基本介紹
- 中文名：趙麗濱
- 國籍：中國
- 民族：漢族
- 出生日期：1976年4月
- 畢業院校：北京航空航天大學
- 學位/學歷：博士
- 專業方向：固體力學
- 職務：博導
- 職稱：教授
工作經歷,研究方向,主要成就,個人作品,
工作經歷
2001年-2003年到清華大學工程力學系進行博士後研究工作。2003年10月到北京航空航天大學宇航學院任教。2008年-2009年赴英國南安普敦大學工程科學系進行學術訪問。2010年-2011於中國商用飛機有限責任公司北京民用飛機技術研究中心掛職鍛鍊。
獲得第二屆中國複合材料青年科學家獎、2016年杜慶華力學與工程獎優秀青年學者獎，2016何鴻燊獎教金一等獎，2011北航科學技術獎二等獎等多項獎勵。兼任中國複合材料學會監事會秘書；北京力學會副秘書長、固體力學專業委員會副主任委員；北方七省市力學學會學術工作委員會常務委員；國際華人計算力學學會執行委員會委員；航天一院一部科技委外聘專家等職。
研究方向
飛行器結構分析與最佳化設計
複合材料結構的破壞理論和力學設計
多場條件下多功能結構設計
主要成就
長期從事飛行器結構的破壞理論和力學設計研究，特別在先進複合材料結構方面，發展了先進複合材料結構宏微觀多重模式損傷耦合擴展的漸進失效理論，建立了全複合材料非平面膠接連線的破壞理論，提出一系列高精度的複合材料螺栓連線的失效預測方法。研究成果解決了6個航天型號歸零難題，並在航空航天5個型號研製中發揮了重要作用。
主持國家自然科學基金3項，工信部民機專項科研項目1項，863項目3項，航空、航天院所型號預研和攻關項目30餘項。以第一作者出版工信部“十二五”規劃專著《先進複合材料連線結構分析方法》，發表SCI論文40餘篇、EI論文45篇，授權發明專利16項，登記軟體著作權10項。
個人作品
1.Fengrui Liu, Xuheng Lu,Libin Zhao, Jianyu Zhang, Ning Hu, Jifeng Xu. An interpretation of the load distributions in highly torqued single-lap composite bolted joints with bolt-hole clearances. Composites Part B (2017), doi: 10.1016/j.compositesb.2017.11.027.
2.Yu Gong,Libin Zhao, Jianyu Zhang, Ning Hu. An improved power law criterion for the delamination propagation with the effect of large-scale fiber bridging in composite multidirectional laminates.Composite Structures, 2018, 184: 961-968.
3.Libin Zhao, Yang Li, Jianyu Zhang, Longwei Zhou, Ning Hu. A novel material degradation model for unidirectional CFRP composites. Composites Part B, 2018, 135: 84-94.
4.Yu Gong,Libin Zhao, Jianyu Zhang, Yana Wang, Ning Hu. Delamination propagation criterion including the effect of fiber bridging for mixed-mode I/II delamination in CFRP multidirectional laminates. Composites Science and Technology, 2017, 151: 302-309.
5.Libin Zhao, Yana Wang, Jianyu Zhang, Yu Gong, Zizi Lu, Ning Hu, Jifeng Xu. An interface-dependent model of plateau fracture toughness in multidirectional CFRP laminates under mode I loading. Composites Part B, 2017, 131: 196-208.
6.Libin Zhao, Meijuan Shan, Haiming Hong, Dexuan Qi, Jianyu Zhang, Ning Hu. A residual strain model for progressive fatigue damage analysis of composite structures. Composite Structures, 2017, 169, 69-78. 7.Libin Zhao, Meijuan Shan, Fengrui Liu, Jianyu Zhang. A probabilistic model for strength analysis of composite double-lap single-bolt joints. Composite Structures, 2017, 161: 419-427.
