許忠斌，男，浙江寧波人，工學博士，材料加工工程博士後，浙江大學教授/博士生導師。
基本介紹
學習及工作經歷,主要成果,研究領域,發表論文,
學習及工作經歷
1990年畢業於浙江大學化工系，同年免試直讀浙江大學流體工程研究所研究生，
1993年碩士畢業後到華南理工大學任教。
2001年塑膠機械博士畢業。其間曾借調到仲愷農業技術學院工作。
2001年9月至2003年8月在華南理工大學與順德市秦川恆利塑機公司從事材料加工工程博士後研究工作；
2003年9月調回到浙江大學工作。
2008年6月至2009年9月英國劍橋大學（University of Cambridge）訪問學者。
主要成果
主要從事微通道塑膠製品、塑膠機械和高分子材料成型加工的套用基礎研究，包括注射成型、擠出成型、注拉吹成型加工機械以及高性能納米塑膠、特種塑膠、導電塑膠加工等。近5年來，先後主持及參加國家自然科學基金面上項目、省部重大科技專項、國家重點實驗室基金、企業重大項目、國家自然科學基金重點項目等10餘項。在高性能塑膠加工和工程裝備方面取得了具有一定國際影響力的研究成果，並與英國劍橋大學的塑膠流變加工組建立了穩定的合作關係。
在國際上提出了一系列新的塑膠加工方法，包括特種工程塑膠、納米聚氨酯塑膠和導電塑膠等，部分工藝已設計出相應的生產設備，套用於新材料、包裝、塗料及塑膠機械等行業，取得了較好的經濟和社會效益。已在Sensor Actuat B-Chem, Appl. Phys. Lett., Polym Eng Sci, J Appl Polym Sci, Nanotech., Adv Funct Mater, J Mater Sci、化工學報、中國塑膠、高校化工學報、化工機械等國內外期刊發表學術論文50餘篇，其中被SCI、EI收錄30餘篇，已被國際同行他引總計120餘次。是國際期刊J Appl Polym Sci、化工學報等重要刊物的長期審稿人，兼任國內科技項目、科技獎勵、質量鑑定、學位論文等多個部門的評審專家。獲得授權國家發明專利及實用新型專利8項，另已公開發明專利5項。曾獲省部級科技進步一等獎、自然科學二等獎、湯氏優秀中青年教師獎和浙江大學教學成果二等獎、校級優秀班主任等榮譽稱號。
研究領域
①微通道塑膠製品成型加工、微混合器結構最佳化、微流體器件與系統；
②新型包裝材料、多孔吸聲材料、納米聚氨酯及導電塑膠加工技術；
③高效節能塑膠機械，包括注射成型、擠出成型、注拉吹成型加工機械。
發表論文
Selected journal papers:
[56] Liangyao Su, Pengfei Wang, Zhongbin Xu, Mao Peng, Dong Chen. Oscillatory shear-induced alignment of ketjen black conductive particles in polylactic acid and its effect on the electrical anisotropy[J]. Journal of Polymer Science Part B: Polymer Physics, 2016, 54(3): 369-373.
[55] 王柏村, Yifeng Hong, 王鵬飛, 許忠斌. 梯度多孔材料部分填充圓管強化換熱的研究. 熱能動力工程. 2016, 08. (已錄用)
[54] Baicun Wang, Yifeng Hong, Liang Wang, Pengfei Wang,Zhongbin Xu. Development and numerical investigation of novel gradient-porous heat sinks [J]. Energy Conversion and Management. 2015, 106: 1370-1378.
[53] Baicun Wang, Yifeng Hong, Xiangtao Hou, Zhongbin Xu, Pengfei Wang, Xudong Fang, and Xiaodong Ruan. Numerical configuration design and investigation of heat transfer enhancement in pipes filled with gradient porous materials. Energy Conversion and Management. 2015, 105: 206-215.
