申俊琦

申俊琦，男，天津大學材料工程與科學學院材料科學及加工自動化系副教授。

基本介紹

• 中文名：申俊琦
• 畢業院校：天津大學
• 學位/學歷：博士
• 職業：教師
• 專業方向：焊接新方法及工藝
• 職稱：副教授
• 任職院校：天津大學材料工程與科學學院

個人經歷

教育經歷：

2005.9–2010.6 天津大學，材料加工工程，工學博士

2001.9–2005.6 天津大學，材料成型及控制工程，工學學士

工作經歷：

2018.11- 天津大學，材料科學與工程學院，副教授

2017.11-2018.11 美國，密西根大學（University of Michigan），訪問學者

2010.10-2018.11 天津大學，材料科學與工程學院，講師

主講課程

《材料加工自動化》

研究方向

1.焊接新方法及工藝

2. 焊接自動化

3.焊接過程控制

4.新材料及異種材料焊接

社會兼職

中國機械工程學會焊接學會機器人與自動化專業委員會委員

中國機械工程學會焊接學會青年工作委員會委員承擔項目

承擔項目

• 盾構機構件機器人焊接系統研製 橫向項目 負責
• 鎂合金雷射-電弧複合焊接相關研究 軍工項目 負責
• 鋁合金雷射焊接相關研究 軍工項目 負責
• 射流管焊接相關研究 軍工項目 負責
• 異種鈦合金雷射焊接相關研究 軍工項目 負責
• 鋁合金TIG+CMT複合熱源焊接成形與控制基礎研究 國家自然科學基金項目 第一參與人
• 變極性CMT+P焊接電弧行為與成形控制研究 天津市自然科學及基金重點項目 第一參與人

學術成果

Tian Yinbao,Shen Junqi*, Hu Shengsun, Liang Ying, Bai Pengfei.Effects of ultrasonic peening treatment on surface quality of CMT-welds of Al alloys[J]. Journal of Materials Processing Technology, 2018, 254: 193-200.

Liang Ying,Shen Junqi*, Hu Shengsun, Wang Haichao, Pang Jie. Effect of TIG current on microstructural and mechanical properties of 6061-T6 aluminum alloy joints by TIG-CMT hybrid welding [J]. Journal of Materials Processing Technology, 2018, 255: 161-174.

Tian Yinbao,Shen Junqi*, Hu Shengsun, Wang Zhijiang, Gou Jian. Effects of ultrasonic vibration in the CMT process on welded joints of Al alloy [J]. Journal of Materials Processing Technology, 2018, 259: 282-291.

Liang Ying, Hu Shengsun,Shen Junqi*, Zhang Heng, Wang Peng. Geometrical and microstructural characteristics of the TIG-CMT hybrid welding in 6061 aluminum alloy cladding [J]. Journal of Materials Processing Technology, 2017, 239: 18-30.

Wang Hou, Hu Shengsun,Shen Junqi*, Li Dalong, Lu Jiansheng. Effect of duty cycle on microstructure and mechanical properties ofpulsed GTAW lap joint of Invar [J]. Journal of Materials Processing Technology, 2017, 243: 481-488.

Wang Peng, Hu Shengsun,Shen Junqi*,Liang Ying. Characterization the contribution and limitation of the characteristic processing parameters in cold metal transfer deposition of an Al alloy [J]. Journal of Materials Processing Technology, 2017, 245: 122-133.

Shen Junqi*, Li Bo, Hu Shengsun, Zhang Hao, Bu Xianzheng. Comparison of single-beam and dual-beam laser welding of Ti–22Al–25Nb/TA15 dissimilar titanium alloys [J]. Optics and Laser Technology, 2017, 93: 118-126.

Wang Peng, Hu Shengsun,Shen Junqi*, Liang Ying. Microstructure and mechanical behaviour of cold metal transfer welded Mg/Al dissimilar joint using wire AZ31 as filler metal [J]. Science and Technology of Welding and Joining, 2017, 22(4): 353-361.

