表乾時間,單組份室溫硫化矽橡膠暴露在大氣環境裡固化過程中,用手指觸摸表面,黏性消失,不黏手的時間,具體套用時候應指出環境溫度。
基本介紹
- 中文名:表乾時間
- 外文名:tack-free
- 簡稱:TFT
- 測定方法:詳細可以參考GB/T 13477.5-2002
理論定義,測定方法,英文解釋,
理論定義
英文:tack free time,簡稱:TFT
測定方法原理:在規定條件下將密封材料試樣填充到規定形狀的模框中,用在試樣表面放置薄膜或者指接觸的方法測量其乾燥程度。報告薄膜或手指上無粘附試樣所需要的時間。
測定方法
詳細可以參考GB/T 13477.5-2002 建築密封材料試驗方法 第5部分:表乾時間的測定
英文解釋
The time period during which a sealant that is molded in the field remains tacky and is not yet fully serviceable. The tack-free time is a measure of the surface cure time and may generally be correlated to a variety of useful parameters such as the time interval before the sealant
(1) resists damage by touch or light surface contact,
(2) resists job-site or airborne dirt pick-up
(3) resists impinging rainfall.
The tack-free time is sometimes used as an on-the-job quality assurance test. A quality product that is consistent and reproducible will generally fall within a maximum and minimum tack-free time.
This test for tack-free time can be used at any temperature and humidity. It is important that if a sealant will be used in a climate quite different than the standard conditions called out in this test method, then those conditions be used to test the sealant.