目錄
PREFACE
Volume 1
KEYNOTE LECTURES
Damage evaluation, seismic capacity evaluation and retrofit techniques of R/C buildings in Japan
Hiromi Adachi, Mitsukazu Nakanishi and Keiji Kitajima
Recent advances of intelligent health monitoring systems for civil infrastructures in HIT
Jinping Ou
Probability density evolution method for dynamic reliability assessment
Jie Li and Jianbing Chen
SECTION 1NEW THEORY AND METHOD OF STRUCTURAL ANALYSIS AND DESIGN
Story shear coefficient for shear failure of beam-to-column joint in reinforced concrete buildings
Jiandong Zhou, Masaya Hirosawa and Tatsuya Komuro
Computational synthesis of three-dimensional discrete structures
Xianzhong Zhao and Kristina Shea
Objective functions for finite element model updating in structural dynamics
Bijaya Jaishi and Weixin Ren
Connection of steel moment-resisting frames with opening on beam web *
Jiping Ru and Bo Li
Effective width and rigidity of steel-concrete composite beam*
Jianguo Nie and Chunyu Tian
Nonlinear analysis of single-layer reticulated shells
Yingbo Chen, Qiusheng Li and Junming Chen
Dynamic and equivalent-static wind-resistant analysis for single-layer reticulated shells based on wind tunnel tests
Yuanqi-Li, Zuyan Shen and Yukio Tamura
Behaviour of composite cross-sections with partial shear connection
Jing Ji , Xiaolei Han and M. A. Bradford
Multi-wave post-buckling analysis of thin-walled members*
Zhong Tao, Liaoyuan Ye, Baokang He and Suzuki Yoshiyuki
New advances in theory of stability of steel structures
Genshu Tong and Tao Ren
Theoretical analysis and test studyfor axial compression bearing capacity of CFST
Junhai Zhao, Shufang Ma, Xueying Wei and Lin Ji
Local and distortional buckling stress methods of open cross-section thin-walled columns
Sumei Zhang and Sheng Wu
Review and new proposals for performance indices of flexural members*
Peng Feng, Lieping Ye, Heng Zhao and Jiangbo Zhuang
Analysis and design method for point-supported laminated and mid-hollow glass panels
Ying Ma, Yongjiu Shi and Yuanqing Wang
Numerical simulation and experimental study on bolted end-plate connections*
Gang Shi, Yongjiu Shi, Yuanqing Wang and Hong Chen Influence of the glass mass on dynamic performance of point supported glass curtain wall flexible supporting system
Zhihong Ren, Yuanqing Wang and Yongjiu Shi Effects of low temperature on calculation of fracture parameters of structural Steels *
Yanmin Wu, Yuanqing Wang Yongjiu Shi and Jianjing Jiang Recursive random finite element method*
Bin Huang, Wen jun Liu and Weilian Qu Mixed-elastoplastic development analysis of 3-d steel structure based on thin-wall structure theory*
Menghong Wang and Qingshan Yang Studies on local-buckling behavior of tapered H-section members*
Na Yang, Qingshan Yang, Shizhao Shen and Xudong ZhiNonlinear analysis of rectangular concrete-filled tubular column to steel beam connections with sided plates
Jiping Ge and Zhouhong Zong Evaluation of the structural expected loss in the life cycle with fuzzy theory*
Gang Li Relationships between material properties and section ductility of prestressed high-strength concrete beam
Limei Zhang, Shunbo Zhao and Chengkui Huang A new beam model based on the Timoshenko beam
Songtao Xue, Chunfeng Wan and Rong Chen Formulae for computing bulk-solid pressure in squat silos
Fang Yuan, Fuming Wang, Xing Shao and Xinnan Gao The restraint influence coefficient method to analyze creep and shrinkage effect on prestressed concrete bridges*
Di Hu, Mian Tang and Zhengqing Chen An approach for foundation dynamic impedance matrix and numerical comparisons*
Xingmin Hou, Hui Deng and Zhiguang Gao Improvement of artificial boundary in ANSYS/LS-DYNA
Haiping Ding, Dongyin Zhang, Xin Jin and Ge Kong Form finding of membrane structures based on nonlinear displacement analysis
Hongxia Wan, Junming Chen and Daihua Wu Punching shear strength analysis of slab-column connections
