范愛武，男，博士，華中科技大學能源與動力工程學院教授，博士生導師。
基本介紹
- 中文名：范愛武
- 學位/學歷：博士
- 職業：教師
- 專業方向：微尺度燃燒、電子器件散熱、催化燃燒、強化傳熱
- 任職院校：華中科技大學能源與動力工程學院
個人經歷,主講課程,研究方向,出版圖書,學術成果,榮譽獎項,
個人經歷
1991年9月～1995年7月 華中理工大學動力系，本科畢業。
1995年8月～1999年8月 巴陵石化公司岳陽石化總廠熱電廠，鍋爐車間技術員。
1999年9月～2004年5月 華中科技大學能源與動力工程學院，獲博士學位。
2006年1月～7月 東北師範大學留日預備學校，日語培訓。
2006年10月～2008年10月 日本東北大學，博士後。
2009年2月～ 2015年10月 華中科技大學，副教授。
2011年4月～ 2014年4月，工程熱物理系副主任。
2011年5月～ 華中科技大學，博士生導師。
2013年10月～ 2013年12月 日本東北大學，訪問學者。
2015年11月～ 華中科技大學，教授。
主講課程
講授《工程傳熱學》、《工程熱力學》、《基礎燃燒學》、《動力工程現代測試技術》、《多孔介質傳熱傳質理論》等課程。
研究方向
微尺度燃燒、電子器件散熱、催化燃燒、強化傳熱。
出版圖書
作者類型：
作者時間：2006年12月1日
《多孔介質傳熱傳質理論與套用》是2006年科學出版社出版的圖書，作者是劉偉。
學術成果
縱向課題：
1. 國家自然科學基金面上項目3項。
2. 湖北省自然科學基金1項。
3. 教育部留學回國人員科研啟動基金1項。
4. 重慶大學教育部重點實驗室開放基金1項。
5. 煤燃燒國家重點實驗室開放基金2項。
6. 華中科技大學自主創新基金2項。
橫向課題：
1. 四川空分設備有限責任公司委託項目。
2. 湖北中煙工業有限責任公司委託項目。
著作：
[1] 劉偉，范愛武，黃曉明，多孔介質傳熱傳質理論與套用，科學出版社。
[2] 范愛武，姚洪，劉偉，微小尺度燃燒，科學出版社。
[3] 黃曉明，劉志春，范愛武，工程熱力學，華中科技大學出版社。
[4] 黃曉明，許國良，劉志春，范愛武，方海生，工程熱力學，中國電力出版社。
國際期刊論文：
[61]X. Kang*, Y.C. Deng, J.Y. Wang, A.W. Fan*, A Versatile Numerical Tool for Simulating Combustion Features at Small-scales, Journal of Thermal Science, in press
[60]S.X. Wang, Z.L. Yuan, A.W. Fan*, A modified two-dimensional numerical method for prediction of outer wall temperature distribution of rectangular micro-combustors, International Journal of Hydrogen Energy, in press
[59]Z.L. Yuan, A.W. Fan*, The effects of aspect ratio on CH4/air flame stability in rectangular mesoscale combustors, Journal of the Energy Institute,
[58]A.W. Fan L.H. Li, W. Yang, Z.L. Yuan, Comparison of combustion efficiency between micro combustors with single- and double-layered walls: A numerical study, Chemical Engineering and Processing,
[57]S.X. Wang, Z.L. Yuan, A.W. Fan*, Experimental investigation on non-premixed CH4/air combustion in a novel miniature Swiss-roll combustor, Chemical Engineering and Processing,
[56]L.H. Li, W. Yang, A.W. Fan*, Effect of the cavity aft ramp angle on combustion efficiency of lean hydrogen/air flames in a micro cavity-combustor, International Journal of Hydrogen Energy,
[55]Y. Xiang, Z.L. Yuan, S.X. Wang, A.W. Fan*, Effects of flow rate and fuel/air ratio on propagation behaviors of diffusion H2/air flames in a micro combustor, Energy,
[54]W. Yang, L.H. Li, A.W. Fan*, H. Yao, Effect of oxygen enrichment on combustion efficiency of lean flames in a micro cavity-combustor, Chemical Engineering and Processing,
[53]L.H. Li, Z.L. Yuan, Y. Xiang, A.W. Fan*, Numerical investigation on mixing performance and diffusion combustion characteristics of H2 and air in planar micro-combustor, International Journal of Hydrog Energy,
[52]S.X. Wang, L.H. Li, Y.F. Xia, A.W. Fan*, Hong Yao, Effect of a catalytic segment on flame stability in a micro combustor with controlled wall temperature profile, Energy,
[51]S.X. Wang, L.H. Li, A.W. Fan*, Suppression of flame instability by a short catalytic segment on the wall of a micro channel with a prescribed wall temperature profile, Fuel,
[50]D.G. Ning, S.X. Wang, A.W. Fan*, H. Yao, A numerical study of the effects of CO2 and H2O on the ignition characteristics of syngas in a micro flow reactor, International Journal of Hydrogen Energy,
[49]X. Xiang, J.S. Yang, A.W. Fan*, W. Liu, A comparison between cooling performances of water-based and galliumbased micro-channel heat sinks with the same dimensions, Applied Thermal Engineering,
