
研究方向
機械製造及其自動化。
導師簡介
1981年8月出生，博士，教授，博士生導師。現任華南理工大學機械與汽車工程學院副院長，廣東省功能結構與器件智慧型製造工程實驗室主任，廣東省智慧型與康復裝備工程技術研究中心技術委員會委員，中國機械工程學會微納製造技術分會委員，中國機械工程學會極端製造分會委員，中國刀協切削先進技術研究分會委員，中國機械工程學會高級會員、國際仿生工程學會會員、廣東省機械工程學會理事。獲廣東省自然科學基金傑出青年基金項目資助，入選“廣東特支計畫”科技創新青年拔尖人才、廣東省高等學校優秀青年教師。
長期從事微納結構先進制造技術及其功能套用的研究工作，感興趣的研究方向包括 ：表面熱功能結構、表面自清潔功能結構、電磁禁止功能結構、仿生功能結構等。主持承擔了國家重點研發計畫項目政府間專項1項，國家自然科學基金3項，省部級多項。在Science China-Technological Sciences、機械工程學報、International journal of machine tools and manufacture、International journal of heat and mass transfer等具有國際回響力的國內外期刊上發表SCI/EI收錄論文100餘篇，其中第一或通訊作者高水平論文近50篇，授權專利100餘項。目前擔任Ceramics International、Carbon、Tribology International、Corrosion Science、Advanced Materials Interfaces 、Journal of Materials Processing Technology、Materials & Design、Applied Physics A、Materials Letters、International journal of advanced manufacturing technology等20餘個學術期刊的審稿人。曾獲2016年國家科技進步二等獎（排名第4）、2013年廣東省自然科學二等獎（排名第4），2018年中國專利優秀獎，第五屆中國青少年科技創新獎。
代表性項目：
[1] 陸龍生，李凱凱，謝穎熙*，萬珍平，丁煥文，張志輝，湯勇. 脫附性醫用高頻電刀的研究現狀及發展趨勢. 機械工程學報，2020,56(1): 175-186
[2] Wentao Wang, Longsheng Lu*, Yingxi Xie, Zehong Li, Weibin Wu, Rongxuan Liang, Yong Tang. Controlling the laser induction and cutting process on polyimide films for kirigami-inspired supercapacitor applications. Science China Technological sciences, 2020, doi: 10.1007/s11431-019-1543-y
[3] Wentao Wang, Longsheng Lu*, Yingxi Xie, Xiaokang Mei, Yong Tang, Weibin Wu, Rongxuan Liang. Tailoring the surface morphology and nanoparticle distribution of laser-induced graphene/Co3O4 for high-performance flexible microsupercapacitors. Applied Surface Science, 2020, 504, 144487
[4] Xiaokang Mei, Longsheng Lu*, Yingxi Xie*, Yuxiang Yu, Yong Tang, Kwok Siong Teh. Preparation of Flexible Carbon Fiber Fabrics with Adjustable Surface Wettability for High-Efficiency Electromagnetic Interference Shielding. ACS Applied Materials & Interfaces, 2020, 12:49030-49041
[5] Yingxi Xie, Binbin Yang, Longsheng Lu*, Zhenping Wan, Xiaokang Liu. Shear strength of bonded joints of carbon fiber reinforced plastic (CFRP) laminates enhanced by a two-step laser surface treatment. Composite Structures 2020, 232, 1115598.
[6] Jiao Gao, Xiaokang Liu, Longsheng Lu*, Biao Tang, Yong Tang. The effect of electrical charge density on the transition behavior between bonding and clogging stages of an electroplated porous surface. Journal of Materials Processing Technology, 2019, 271: 1-9.
[7] Xiaokang Mei, Longsheng Lu*, Yingxi Xie*, Wentao Wang, Yong Tang, Kwok Siong Teh. An ultra-thin carbon-fabric/graphene/poly (vinylidene fluoride) film for enhanced electromagnetic interference shielding. Nanoscale, 2019, 11 (28), 13587-13599.
[8] Di Xing, Longsheng Lu*, Kwok Siong Teh*, Zhenping Wan, Yingxi Xie, Yong Tang. Highly flexible and ultra-thin Ni-plated carbon-fabric/polycarbonate film for enhanced electromagnetic interference shielding. Carbon, 2018, 132: 32-41.
[9] Longsheng Lu*, Jiawei Sun, Qiaopeng Liu, Xiaokang Liu, Yong Tang. Influence of electrochemical deposition parameters on capillary performance of a rectangular grooved wick with a porous layer. International Journal of Heat and Mass Transfer, 2017, 109: 737–745.
[10] Zhongfu Shen, Longsheng Lu*, Jiawei Sun, Feng Yang, Yong Tang, Yingxi Xie. Wear patterns and wear mechanisms of cutting tools used during the manufacturing of chopped carbon fiber. International Journal of Machine Tools and Manufacture, 2015, 97:1-10