Xueying Wei, Shufang Ma and Guoliang Bai Nonlinear analysis based finite element methods on steel structure under cyclic loading*
Hong Zheng Study on failure criteria and constitutive relationship of bond-slip in steel reinforced concrete structure *
shansuo Zheng, Guozhuan Deng and Maohong Yu Multi-surface strength model for concrete beam-column joints subjected to cyclic loading
Zhengnan Yin,Qiwei Zhang and Maohong Yu The generalized finite element method on eight-node element meshes
Ziqiang peng and Jianwei Tu Spatial geometric nonlinear analysis method based on torsion-warping stability interpolation function
Jian Liu, Xiangyun Huang, Ming Xu, Kaixi Li and Minhui Zhou The calculation methods for steel frarne structure based on structural ultimate bearing capacity
Jian Liu, Xiangyun Huang, Li Zhang, Kaixi Li and Minhui Zhou Grey correlation index analysis of bearing capacity on concrete filled steel tubular compression members *
Chengxiang Xu, Lihua Xu and Guofeng Du Selection and design of concrete frames filled with steel tubes
Hailin Lu and Chengxiang Xu
SECTION 2VIBRATION CONTROL AND HEALTH MONITOR OF STRUCTURE
Experimental study of cable vibration control
C. S. Cai and W. J. Wu
Reduction of the pounding effect between bridge girders induced by spatially varying ground motions
Hai Su, Hong Hao and Nawawi Chouw Passive auto-adaptive seismic resistant structures and their development
Lieping Ye, Asad Ullah Qazi and Xunliu Wang Mechanical theory of Encapsulated FBG strain sensors used for structural health monitoring*
Zhi Zhou, Jilong Li and Jinping Ou Structural damage detection based on the correlation analysis between the wavelet packet component energies
Guirong Yan, Zhongdong Duan and Jinping Ou Error compensation technique for the structural health monitoring sensor systems
Jun Teng, Hongjun Liu and Weilian Qu The application method of the intelligent sensor systems for the structural health monitoring systems *
Jun Teng, Weilian Qu and Hongjun Liu
A study on strain-sense and actuated properties of TINI shape memory alloys*
Hui Li, Zhiqiang Liu and Wenli Chen
Dynamic performance of a concrete cable-stayed bridge with single tower using ambient vibration testing
Zhouhong Zong, Yi Ruan andWeiaxin Ren
Wavelet based damage identification of beams
Jiangang Han, Zengshou Sun and Weixin Ren
Further analysis of the brace forces of pall frictional dampers *
Bin Wu and Jigang Zhang
A practical design method of nonlinear passive dynamic absorbers for wind-induced vibration control of high-rise structure
Mingyun Lv, Zhe Wu and Weilian Qu
Shaking table test on ship lifts model with roof MR damper isolation system
Mingyun Lv, Zhe Wu and Weilian Qu
Key parameters that influence performance of shear-valve magnetorheological fluid damper *
Xinchun Guan, Jinhai Li and Jinping Ou
Structural damage detection method based on incomplete modal information study
Hui Liu and Weilian Qu
Empirical mode decomposition and its application
Danjiang Yu and Weixin Ren
Seismic response analysis of the complex system consisting of a huge subway platform and the corresponding upper structure*
Weiming Yan, Haoxiang He, Libo Wu and Jinbao Ji
Sensitivity analysis of modal parameters of buildings in damage detection*
Hongping Zhu, Dansheng Wang and Bao He
Numerical research on real-time structural damage alarming based on wavelet packet analysis*
Youliang Ding, Aiqun Li and Xiaolin Han
Review on serviceability design of vibration structure
Zhigang Song and Weiliang Jin
Megaframe structures with control devices*
Yuji Tian, Qingshan Yang and Zongjian Lan
Structural damage detection based on neural network algorithm through changes in local strain mode shapes *
Lin Li, Hongping Zhu and Kezhu Hong
Vibration control of seismic response of adjacent buildings coupled with semi-active MR dampers*
Hongjun Liu and Jun Teng
Application of linear friction dampers to adjacent buildings*
Lingyun Peng, Weiming Yan and Jinbao Ji
OTE control using an active mass driver system*
