趙世偉，博士、副教授，華南理工大學電力學院碩士生導師，IEEE 會員 2000 年於中南大學信息工程學院自動化專業獲學士學位，2003 年於華南理工大學電力學院控制理論與控制工程專業獲碩士學位，2008 年於香港理工大學電機工程學系獲博士學位。2003 年至2005 年，於廣州智光電氣有限公司任開發工程師；2008 年至2009 年，於香港理工大學電機工程學系任副研究員；2009 年至2010 年，於香港理工大學電機工程學系從事博士後研究。自2010 年任教於華南理工大學電力學院，同年晉升為副教授，IEEE 會員。近年來主要從事微特電機設計與控制、電力電子技術以及新能源技術套用方面的研究工作，在相關研究領域發表以及錄用發表科技論文20 多篇，其中SCI、EI 收錄20餘篇，以第一作者發表SCI 收錄文章6 篇。
基本介紹
- 中文名：趙世偉
- 國籍：中國
- 職業：教師
- 畢業院校：中南大學
- 學位/學歷：博士
- 專業方向：電機與電器
- 職務：碩士生導師
基本情況,學習工作簡歷,學術兼職,主要科研方向與項目,研究方向,主要科研項目,主要學術成果,
基本情況
學習工作簡歷
2000 年於中南大學信息工程學院自動化專業獲學士學位，2003 年於華南理工大學電力學院控制理論與控制工程專業獲碩士學位，2008 年於香港理工大學電機工程學系獲博士學位。2003 年至2005 年，於廣州智光電氣有限公司任開發工程師；2008 年至2009 年，於香港理工大學電機工程學系任副研究員；2009 年至2010 年，於香港理工大學電機工程學系從事博士後研究。自2010 年任教於華南理工大學電力學院，同年晉升為副教授，
學術兼職
IEEE 會員。
主要科研方向與項目
研究方向
主要從事微特電機設計與控制、電力電子技術以及新能源技術套用方面的研究工作，
主要科研項目
1. 高效直線開關磁阻電機的高精度控制及其無位置感測器控制研究, 國家自然科學基金，2012年-2014年，主持
2. 直線開關磁阻電機的非線性建模與高精度位置控制,廣東省自然科學基金, 2011年-2013年，主持
3. 企業委託項目若干
2. 直線開關磁阻電機的非線性建模與高精度位置控制,廣東省自然科學基金, 2011年-2013年，主持
3. 企業委託項目若干
主要學術成果
在相關研究領域發表以及錄用發表科技論文20 多篇，其中SCI、EI 收錄20餘篇，以第一作者發表SCI 收錄文章6 篇。
主要發表文章
[1]S. W. Zhao, N. C. Cheung, W.-C. Gan, J. M. Yang and J. F. Pan, “A Self-Tuning Regulator for the High Precision Position Control of a Linear Switched Reluctance Motor,” IEEE Trans. on Ind. Electro., vol. 54, no. 5, pp. 2425-2434, Oct. 2007.
[2]S. W. Zhao, N. C. Cheung, W.-C. Gan, J. M. Yang and Q. Zhong, “Passivity-Based Control of Linear Switched Reluctance Motors with Robustness Consideration,” IET Electr. Power Appl., vol. 2, no. 3, pp. 164-171, May 2008.
[3]S. W. Zhao, N. C. Cheung, W.-C. Gan and J. M. Yang, “An Effective Modelling and Control Strategy for Linear Switched Reluctance Motors,” Proceedings of the Institution of Mechanical Engineers Part C: Journal of Mechanical Engineering Science, vol. 222, no. 11, pp. 2111-2121, Nov. 2008.
[4]S. W. Zhao, N. C. Cheung, W.-C. Gan and J. M. Yang, “Position Estimation and Error Analysis in Linear Switched Reluctance Motors,” IEEE Trans. on Instrum. and Meas., vol. 58, no. 8, pp. 2815-2823, Aug. 2009.
[5]S. W. Zhao, N. C. Cheung, W.-C. Gan and Z. G. Sun, “A Novel Flux Linkage Measurement Method for Linear Switched Reluctance Motors,” IEEE Trans. on Instrum. and Meas., vol. 58, no. 10, pp.3569-3575, Oct. 2009.
[6]S. W. Zhao, N. C. Cheung, W. C. Gan and J. M. Yang, “High Precision Position Control of a Linear Switched Reluctance Motor Using a Self-Tuning Regulator,” IEEE Transactions on Power Electronics, 2010, 25(11): 2820-2827.
[7]Z. G. Sun, N. C. Cheung, S. W. Zhao and W. C. Gan, “Application of Disturbance Observer Based Sliding Mode Control for Magnetic Levitation Systems”, Proc. Instn Mech. Engrs. Part C: Journal of Mechanical Engineering Science, vol. 224, no. 8, pp. 1635-1644, Aug. 2010.