8.Libin Zhao, Yana Wang, Jianyu Zhang, Yu Gong, Ning Hu, Ning Li. XFEM-based model for simulating zigzag delamination growth in laminated composites under mode I loading. Composite Structures, 2017, 160: 1155-1162.
9.Libin Zhao, An Xin, Fengrui Liu, Jianyu Zhang, Ning Hu. Secondary bending effects in progressively damaged single-lap, single-bolt composite joints. Results in Physics, 2016, 6: 704-711.
10.Libin Zhao,Yu Gong, Jianyu Zhang, Yana Wang, Zizi Lu, Lei Peng, Ning Hu. A novel interpretation of fatigue delamination growth behavior in CFRP multidirectional laminates. Composites Science and Technology, 2016, 133: 79-88.
11.Jianyu Zhang, Longwei Zhou, Yuli Chen,Libin Zhao, Binjun Fei. A micromechanics-based degradation model for composite progressive damage analysis. Journal of Composite Materials. 2016, 50(16): 2271-2287. 12.Jie Zhi,Libin Zhao, Jianyu Zhang, Zhanli Liu. A numerical method for simulating the microscopic damage evolution in composites under uniaxial transverse tension. Applied Composite Materials. 2016, 23(3): 255-269.
13.Longwei Zhou, Donghua Zhang,Libin Zhao, Xiaohong Zhou, Jianyu Zhang, Fengrui Liu. Design and analysis of a novel bolted composite π joint under bending load. Materials and Design. 2016, 98: 201-208. 14.Libin Zhao, Jie Zhi, Jianyu Zhang, Zhanli Liu, Ning Hu. XFEM simulation of delamination in composite laminates. Composites Part A. 2016, 80: 61-71.
15.Jianyu Zhang, Dexuan Qi, Longwei Zhou,Libin Zhao, Ning Hu. A progressive failure analysis model for composite structures in hygrothermal environments. Composite Structures. 2015, 133: 331-342. 16.Jianyu Zhang,Libin Zhao, Ming Li, Yuli Chen. Compressive fatigue behavior of low velocity impacted and quasi-static indented CFRPlaminates. Composite Structures. 2015, 133:1009-1015.
17.Fengrui Liu, Jianyu Zhang,Libin Zhao, An Xin, Longwei Zhou. An analytical joint stiffness model for load transfer analysis in highly torqued multi-bolt composite joints with clearances. Composite Structures. 2015, 131:625-636.
18.Jianyu Zhang, Meijuan Shan,Libin Zhao, Binjun Fei. An average failure index method for the tensile strength prediction of composite adhesive-bonded π joints. J of Wuhan University of Technol-Mater. Sci. Ed. 2015, 30(2): 292-301.
19.Libin Zhao, Tianliang Qin, Jianyu Zhang, Yuli Chen. 3D gradual material degradation model for progressive damage analyses of unidirectional composite materials. Mathematical Problems in Engineering. 2015: 145629: 1-11.
20.Jianyu Zhang, Fengrui Liu,Libin Zhao, Meijuan Shan. Investigation on characteristic length testing methods for failure prediction of composite multi-bolt joints. Journal of Reinforced Plastics and Composites. 2015, 34(8): 636-648.
21.Jianyu Zhang, Fengrui Liu,Libin Zhao, Jie Zhi, Longwei Zhou, Binjun Fei. Influence of end distances on the failure of composite bolted joints. Journal of Reinforced Plastics and Composites. 2015, 34(5):388-404.
22.Libin Zhao, Tianliang Qin, Jianyu Zhang, Meijuan Shan, Binjun Fei. Determination method of stress concentration relief factors for failure prediction of composite multi-bolt joints. Journal of Composite Materials. 2015, 49(14): 1667-1680.
23.Libin Zhao, Yu Gong, Jianyu Zhang, Chen Yuli, Fei Binjun. Simulation of delamination growth in multidirectional laminates under mode I and mixed mode I/II loadings using cohesive elements. Composite Structures. 2014, 116:509-522.