Runlin Yang, Weiming Yan, Xiyuan Zhou, Jinbao Ji and Xihui Liu
The research on the initial permeability and stress of ferromagnetic materials*
SheLiang Wang, Wei Wang, Xiangyun Huang, Ruijie Liu and Zhongming Xiong
Research on damp capacity of passive isolation device based on shape memory alloy re-centring dampers
Sheliang Wang, Xiang Zhao, Ruijie Liu and Zhongming Xiong
Analysis on seismic responses of hybrid control system combining SATMD with energy dissipation u
Jianyang Xue, Jianzhong Zhou and Hongtie Zhao
Analysis on seismic responses of base-isolated structures with lead rubber bearings under biaxial ground excitations
Jianqiang Wang and Qianfeng Yao
Continuum method of shear wall structure with energy dissipation devices*
Wenfeng Liu, Liyan Gao and Jieying Sui
Little-character-toggle-brace-damper seismic energy dissipation systems
Jieying Sui, Wenfeng Liu and Xiangmei Yan
Dynamic analysis of a vibration absorption system of a mega frame via considering the influence of substructure
Jianlin Zhang, Xun'an Zhang and Jiesheng Jiang
Damage detection use two dimensional wavelet*
Xindong Zhao, Sheliang Wang and Jinghui Zhang
Inverse neural network and its application on MR dampers
Jianwei Tu and Zhiqiang Peng
SECTION 3 DISASTER-PREVENTION AND DISASTER-REDUCTION FOR STRUCTURAL ENGIN-
EERING
Comparition of intraplate ENA seismic model and recorded strong motion in western Australia
Hong Hao and Brian A. Gaull
Numerical simulation of damage of masonry and masonry infilled RC frame structures to blast ground motions
Chengqing Wu, Hong Hao and Yong Lu
Performance based seismic reliability evaluation of RC frames
Yong Lu and Xiaoning Gu
A study of the higher mode effect and load pattern selection in pushover analysis
Shuang Hou and Jinping Ou
Effects of the column-to-beam strength ratio on earthquake responses of CFT moment resistant frames permitting inner columns to yield
Peizhen Xu and A. Kawono
Study on seismic behavior of a high-rise building of frame-shear wall structure with high transfer story
Xiangyun Huang, Fulin Zhou, Sheliang Wang, Jianmin Jin and Xuehai Lou
Seisimic response analysis of arch dam-compressible water-foundation rock systems*
Xiuli Du and Jinting Wang
Compressive and flexural behaviour of concrete filled steel tubes after exposure to standard fire*
Linhai Han, Jingsi Huo and Yongchang Wang
Nonlinear finite element analysis of transient thermal field for planar reinforced concrete frame in fire*
Bo Wu and Xiyang He
Experimental study on seismic performance of corroded reinforced concrete members with flexure and compression *
Ditao Niu, Xinxiao Chen and Xuenin Wang
Finite element analysis of 3D temperature fields in structures subjected to fire*
Yongjun Liu , Weicheng Fan and Hongnan Li
Seismic reponse of MDOF systems by wavelet transform
Meiling Xiao, Liaoyuan Ye and Hongtie Zhao
Review on application of artificial neural networks in earthquake resistant and disaster prevention
Benyu Liu and Liaoyuan Ye
Analysis modles and methods for structural response of spatially varying ground motions
Xuemei Li
Research on strong ground motion selected for structural analysis under seldom occurred earthquake
Guoliang Bai, Zihui An, Tao Wu and Jianguang Yue
Study on the distribution of near-fault strong ground motion and the safe distance of structure near fault*
Qifang Liu, Haiping Ding and Xin Jin
Study on drift limits of RC structures under frequently occurring earthquakes*
Zixiong Guo
Research on damage of RC beams in fire (elevated temperature) environments
Guanglin Yuan, Cao Guo and Fangyi Huang
Experimental study on seismic performance of steel reinforced high-strength concrete columns*
Junhua Li, Hongtie Zhao, Jianyang Xue and Linke Wang
Maintenance strategy analysis for existing aseismatic structure based on minimal expected total cost*
Haiwen Teng and Shitao Xu
Seismic response of X-shaped plan frame supported shear wall structure.