[52] 蘇良瑤, 鄭素霞, 許忠斌, 彭懋.疊加振動剪下對 PE—LLD 的結晶性能與力學性能影響. 工程塑膠套用. 2015, 41(6): 39-43.
[51] 談衛國, 許忠斌, 蔣興浩.聚合物微納加工設備的研究進展. 橡塑技術與裝備. 2015 (2): 014.
[50] 許忠斌, 劉雨, 鄭素霞, 蘇良瑤, 沈雪明, 劉國林.塑膠振動加工與樣品成型一體化試驗機的研製. 高分子材料科學與工程. 2015(2): 022.
[49] Zhongbin Xu, Liangyao Su, Shichao Jiang, Wei Gu, Mao Peng, and Pengfei Wang. Crystallization behavior and water vapor permeability of poly (lactic acid) nanocomposite under oscillatory shear. Journal of Applied Polymer Science. 2015, 132 (30): 42321.
[48] Zhong-bin Xu, Liang-yao Su, Peng-fei Wang and Mao Peng. Effect of oscillatory shear on the mechanical properties and crystalline morphology of linear low density polyethylene. Chinese Journal of Polymer Science.2015, 33 (8): 1114-1124.
[47] Zhongbin Xu, Baicun Wang, Sanming Zhang, Rongjun Chen. Design and acoustical performance investigation of sound absorption structure based on plastic micro-capillary films. Applied Acoustics. 2015, 89: 152-158.
[46] Zhongbin Xu, Baicun Wang, Zheyun Xu. Processing Methods and Applications. Encyclopedia of Biomedical Polymers and Polymeric Biomaterials. CRC Press, Taylor and Francis, 1st edition, April, 2015.
[45] Zhongbin Xu, Zheyun Xu, Jiapei Cao, Xiaodong Ruan, Rongjun Chen. Development and Characterization of a Novel Polymer Microchannel Tube. Polymer-Plastics Technology & Engineering, 2014, (53)14:1442-1449.
[44] 侯向陶, 許忠斌, 顧雲柱.塑膠管道失效分析及壽命預測的研究進展. 中國塑膠. 2014 (7):005.
[43] 王金蓮, 黃慶達, 許忠斌, 沈雪明, 張本西.微注塑成型技術研究現狀與發展. 塑膠工業. 2014, 42(8):16-20.
[42] 王珏, 袁衛明, 黃慶達, 許忠斌, 鄭素霞.高效節能雙組份注塑系統及設備開發. 輕工機械. 2014, 32(3):1-5.
[41] 黃慶達, 許忠斌, 王珏, 施優優, 周巨棟, 張本西, 劉國林. 差動傳動式微型注塑機注射系統的設計與開發. 化工機械. 2014 (4): 438-441.
[40] Suxia Zheng, Liangyao Su, Chunhui Li, Zhongbin Xu*. Numerical simulation of the micromixing induced by ultrasonic vibration of sidewall-trapped microbubbles. Applied Mechanics and Materials, 2013, vol.275-277, 618-621.
[39] 許忠斌，黃慶達，劉國林，傅新. 光流體技術及其套用研究進展. 液壓與氣動，2013, 6，1-6
[38] 許忠斌，楊世鵬，劉國林，阮曉東.微泵的研究現狀與進展. 液壓與氣動，2013, 6，7-12
[37] Jiapei Cao, Zhongbin Xu*, Baicun Wang, Rongjun Chen. Influence of injection air pressure on the microcapillary formation within extruded plastic films. Journal of Materials Science. 2012, 47(23), 8188-8196.
[35] Zhongbin Xu, Baicun Wang, Jiapei Cao, Yu Liu. Manufacturing process design of multi-scale synthetic leaves based on microcapillary plastic film. Advanced Materials Research. 2012, 569, 268-272.
[34] Ri-Chao Zhang, Ai Lu, Zhong-Bin Xu*. Effect of molecular weight on crystallization of semirigid poly(phenylene sulfide) under shear flow. Journal of Applied Polymer Science, 2012, Vol.124, 1562–1569.