[8]Z. G. Sun, N. C. Cheung, S. W. Zhao and W. C. Gan, “Magnetic Analysis of Switched Reluctance Actuators in Levitation Linear Transporters”, IEEE Transactions on Vehicular Technology, 2010, 59(9): 4280-4288.
[9]Y. Lu, K.W.E. Cheng and S. W. Zhao, “Power Battery Charger for Electric Vehicles”, IET Power Electronics, 2011, 4(5): 580-586.
[10]張宙, 趙世偉, 簡偉銓, 孫振剛, 郭新展. 一種基於直線開關磁阻電機的太陽跟蹤系統設計(英文). 控制理論與套用, 2008, (02): 316-320.
[11]S. W. Zhao, N. C. Cheung, Y. Lu, W.-C. Gan and Z. G. Sun, “A Linear Switched Reluctance Motor Based Position Tracking System,” The 13th International Power Electronics and Motion Control Conference (EPE-PEMC 2008), pp. 1221-1224, Poznan, Poland, 1-3 Sep. 2008.
[12]S. W. Zhao, N. C. Cheung, C. K. Lee, X. Y. Yang and Z. G. Sun, “Survey of modeling methods for flux linkage of switched reluctance motor”, 2011 4th International Conference on Power Electronics Systems and Applications (PESA2011), Hong Kong, 2011, 1-5.
[1]S. W. Zhao, N. C. Cheung, W.-C. Gan, J. M. Yang and J. F. Pan, “A Self-Tuning Regulator for the High Precision Position Control of a Linear Switched Reluctance Motor,” IEEE Trans. on Ind. Electro., vol. 54, no. 5, pp. 2425-2434, Oct. 2007.
[2]S. W. Zhao, N. C. Cheung, W.-C. Gan, J. M. Yang and Q. Zhong, “Passivity-Based Control of Linear Switched Reluctance Motors with Robustness Consideration,” IET Electr. Power Appl., vol. 2, no. 3, pp. 164-171, May 2008.
[3]S. W. Zhao, N. C. Cheung, W.-C. Gan and J. M. Yang, “An Effective Modelling and Control Strategy for Linear Switched Reluctance Motors,” Proceedings of the Institution of Mechanical Engineers Part C: Journal of Mechanical Engineering Science, vol. 222, no. 11, pp. 2111-2121, Nov. 2008.
[4]S. W. Zhao, N. C. Cheung, W.-C. Gan and J. M. Yang, “Position Estimation and Error Analysis in Linear Switched Reluctance Motors,” IEEE Trans. on Instrum. and Meas., vol. 58, no. 8, pp. 2815-2823, Aug. 2009.
[5]S. W. Zhao, N. C. Cheung, W.-C. Gan and Z. G. Sun, “A Novel Flux Linkage Measurement Method for Linear Switched Reluctance Motors,” IEEE Trans. on Instrum. and Meas., vol. 58, no. 10, pp.3569-3575, Oct. 2009.
[6]S. W. Zhao, N. C. Cheung, W. C. Gan and J. M. Yang, “High Precision Position Control of a Linear Switched Reluctance Motor Using a Self-Tuning Regulator,” IEEE Transactions on Power Electronics, 2010, 25(11): 2820-2827.
[7]Z. G. Sun, N. C. Cheung, S. W. Zhao and W. C. Gan, “Application of Disturbance Observer Based Sliding Mode Control for Magnetic Levitation Systems”, Proc. Instn Mech. Engrs. Part C: Journal of Mechanical Engineering Science, vol. 224, no. 8, pp. 1635-1644, Aug. 2010.
[8]Z. G. Sun, N. C. Cheung, S. W. Zhao and W. C. Gan, “Magnetic Analysis of Switched Reluctance Actuators in Levitation Linear Transporters”, IEEE Transactions on Vehicular Technology, 2010, 59(9): 4280-4288.
[9]Y. Lu, K.W.E. Cheng and S. W. Zhao, “Power Battery Charger for Electric Vehicles”, IET Power Electronics, 2011, 4(5): 580-586.
[10]張宙, 趙世偉, 簡偉銓, 孫振剛, 郭新展. 一種基於直線開關磁阻電機的太陽跟蹤系統設計(英文). 控制理論與套用, 2008, (02): 316-320.
[11]S. W. Zhao, N. C. Cheung, Y. Lu, W.-C. Gan and Z. G. Sun, “A Linear Switched Reluctance Motor Based Position Tracking System,” The 13th International Power Electronics and Motion Control Conference (EPE-PEMC 2008), pp. 1221-1224, Poznan, Poland, 1-3 Sep. 2008.
[12]S. W. Zhao, N. C. Cheung, C. K. Lee, X. Y. Yang and Z. G. Sun, “Survey of modeling methods for flux linkage of switched reluctance motor”, 2011 4th International Conference on Power Electronics Systems and Applications (PESA2011), Hong Kong, 2011, 1-5.