Part I : shaking table test
Yanxia Ye, Xingwen Liang and Yun Zhou
Seismic response of X-shaped plan frame supported shear wall structure.
Part Ⅱ: Elasto-plastic analysis
Yanxia Ye, Xingwen Liang and Qingning Li
The mode superposition method with the second order matrix perturbation technique for structural nonlinear response to earthquake excitations
You fa Yang and Shuai Li
Aseismatic carpentry of ancient Chinese timber buildings *
Dafeng Gao, Hongtie Zhao and Jianyang Xue
Research on the seismic behavior of concrete-filled steel tubular frame
Bin Li and YangWen
Volume 2
SECTION 4NEW STRUCTURAL SYSTEMS AND NEW MATERIALS
Fundamental problems in the modeling analysis of FRP/concrete hybrid structural members
Z. J. Wu and J. M. Davies
Advanced glued laminated construction and its engineering applications *
Weiqing Liu and Huifeng Yang
Composites fiber reinforced polymer rebar for concrete structures *
Bo Wang, Jinping Ou , Xinyue Zhang , Zheng He and Minzhong Qian
Structural behavior of composite slim beam
Yongjiu Shi, Qiuzhe Li and Yuanqing Wang
Study on the staggered-steel truss system*
Xuhong Zhou, Yongjian Liu, Qishi Zhou and Tao Mo
Several types of high-rise solar building structures and their related key problems
Bo Wu, Hongwei Ma, Lan Chen and Xiyang He
Bearing capacity of gear-type SFRC pile theory based on meso-mechanics *
Jisheng Zhao, Xiaxin Tao, Lijing Shi and jinping Ou
Wrinkling of membranes: state of the art*
Zuowei Li, Qingshan Yang and Ruixia Liu
Details of secondary geodesic line method for membrane cutting pattern generation*
Feng Tan and Qingshan Yang
Aeroelastic dynamic equation of wind-structure interaction of membrane roofs with small sag
Ruixia Liu, Qingshan Yang and Zuowei Li
Construction analysis of tensile structures *
Bo Li, Qingshan Yang, Feng Tan and Menghong Wang
The study on the dynamic properties of arched corrugated metal roof
Chengdong Tan, Yuanqing Wang and Yong Zhang
Influence of chord stress on axial strength of rectangular tubular T- and TX-joints
Lei Zhu, Yongjiu Shi, Yuanqing Wang and Hong Chen
The analysis of calculating and design method for load bearing glass structure
Hengqiu Zhang, Yuanqing Wang and Yongjiu Shi
Research on.dynamic property of cylindrical latticed intersected 3D beam system reticulated mega structure with single layer latticed shell substructure *
Yongjun He, Xuhong Zhou and Shilin Dong
The analysis of the mechanism of the rigid reinforced layer of tube-in-tube
Haiqing Liu12and Zhongxian Li1
Experimental study on the joint of a new type of composite structure system
Hongwei Ma, Weishan Jiang, Xinghu Zhang, Chun Yang and Qingjun Chen
The mechanism of an innovative WSGG anchor of FRP laminations
Jing Zhuo and Tangning Li
Design of thick pile cap with steel fiber reinforced concrete by space tie-arch analogy and truss analogy *
Qian Gu, Chengfang Sun, Shui Tian and Shaomin Peng
Summary of development and application study on new types of residential building structure systems *
Qianfeng Yao
Composite material application in plate-cone reticulated shell *
