賴晨光，教授，碩士生導師。重慶汽車工程學會理事、秘書長，重慶市航空學會副理事長。2000.09-2004.07，獲得吉林大學工業設計（汽車車身）專業學士學位；2004.09-2006.12，獲得吉林大學車身工程專業碩士學位；2007.10-2010.09，獲得日本東北大學航空宇宙工學專業博士學位。2004.07-2010.08，吉林大學汽車工程學院教師；2010.10-2011.02，日本東北大學流體科學研究所研究員；2011.02-,重慶理工大學車輛工程學院教師；2011.04-，日本東北大學共同研究員。在國內外重要刊物如InternationalJournal of Vehicle Design等發表論文30餘篇；主編教材1部。於2009年獲得全球卓越中心計畫（Global-COEProgram）“研究進步獎”,2012年獲得中國機械工業科學技術獎二等獎。
基本介紹
人物經歷,研究方向,主要項目,論文著作,
人物經歷
以研究支援者和博士後研究員身份在日本東北大學流體科學研究所工作多年，現為重慶理工大學汽車學院教師，日本東北大學共同研究員。參與和主持完成國家自然科學基金，日本東北大學 “汽車空氣動力學最佳化”等多項課題的研究和開發工作。在國內外重要刊物和國內外重要學術會議上發表學術論文十餘篇，多篇被SCI、EI等索引收錄。
研究方向
汽車和高速列車空氣動力學，車身設計與最佳化
主要項目
[1]高速氣動懸浮列車多向翼耦合壁面效應的機理研究，國家自然科學基金青年項目，2014.1-2016.12，26萬，主持。
[2]基於風洞的汽車空氣動力學設計及套用，重慶市重點產業共性關鍵技術創新專項，2016.3-2018.12，60萬，主持。
[3] The Theoretical Modes of the Wake Flow of RoadVehicles，日本東北大學共同研究（國際合作）項目，2015.4-2018.3，540萬日元，主持。
論文著作
- Chen-Guang Lai, Yasuaki Kohama, Shigeru Obayashi, Shinkyu Jeong. Investigation of Aerodynamic Performance due to the Interaction between the Rear Diffuser Angle and the Cooling Airflow Outlet [C]. SAE Technical Paper 2010-01-0290, Vehicle Aerodynamics, Detroit, MI, USA, 2010:139~158.
- Chen-Guang Lai, Yasuaki Kohama, Shigeru Obayashi, and Shinkyu Jeong. Experimental and Numerical Investigations on the Influence of Vehicle Rear Diffuser Angle on Aerodynamic Drag and Wake Structure [J]. JSAE Review – International Journal of Automotive Engineering. (accepted).
- Chen-Guang Lai, Shigeru Obayashi, Shinkyu Jeong, and Yasuaki Kohama. Influence of cooling exit flow on aerodynamic performance with different outlet layouts [J]. International Journal of Vehicle Design. (accepted).
- Chen-Guang Lai, Shigeru Obayashi, Yasuaki Kohama, Shinkyu Jeong. Influence of Vehicle Rear Shape on Aerodynamic Performance and Wake Structure [C]. Proceedings of Seventh International Conference on Flow Dynamics, Sendai, Japan, 2010: 112~113.
- Chen-Guang Lai, Yasuaki Kohama, Shigeru Obayashi, Shinkyu Jeong. Investigation of Aerodynamic Performance due to Automotive Engine-cooling Exit Flow [C]. Proceedings of Sixth International Conference on Flow Dynamics, Sendai, Japan, 2009: 282~283.
- Chen-Guang Lai, Shigeru Obayashi, Yasuaki Kohama, Shinkyu Jeong. Influence of the Layout of Engine-cooling Outlet on Automotive Aerodynamic Performance [C]. Proceedings of the 4th Sun – Tohoku University Joint Workshop on Next Generation Aero Vehicle, Seoul, Korea, 2009: 25~30.
- Chen-Guang Lai, Yasuaki Kohama. Trends of Aerodynamic Coefficients on Different Diffuser Angles of Passenger Vehicle [C].Proceedings of the 3rd Tohoku University – Seoul National University Joint Workshop on Next Generation Aero Vehicles, Sendai, Japan, 2008:14~19.
- Xingjun Hu, Limin Fu, Chen-Guang Lai, Bo Yang, Fuliang Wang, and Yingchao Zhang, Numerical Simulation on Three-Dimensional Unsteady Flow around Two Oppositely-Moving Vehicles [C].Proceedings of the 1st International Conference on Enhancement and Promotion of Computational Methods in Engineering Science and Mechanics, August 10-12, 2006, Changchun, China.
- 王靖宇,賴晨光,胡興軍,汽車底部外型對氣動特性的影響[J].中國公路學報，Vol. 21, No. 2, pp. 111~115. 2008.
- 傅立敏,賀寶琴,吳允柱,賴晨光，佇列行駛車輛間距對氣動特性的影響[J].汽車工程，Vo1．29, No.5, pp. 365~400, 2007.
- Chen-Guang Lai, Shigeru Obayashi, Shinkyu Jeong,and Yasuaki Kohama. Influence of Cooling Exit Flow on Aerodynamic Performancewith Different Outlet Layouts,International Journal of Vehicle Design,Vol. 59, No. 4, pp.331–349, 2012
- Chen-Guang Lai, Yasuaki Kohama, ShigeruObayashi, and Shinkyu Jeong. Experimental and Numerical Investigations on theInfluence of Vehicle Rear Diffuser Angle on Aerodynamic Drag and WakeStructure,International Journal of Automotive Engineering, Vol. 2,pp.47-53, 2011
- Chen-Guang Lai, Yasuaki Kohama, ShigeruObayashi, Shinkyu Jeong. Investigation of Aerodynamic Performance due to theInteraction between the Rear Diffuser Angle and the Cooling Airflow Outlet [C].SAE Technical Paper 2010-01-0290, Vehicle Aerodynamics, Detroit, MI,USA, 2010:139~158
Chen-guang LAI, Meng-hua DUAN, YanZHUANG, Yong-yan CHEN. Effect of Blade dip angle on InternalCharacteristic of hydraulic retarder,Hydromechatronics Engineering, Vol.43, No. 12, 2015, pp. 37-40
賴晨光，段孟華，莊嚴，陳小雄，陳永燕,葉輪葉片後彎角對壓縮機內流場的影響分析,製造業自動化,Vol. 38, No. 1