Ding Lin, Hu Shengsun, Quan Xiumin,Shen Junqi*. Effect of aging treatment on microstructure and properties of VN alloy reinforced Co-based composite coatings by laser cladding [J]. Materials Characterization, 2017, 129: 80-87.

Wang Peng, Hu Shengsun,Shen Junqi*,Liang Ying, Pang Jie. Effects of electrode positive/negative ratio on microstructure and mechanical properties of Mg/Al dissimilar variable polarity cold metal transfer welded joints [J]. Materials Science & Engineering A, 2016, 652: 127-135.

Ding Lin, Hu Shengsun, Quan Xiumin,Shen Junqi*.Effect of VN alloy addition on the microstructure and wear resistance of Co-based alloy coatings [J]. Journal of Alloys and Compounds, 2016, 659: 8-14.

Ma Li, Hu Shengsun,Shen Junqi*, Han Jian. Effects of annealing temperature on microstructure, mechanical properties and corrosion resistance of 30% Cr super ferritic stainless steel [J]. Materials Letters, 2016, 184: 204-207.

Ma Li, Hu Shengsun,Shen Junqi*, Han Jian, Zhu Zhixiong. Effects of Cr content on the microstructure and properties of 26Cr–3.5Mo–2Ni and 29Cr–3.5Mo–2Ni super ferritic stainless steels [J]. Journal of Materials Science & Technology, 2016, 32: 552-560.

Li Dalong, Hu Shengsun,Shen Junqi*, Zhanghao, Bu Xianzheng. Microstructure and mechanical properties of laser-welded joints of Ti-22Al-25Nb/TA15 dissimilar titanium alloys [J]. Journal of Materials Engineering and Performance, 2016, 25: 1880-1888.

Wu Wenyong, Hu Shengsun,Shen Junqi*. Microstructure, mechanical properties and corrosion behavior of laser welded dissimilar joints between ferritic stainless steel [J]. Materials and Design, 2015, 65: 855-861.

Zhang Hao, Hu Shengsun, Shen Junqi*,Li Dalong, Bu Xianzheng. Effect of laser beam offset on microstructure and mechanical properties of pulsed laser welded BTi-6431S/TA15 dissimilar titanium alloys [J]. Optics & Laser Technology, 2015, 74: 158-166.

Li Yang, Hu Shengsun,Shen Junqi*,Liu Lala. Microstructures and mechanical properties of H62 brass-316L stainless steel in overlap welded joints by continuous-wave laser [J]. International Journal of Advanced Manufacturing Technology, 2015, 79: 627-634.

Hu Bao, Hu Shengsun,Shen Junqi*,Li Yang. Modeling of keyhole dynamics and analysis of energy absorption efficiency based on Fresnel law during deep-penetration laser spot welding [J]. Computational Materials Science, 2015, 97: 48-54.

Zuo Di, Hu Shengsun, Shen Junqi*,Xue Zhiqing. Intermediate layer characterization and fracture behavior of laser-welded copper/aluminum metal joints [J]. Materials and Design, 2014, 58: 357-362.

Li Yang, Hu Shengsun,Shen Junqi*,Hu Bao. Dissimilar welding of H62 brass-316L stainless steel using continuous-wave Nd: YAG laser [J]. Materials and Manufacturing Processes, 2014, 29: 916-921.

Chen Changliang, Hu Shengsun, He Donglin,Shen Junqi*. An approach to the path planning of tube-sphere intersection welds with the robot dedicated to J-groove joints [J]. Robotics and Computer-Integrated Manufacturing, 2013, 29: 41-48.

胡繩蓀，王明建，申俊琦*，陳昌亮，谷文，李堅. J形坡口焊接機器人運動控制系統設計[J].天津大學學報，2014, 47(4): 371-376.

庹宇鯤，胡繩蓀，申俊琦*，陳昌亮，谷文，李堅. 基於支持向量機的J型坡口接頭相貫線檢測[J].上海交通大學學報，2015, 49(3): 310-314

劉傑，胡繩蓀，申俊琦*，庹宇鯤，陳昌亮. 基於空間等距線的焊接機器人軌跡最佳化[J]. 焊接學報，2017,38(11):47-50, 81.