[48]A.W. Fan*, Y. Xiang, W. Yang, L.H. Li, Enhancement of hydrogen combustion efficiency by helium dilution in a micro-combustor with wall cavities, Chemical Engineering and Processing,
[47]D.G. Ning, A.W. Fan*, H. Yao, Effects of fuel composition and strain rate on NO emission of premixed counter-flow H2/CO/air flame, International Journal of Hydrogen Energy,
[46]D.G. Ning, Y. Liu, Y. Xiang, A.W. Fan*, Experimental investigation on non-premixed methane/air combustion in Y-shaped meso-scale combustors with/without fibrous porous media, Energy Conversion and Management,
[45]D.G. Ning, A.W. Fan*, H. Yao, Effect of radiation emission and reabsorption on flame temperature and NO formation in H2/CO/air counterflow diffusion flames, International Journal of Hydrogen Energy,
[44]A.W. Fan*, H. Zhang, J.L. Wan, Numerical investigations on flame blow-off limit of a novel microscale Swiss-roll combustor with a bluff-body, Energy,
[43]X. Xiang, Y. Fan, A.W. Fan, W. Liu, Cooling performance optimization of liquid alloys GaIny in microchannel heat sinks based on back-propagation artificial neural network, Applied Thermal Engineering,
[42]W. Yang, Y. Xiang, A.W. Fan*, H.g Yao, Effect of the cavity depth on the combustion efficiency of lean H2/air flames in a micro combustor with dual cavities, International Journal of Hydrogen Energy,
[41]J.L. Wan, A.W. Fan*, H. Yao, Effect of the length of a plate flame holder on the flame blowout limit in a micro-combustor with preheating channels, Combustion and Flame,
[40]Y. Liu, A.W. Fan*, H. Yao, W. Liu, A numerical investigation on the effect of wall thermal conductivity on flame stability and combustion efficiency in a mesoscale channel filled with fibrous porous medium, Applied Thermal Engineering,
[39]Y. Liu, D.G. Ning, A.W. Fan*, H. Yao, Experimental and numerical investigations on flame stability of methane/air mixtures in mesoscale combustors filled with fibrous porous media, Energy Conversion and Management,
[38]W. Yang, A.W. Fan*, H. Yao, Effect of inlet temperature on combustion efficiency of lean H2/air mixtures in a micro-combustor with wall cavities, Applied Thermal Engineering,
[37]J.L. Wan, A.W. Fan*, H. Yao, W. Liu, Experimental investigation and numerical analysis on the blow-off limits of premixed CH4/air flames in a mesoscale bluff-body combustor, Energy,
[36]W. Yang, A.W. Fan*, H. Yao, W. Liu, Effect of reduced pressures on the combustion efficiency of lean H2/air flames in a micro-cavity combustor, International Journal of Hydrogen Energy,
[35]J. Guo, Y.X. Yan, W. Liu, F.M. Jiang*, A.W. Fan*, Enhancement of laminar convective heat transfer relying on excitation of transverse secondary swirl flow, International Journal of Thermal Sciences,
[34]J.L. Wan, A.W. Fan*, Y. Liu, H. Yao, W. Liu, X.L. Gou, D.Q. Zhao, Experimental investigation and numerical analysis on flame stabilization of CH4/air mixture in a mesoscale channel with wall cavities, Combustion and Flame,
[33]Y.H. You, A.W. Fan*, Y.M. Liang, S.P. Jin, W. Liu, F.Q. Dai, Entropy generation analysis for laminar thermal augmentation with conical strip inserts in horizontal circular tubes, International Journal of Thermal Sciences,
[32]J.L. Wan, A.W. Fan*, H. Yao, W. Liu, Effect of thermal conductivity of solid wall on combustion efficiency of a micro-combustor with cavities, Energy Conversion and Management,