24.Libin Zhao, Tianliang Qin, Yuli Chen, Jianyu Zhang. Three dimensional progressive damage models for cohesively bonded composite π joint. Journal of Composite Materials. 2014, 48(6):702-721.
25.Libin Zhao, Yana Wang, TianLiang Qin, Jianyu Zhang. A new material model for 2D FE analysis of adhesively bonded composite joints. Materials Science (Medziagotyra). 2014, 20(4): 468-473. 26.Jianyu Zhang,Libin Zhao,Tianliang Qin, Yue Fu, Binjun Fei. Influence of π overlaminates on the mechanical behavior of all-composite adhesively bonded π joints. Journal of Reinforced Plastics and Composites. 2014, v33(10):923-934.
27.Jianyu Zhang, Fengrui Liu,Libin Zhao, Binjun Fei.A novel characteristic curve for failure prediction of multi-bolt composite joints. Composite Structures. 2014, 108:129-136.
28.Jianyu Zhang, Fengrui Liu,Libin Zhao, Yuli Chen, Binjun Fei. A progressive damage analysis based characteristic length method for multi-bolt composite joints. Composite Structures. 2014, 108:915-923. 29.Fengrui Liu,Libin Zhao, Saqib Mehmood, Jianyu Zhang, Binjun Fei. A modified failure envelope method for failure prediction of multi-bolt composite joints. Composites Science and Technology. 2013, 83:54-63. 30.Libin Zhao, Yu Gong, Tianliang Qin, Saqib Mehmood, Jianyu Zhang. Failure prediction of out-of-plane woven composite joints using cohesive element. Composite Structures. 2013, 106:407-416.
31.Libin Zhao, Tianliang Qin, Jianyu Zhang, Ramanand Ajit Shenoi. Modified Maximum Stress Failure Criterion for Composite π Joints. Journal of Composite Materials. 2013, 47(23): 2995-3008.
32.Yue Fu, Jianyu Zhang,Libin Zhao. Strength prediction of composite π joint under bending load and study of geometric and material variations effects. Journal of Composite Materials. 2013, 47(8): 1029-1038. 33.Tianliang Qin,Libin Zhao, Jianyu Zhang. Fastener effects on mechanical behaviors of double-lap composite joints. Composite Structures. 2013, 100:413-423.
34.Jiqiang Tang, Yongbin Zhang, Shuzhi Sam Ge,Libin Zhao. Hollow interference fitted multi-ring composite rotor of the superconducting attitude control and energy storage flywheel. Journal of Reinforced Plastics and Composites, 2013, 32(12): 881-897.
35.Jianyu Zhang, Lei Peng,Libin Zhao, Binjun Fei. Fatigue dlamination growth rates and thresholds of composite laminates under mixed mode loading. International Journal of Fatigue. 2012, 40: 7-15. 36.Lei Peng, Jifeng Xu, Jianyu Zhang,Libin Zhao. Mixed mode delamination growth of multidirectional composite laminates under fatigue loading. Engineering Fracture Mechanics. 2012, 96: 676-686. 37.Libin Zhao, Xiaoxiao Zhang, Jianyu Zhang, Hai Huang, Xianzhu Liang. Failure analysis of woven composite π joint under bending load. Advanced Science Letters. 2011, 4(8-10): 2752-2758. 38.Lei Peng, Jianyu Zhang,Libin Zhao, Rui Bao, Hongqin Yang and Binjun Fei. Mode I delamination growth and thresholds of multidirectional composite laminates under fatigue loading. Journal of Composite Materials. 2011, 45(10): 1077-1090.
39.Libin Zhao, Tianliang Qin, R Ajit Shenoi, Jianyu Zhang, xianzhu Liang, Hai Huang. Strength prediction of composite π joint under tensile load. Journal of Composite materials. 2010, 44(23):2759-2778. 40.趙麗濱，劉豐睿，黃偉，張建宇.複合材料螺栓連線失效分析研究進展.強度與環境. 2017, 44(3): 1-11. 41.張建宇，劉豐睿，山美娟，趙麗濱.複合材料多釘連線釘載矢量感測器.複合材料學報. 2015, 32(5): 83-90.