Xing Wang and Ting Lang
Mechanical properties of steel fiber reinforced lightweight aggregate concrete
Zhixing Zeng and Yanqiu Sun
Performance analysis of steel mega frame with sloping mega columns *
Lin Chen, Yaochun Zhang, Wenyuan Zhang and Yun Zhou
Influence analysis of rise-to-span ratio and sag ratio on the prestressed spatial truss string structure*
Xiuli Wang and Yongzhou Liu
The dynamic characteristic of the cable-truss supporting system of dot point glaze
Duixian Gao, Junzhi Zhang, Rui Zheng, Yongsheng Tang and Lianhua Wang
Stability bearing capacity analysis of cold-formed thin-walled arch corrugated steel roof*
Xuanneng Gao, Jian Wang and Haoming Zhu
Research of bond mechanical behaviors of steel reinforced structures*
Gentian Zhao, Yonghe Li and Bicheng Dong
Utility of steel fiber in concrete deep caps*
Hailin Lu ,Jiashi Qin and Chengfang Sun
SECTION 5MODERN TECHNIQUE AND METHOD ON STRUCTURAL EXPERIMENT
Experimental study on seismic behavior of connections for concrete-filled steel square tubular columns and steel-concrete composite beams*
Jianguo Nie, Kai Qin and Yan Xiao
Experimental and Numerical Study on Steel Frame with Composite Beams*
Jianguo Nie, Ge Chen and Chuanwei Sun
Experimental study of cable-based retrofit of steel building floors to prevent progressive collapse*
Xiaoxiong Zha, Samuel Tan and Yongzhi Xu
Biaxial compression in carbon fiber-reinforced mortar sensed by electrical resistance measurement*
Bo Wu, Xiaoji Huang and Jinzhong Lu
Environmental simulation test technology of modern concrete structures *
shengxing Wu and Yunfeng Li
Behaviour of concrete-filled square steel tubular columns with stiffeners under concentric compression
Zhong Tao, Zhibin Wang and Linhai Han
ExPeriments on hysteretic behaviors of welded steel beam-column connections in general and welded triangular haunch rehabilitation form*
Mingzhou Su, Qiang Gu, Baoan Xie and Na Lin
Contribution of steel fibers to seismic behavior of prestressed wide-beam frames*
Jianlan Zheng and Yaliang Chen
Experimental study and nonlinear analysis of abnormal exterior joints of reinforced concrete frame*
Guoliang Bai, Jianing Zhu, Hongxing Li and Shuyun Zhang
Experimental study on the bond strengths between steel shape and concrete in SRC structures*
Yong Yang, Jianyang Xue, Hongtie Zhao, Zixiong Guo and Yanhong Wang
An experimental research on the punch-bearing capacity of steel fiber reinforced concrete five-pile caps *
Chengfang Sun, Qian Gu and Shaomin Peng
Shaking table test of a 1/5scaled integrated masonry-in-frame system model
Jianping Gao and Mengcheng Chen
Experimental and analytical study on seismic bebavior of composite porous masonry structures*
Qingxuan Shi, Zhongming Xiong, Sheliang Wang and Hui Zhao
Experimental research and phantom analyses on strengthening compression columns by pre-stressi*
Xiaochun Fan
Experimental study of connections between concrete-filled steel tubes and reinforced concrete beams
Xiaolei Han, Jing Ji, Qingjun Chen and Fan Wang