[31]W. Yang, A.W. Fan*, J.L. Wan*, W. Liu, Effect of external surface emissivity on flame-splitting limit in a micro-cavity combustor, Applied Thermal Engineering,
[30]J.L. Wan, A.W. Fan*, H. Yao, W. Liu, Flame-anchoring mechanisms of a micro cavity-combustor for premixed H2/air flame, Chemical Engineering Journal,
[29]J.L. Wan, A.W. Fan*, Effect of channel gap distance on the flame blow-off limit in mesoscale channels with cavities for premixed CH4/air flames, Chemical Engineering Science,
[28]J.L. Wan, A.W. Fan*, Effect of solid material on the blow-off limit of CH4/air flames in a micro combustor with a plate flame holder and preheating channels, Energy Conversion and Management,
[27]J.L. Wan, A.W. Fan*, H. Yao, W. Liu, A non-monotonic variation of blow-off limit of premixed CH4/air flames in mesoscale cavity-combustors with different thermal conductivities, Fuel,
[26]Y. Liu, A.W. Fan*, H. Yao, W. Liu, Numerical investigation of filtration gas combustion in a mesoscale combustor filled with inert fibrous porous medium, International Journal of Heat and Mass Transfer,
[25]J.L. Wan, A.W. Fan*, H. Yao, W. Liu, Effect of pressure on the blow-off limits of premixed CH4/air flames in a mesoscale cavity-combustor, Energy,
[24]A.W. Fan*, J.L. Wan, Y. Liu, et al., Effect of bluff body shape on the blow-off limit of hydrogen/air flame in a planar micro-combustor, Applied Thermal Engineering,
[23]J. Yang, A.W. Fan*, W. Liu*, A.M. Jacobi, Optimization of shell-and-tube heat exchangers conforming to TEMA standards with designs motivated by constructal theory, Energy Conversion and Management,
[22]J.L. Wan, Wei Yang, Aiwu Fan*, Yi Liu, Hong Yao, Wei Liu, Yiqing Du, Daiqing Zhao, A numerical investigation on combustion characteristics of H2/air mixture in a micro-combustor with wall cavities, International Journal of Hydrogen Energy,
[21]Y. Liu, J.Y. Zhang, A.W. Fan*, J.L. Wan, H. Yao, W. Liu, Y.Q. Du, Numerical investigation of CH4/O2 mixing in Y-shaped mesoscale combustors with/without porous media, Chemical Engineering and Processing,
[20]J.L. Wan, A.W. Fan*, H. Yao, W. Liu, X.L. Gou, D.Q. Zhao, The impact of channel gap distance on flame splitting limit of H2/air mixture in microchannels with wall cavities, International Journal of Hydrogen Energy,
[19]Y.H. You, A.W. Fan*, X.J. Lai, W. Liu, S.Y. Huang, Experimental and numerical investigations of shell-side thermo-hydraulic performances for shell-and-tube heat exchanger with trefoil-hole baffles, Applied Thermal Engineering,
[18]A.W. Fan*, J.L. Wan, K. Maruta, H. Nakamura, H. Yao, W. Liu, Flame dynamics in a heated meso-scale radial channel, Proceedings of Combustion Institute,
[17]Y.H. You, A.W. Fan*, X.J. Luo, S.P. Jin, W. Liu, S.Y. Huang, A theoretical investigation in the effects of recycles on laminar heat transfer enhancement of parallel-flow heat exchangers, Chemical Engineering and Processing,
[16]A.W. Fan*, J.L. Wan, Y. Liu, H. Yao, B.M. Pi, K. Maruta, W. Liu, The effect of the blockage ratio on the blow-off limit of a hydrogen/air flame in a planar micro-combustor with a bluff body, International Journal of Hydrogen Energy,
[15]A.W. Fan*, J.L. Wan, K. Maruta, H. Yao, W. Liu, Interactions between heat transfer, flow field and flame stabilization in a micro-combustor with a bluff body, International Journal of Heat and Mass Transfer,