[33] Ri-Chao Zhang, Rong Li, Ai Lu, Zhijiang Jin, Baoqing Liu and Zhongbin Xu*. The glass transition temperature of poly(phenylene sulfide) with various crystallinities. Polymer international, 2012, DOI 10.1002/pi.4333
[32] Zhongbin Xu, Baicun wang. Primary study on synthetic leaf based on the microcapillary plastic film. 2012 International Conference on Materials for Renewable Energy & Environment, Beijing, China, May 18~20, 2012, Session Chairman of Energy-saving and environmentally friendly.
[30] Zhongbin Xu, Chunhui Li, Damien Vadillo, Xiaodong Ruan, Xin Fu. Numerical simulation on fluid mixing by effects of geometry in staggered oriented ridges micromixers, Sensor and Actuators B: Chemical. 2011,153(1), 284-292
[28] Zhongbin Xu. Polymer Microcapillary Film Extrusion Process and Applications. China International Packaging Forum 2010, Beijing, China, June1~4, 2010.
[27] Mao Peng, Mingxing Zhou, Zhijiang Jin, Weiwei Kong, Zhongbin Xu*, and Damien Vadillo, Effect of Surface Modification of Carbon Black (CB) on the Properties of CB/Polyurethane Foams. Journal of Materials Science, 2010(45): 1065-1073
[26] Zhong-bin Xu, Wei-wei Kong, Ming-xing Zhou and Mao Peng, Effect of Surface Modification of Montmorillonite on the Properties of Rigid Polyurethane Foam Composites, Chinese Journal of Polymer Science, 2010, 28(4), 615-624
[25] 曹佳培, 鄭素霞, 許忠斌. 微通道塑膠薄膜的擠出及套用前景.包裝工程, 2010，31(7): 114-122
[24] Zhongbin Xu, Yuqiang Zhang, Weirong Hong, Suxia Zheng. Electric Conductivity and Thermo-rheology Properties of Polyacrylonitrile/Nylon6 Composites filled with Carbon Black. Polymer-Plastics Technology & Engineering, 2009, 48( 3), 280-284
[23] Chun-hui Li, Zhong-bin Xu*, Xiao-bin Zhang，Ji-peng Chen. The Design of a Continuous Production Equipment of Carbon Nanotubes. The 9th China International NanoScience and Technology Symposium, Xiangtan, China, October 23~27, 2009
[22] 許忠斌，李春會等.高效節能全電動注塑機的研究與開發. 化工機械, 36(5),2009, 439-444
[21] Interdisciplinary Engineering Research on Equipment Design and Polymer Composites. 全英國浙江大學校友年會，2009.5.31，London, UK, 許忠斌, 特邀報告。
[20] 羅遠強，施優優，王珏，許忠斌，蔡周永，黃曉波. 精密注塑機新型合模機構，輕工機械，VOl.26（5），2008，10-13
[19] Hai-yun Ma, Li-fang Tong, Zhong-bin Xu, and Zheng-ping Fang. Functionalizing Carbon Nanotubes by Grafting on Intumescent Flame Retardant: Nanocomposite Synthesis, Morphology, Rheology, and Flammability. Advanced Functional Materials, 2008, 18, 414-421
[18] Zhongbin Xu, Xiling Tang, Jinyang Zheng. Thermal Stability and Flame Retardancy of Rigid Polyurethane Foams/Organoclay Nanocomposites, Polymer-Plastics Technology and Engineering, 2008, 47(11), 1-6
[17] Haiyun Ma, Lifang Tong, Zhongbin Xu, Zhengping Fang. Intumescent flame retardant -montmorillonite synergism in ABS nanocomposites, Applied Clay Science, V0l.42(1-2), 2008, 42(1-2)，238-245
[16] Zhongbin Xu, Xiling Tang, Aijuan Gu, Zhengping Fang. Novel preparation and mechanical properties of rigid polyurethanes foams/organoclay nanocomposites. Journal of Applied Polymer Science, 2007, 106(1), 439-447