42.趙麗濱,山美娟,彭雷,季少華,賈西文,徐吉峰.製造公差對複合材料螺栓連線結構強度分散性的影響研究.複合材料學報，2015, 32(4): 1092-1098.
43.趙麗濱，秦田亮，山美娟，張建宇.基於漸進損傷分析的複合材料螺栓連線強度包線法研究.複合材料學報, 2015, 32(3): 823-830.
44.趙麗濱，秦田亮，李嘉璽，付月.複合材料結構三維有限元分析的材料參數模型研究.北京航空航天大學學報. 2010, 36(7): 789-793.
45.趙麗濱，彭雷，張建宇，秦田亮，梁憲珠，常海峰，黃海.複合材料接頭拉伸力學性能的試驗和計算研究,複合材料學報,2009; 26(2): 181-186.
46.劉豐睿,趙麗濱,韓邦成,房建成.磁懸浮控制力矩陀螺框架結構的拓撲最佳化設計.北京航空航天大學學報. 2010, 36(4): 455-458.
47.湯繼強,張永斌,趙麗濱.過盈配合的金屬輪轂-複合材料飛輪轉子.光學精密工程. 2013, 21: 2639-2647. 48.趙麗濱,龍麗平,蔡慶雲.列車風致脈動力下聲屏障動力學性能研究.北京航空航天大學學報. 2009, 35(4): 505-508.
49.ZhangJianyu, Fu Yue,Zhao Libin, Fang Jiancheng.Analysis and Design of High-speed Flywheel on Satellite Energy Storage/Attitude Control System. Materials Science Forum. 2009, (610-613): 408-413. 50.趙麗濱,龍麗平,張建宇,韓邦成.反作用輪密封罩結構抗屈曲設計計算及試驗研究.北京航空航天大學. 2008, 34(12): 1464-1468.
51.Zhao Libin, Zhang Jianyu, Zhao Youxuan. Taylor Series Method in structural dynamics. Advances Materials Research. 2008, 33-37: 1213-1220.
52.趙麗濱,秦田亮,黃海,梁憲珠,曹正華.某複合材料接頭的強度估算.材料工程. 2007, S(1): 90-93. 53.Zhao Libin, Zhang Jianyu, Long Liping and Fei Binjun. Reliability Analysis of Multiple Site Damage Structure. Engineering Structural Integrity: Research development and application. 2007, 2: 948-951. 54.趙麗濱,趙友選,張建宇,韓邦成,房建成.反作用飛輪結構的動態最佳化設計.中國機械工程. 2007, 18(2): 139-142.
55.趙麗濱,張建宇,高晨光,韓邦成,房建成.基於結構可靠性的姿控/儲能飛輪轉子設計方法研究.宇航學報. 2006, 27(5): 942-946.
56.Zhao Libin, Yao Zhenhan. Fast Multipole BEM for 3-D Elastostatic Problems with Applications for Thin structures. Tsinghua Science and Technology. 2005.10(1): 67-75.
57.Zhao Libin, YaoZhenhan, Wang Shoumei.Stability and Accuracy Analysis for Taylor Series Numerical Method. Tsinghua Science and Technology. 2004, 9(1): 51-56.
58.Zhao Libin, YaoZhenhan, Wang Shoumei.Taylor Series Method in Nonlinear Structural Dynamics. Proceedings of the 5th international conference on vibration engineering. China Aviation Industry Press. 2002. 72-77.
59.趙麗濱,張建宇,王壽梅.非線性結構動回響的Taylor級數解法.北京航空航天大學學報, 2002, 28 (2): 153-156.
60.趙麗濱,張建宇,費斌軍,王壽梅.疲勞多裂紋問題的Taylor級數解法.機械強度, 2001, 23 (2): 168-170.
61.趙麗濱,張建宇,王壽梅.精細積分方法的穩定性和精度分析.北京航空航天大學學報, 2000, 26(5): 569-572.