[14]J. Guo, Y.X. Yan, W. Liu, F.M. Jiang*, A.W. Fan*, Effects of upwind area of tube inserts on heat transfer and flow resistance characteristics of turbulent flow, Experimental Thermal and Fluid Science,
[13]A.W. Fan*, H. Nakamura, K. Maruta, W. Liu, Experimental investigation of flame pattern transitions in a heated radial micro-channel, Applied Thermal Engineering,
[12]A.W. Fan, J.J. Deng, A. Nakayama, W. Liu*, Parametric study on turbulent heat transfer and flow characteristics in a circular tube fitted with louvered strip inserts, International Journal of Heat and Mass Transfer,
[11]Y.H. You, A.W. Fan*, W. Liu, S.Y. Huang, Thermo-hydraulic characteristics of laminar flow in an enhanced tube with conical strip inserts, International Journal of Thermal Sciences,
[10]J.L. Wan, A.W. Fan*, K. Maruta, H. Yao, W. Liu, Experimental and numerical investigation on combustion characteristics of premixed hydrogen/air flame in a micro-combustor with a bluff body, International Journal of Hydrogen Energy,
[9]Y.H. You, A.W. Fan*, S.Y. Huang, W. Liu, Numerical modeling and experimental validation of heat transfer and flow resistance on the shell side of a shell-and-tube heat exchanger with flower baffles, International Journal of Heat and Mass Transfer,
[8]H. Nakamura, A.W. Fan, S, Minaev, E. Sereshchenko, R. Fursenko, Y. Tsuboi, K. Maruta*, Bifurcations and negative propagation speeds of methane/air premixed flames with repitative extinction and ignition in a heated microchannel, Combustion and Flame,
[7]A.W. Fan, J.J. Deng, J. Guo, W. Liu*, A numerical study on thermo-hydraulic characteristics of turbulent flow in a circular tube fitted with conical strip inserts, Applied Thermal Engineering, 3
[6]A.W. Fan*, S. Minaev, S. Kumar, W. Liu and K. Maruta, Experimental investigation on flame pattern formations of DME–air mixtures in a radial microchannel, Combustion and Flame,
[5]A.W. Fan, S. Minaev, E. Sereshchenko, R. Fursenko, S. Kumar, W. Liu, K. Maruta*, Experimental and numerical investigations of flame pattern formations in a radial microchannel. Proceedings of Combustion Institute,
[4]A.W. Fan*, S. Minaev, E. Sereshchenko, Y. Tsuboi, H. Oshibe, H. Nakamura, K. Maruta, Propagation dynamics of splitting flames in a heated microchannel, Combustion, Explosion and Shock Waves,
[3]H. Nakamura, A.W. Fan, H, Minamizono, K. Maruta, H. Kobayashi, T. Niioka, Bifurcations of stretched premixed flame stabilized by a hot wall, Proceedings of the Combustion Institute,
[2]A.W. Fan*, S. Minaev, S. Kumar, W. Liu, K. Maruta, Regime diagrams and characteristics of flame patterns in radial microchannels, Combustion and Flame,
[1]A.W. Fan*, S. Minaev, S. Kumar, W. Liu, K. Maruta, Experimental investigation on flame pattern formations and combustion completeness in a radial microchannel, Journal of Micromechanics and Microengineering,
榮譽獎項
1. Chemical Engineering and Processing雜誌封面論文。
2. 國家優秀碩士生獎學金獲得者（2名）指導老師。
3. ESI Hot Paper一篇。
4. ESI Highly Cited Paper兩篇。
5. 國家優秀博士生獎學金獲得者指導老師。
6. 華中科技大學優秀科研工作者。
7. 教育部科技進步一等獎。
8. ESI Highly Cited Paper兩篇。
9. 湖北省優秀學士學位論文指導老師。
10. ESI Highly Cited Paper一篇。
11. 國家優秀博士生獎學金獲得者指導老師。
12. 湖北省優秀學士學位論文指導老師。
13. 華中科技大學教學質量二等獎。
14. Journal of Micromechanics and Microengineering雜誌年度亮點文章。
15. 華中科技大學研究生科技十佳。