[15] Haiyun Ma, Lifang Tong, Zhongbin Xu, Zhengping Fang, Yongming Jin and Fengzhu Lu. A novel intumescent flame retardant: Synthesis and application in ABS copolymer. Polymer Degradation and Stability,2007, 92(4): 720-726
[14] Zhongbin Xu, Chao Zhao, Aijuan Gu, Zhengping Fang, Lifang Tong. Effect of morphology on the electric conductivity of binary composites filled with carbon black. Journal of Applied Polymer Science, 2007, 106(3), 2008-2017
[13] Haiyun Ma, Lifang Tong, Zhongbin Xu and Zhengping Fang. Synergistic effect of carbon nanotube and clay for improving the flame retardancy of ABS resin. Nanotechnology, 2007, 18, 375602
[12] Zhenghong Guo, Lifang Tong and Zhongbin Xu, Zhengping Fang. Structure and properties of in situ compatibilized polystyrene/polyolefin elastomer blends. Polymer Engineering and Science, 2007, 47(6): 951-959
[11] Haiyun Ma, Lifang Tong, Zhongbin Xu and Zhengping Fang. Clay network in ABS-graft-MAH nanocomposites: Rheology and flammability. Polymer Degradation and Stability, 2007, 92(8): 1439-1445
[10] Zhongbin Xu, Suxia Zheng, Xiaoye Luo, Liqin Hu. Measurement and Analysis of Filling Factor in Twin-screw Extruders. 7th International Symposium on Test and Measurement, Beijing, China, August 5~8, 2007: 2906-2909
[9] Xiaoye Luo, Zhongbin Xu, Suxia Zheng, Zixuan Liu. Online Measurement of Local Residence Time Distribution of Screw Elements in Extrusion Processes. 7th International Symposium on Test and Measurement, Beijing, China, August 5~8, 2007: 3157-3160
[8] Juan Li, Lifang Tong, Zhengping Fang, Aijuan Gu, Zhongbin Xu. Thermal degradation behavior of multi-walled carbon nanotubes/polyamide 6 composites. Polymer Degradation and Stability, 2006, 91, 2046-2052.
[7] Haiyuan Ma, Zhongbin Xu, Lifang Tong, Aijuan Gu, Zhengping Fang. Studies of ABS-graft-maleic anhydride/clay nanocomposites: Morphologies, thermal stability and flammability properties. Polymer Degradation and Stability, 2006, 91, 2951-2959
[6] Xiaoye Luo, Zhongbin Xu*, Zhengping Fang. Influence of phase dispersant on the co-crosslinking of polyvinyl chloride with low density polyethylene. Polymer-Plastics Technology & Engineering, 2006, 45, 11,1271-1276
[5] Xian-Ming Zhang, Zhong-Bin Xu, Lian-Fang Feng, Guo-Hua Hu, Xiaobo Song. In-Line Residence Time Distribution in Co-Rotating Twin-Screw Extruders. Polymer Engineering and Science, 2006, 46, 510-519
[4] Zhongbin Xu, Lianfang Feng, Guohua Hu, Xiaobo Song, Xianming Zhang, Guangzan Li, Xueping Gu, Bogeng Li. An Improved Apparatus for In-line Measurement of the Residence Time Distribution of Thermomechanically Complex Systems. Plastics, Rubber and Composites, 2006, 35, 10, 439-446
[3] 張才亮，許忠斌，馮連芳. 苯乙烯存在下馬來酸酐熔融接枝聚丙烯的研究.高校化工學報, 2005, 19(5), 648-653
[2] Zhongbin Xu, Shunying Wu, Xiaosu Yi. Study on the Mechanism of Spinning Process of Screw Extrusion for High Performance Engineering Plastics. 3rd East-Asia Polymer Conference, Chengdu, China, June6-9, 2004
[1] 許忠斌, 黃步明, 吳舜英. 光碟基片精密注塑成型技術研究. 中國塑膠, 2003，17(4), 61-64
