基本介紹
- 中文名：輸膠管
- 電力需求：交流220伏
- 功率：165W/米
- 感溫類型：K型熱電偶
參數,產品特點,Features,
參數
鐵弗龍管（四氟管） 內徑：8MM
膠管（成品）外徑:450MM
電力需求：交流220伏 50HZ 功率：165W/米
感溫類型：K型熱電偶
最大彎曲半徑：20cm
可承受溫度：Max250度
外接溫控表要求
控制輸出：繼電器ON/OFF控制 熱電偶K型
產品特點
Main Technical PARAMETERS
1、內膽採用進口的鐵氟龍管，具有良好的柔性、防粘性及耐高溫性(最高可達250度)，可大大減少炭化現象；
2、加熱器採用美國的加熱絲及耐高溫線，均勻地纏繞在喉管外壁，具有良好的絕緣性及均勻導熱、耐高溫性能：
3、採用高質量的保溫材料，確保喉這保溫性能。
4、良好的彎曲性能、耐折性能，依託於優質的材料(折不斷的加熱絲及耐高溫線)、合理的加工工藝設計，其最大彎曲半徑可達20cm。
5、長度及其它相關參數可按客戶需求製造。
Features
1. Its liner equipped with the imported Teflon hose has
find performance of flexibility,anti-sticking and high-temperature resistance (can reach as high as 250 degrees) so as to reduce the charring greatly.
2. The heater adopts the heating wires and the high-temperature resistance wire from U.S. which wind the outer wall of the hose evenly showing its fine perfomance in insulation, even thermal conduction and high-temperature resistance.
3. High-quality heat insulating matedal is adopted to ensure the heat insulation of the hollow throat.
4. Its fine performance of bending and folding depends on the quality material (unbroken heating wires and high-temperature wires) and reasonable processing technology to reach the maximum bending radius at 20 cm.
5. The length and other related parameters can be tailored per the customers' requirement
