1.In-situ TEM Observation of Microstructure Evolution in 18Cr-ODS Steel Induced by Electron Beam Irradiation, Progress in Natural Sciences: Materials International(2012)。
2.The Effect of Crystal Orientation on the Behavior of Polycrystalline Tungsten Surface under Focused Ga+ Ion Bombardment, Nuclear Inst. and Methods in Physics Research, B(2012)。
3.In-situ Observation of Surface Morphology Evolution in Tungsten under Focused Ga+ Ion Irradiation，Journal of Nuclear Materials(2012)。
5.Investigation of erosion-corrosion of stainless Steel by Multiphase Jet Impingement，7th International Symposium on Multiphase Flow, Heat Mass Transfer and Energy Conversion（2012）。
6.Numerical investigation of nuclear waste deposition in turbulent duct flows，12th International Conference on Clean Energy (ICCE 2012)。
7.顆粒氣力輸送系統中靜電發生的機理研究，中國顆粒學會第八屆學術年會（2012）。
8.顆粒形體因素影響靜電發生的實驗研究: 三角形，梯形，中國顆粒學會第八屆學術年會（2012）。
9.Experimental investigations of granular shape effects on electrostatic charge generation, Particuology(2012)。
10.Mechanism of particle transport in a fully developed wake flow, Industrial & Engineering Chemistry Research(2012)。
11.Granular shape-volume effect on electrostatics –triangle, trapezium，5th Asian Particle Technology Symposium, Singapore（2012）。
12.Granular shape-volume effect on electrostatics –half circle, rectangle，5th Asian Particle Technology Symposium, Singapore（2012）。
13.Investigation of flow accelerate corrosion on secondary loop material in nuclear power stations，Symposium for Secondary Loop Pipe Management in Nuclear Power Stations, Shanghai（2011）。
14.Process tomographic measurements of granular flow in a pneumatic conveying system，The 9th International Conference Measurement and Control of Granular Materials, Shanghai（2011）。
15.Particle deposition in turbulent duct flows，2nd International Symposium on Materials and Reliability in Nuclear Power Plants, Shenyang（2011）。
16.粒狀腐蝕產物在管道中的沉積機理, 金屬學報(2011)。
17.Structural, electrical and magnetic measurements of oxide layers grown on 316L exposed on lead-bismuth, Journal of Nuclear Materials(2011)。
18.太陽能級晶體矽中雜質的質譜檢測方法, 質譜學報(2011)。
19.A Paradigm Shift Needed for Nuclear Reactors – from Economies of Unit Scale to Economies of Production Scale, Proceedings of the 2009 International Congress on Advanced Power Plants(2009)。
20.N. Li, “Lead-Alloy Coolant Technology and Materials – Technology Readiness Level Assessment”, in publication in Progress in Nuclear Energy (2008).。
21.N. Li, “Size Matters - installed maximal unit size predicts market life cycles of electricity generation technologies and systems”, submitted to Energy Policy for publication (2007).。
22.J. Zhang, N. Li, “Review of the studies on fundamental issues in LBE corrosion”, Journal of Nuclear Materials, 373 (2008) 351-377.
23.P. Hosemann, N. Li, et al. “Corrosion of ODS Steels in Lead-Bismuth Eutectic”, Journal of Nuclear Materials, accepted for publication (2007).
24.M. Machut, N. Li, et al. “Effects of Surface Roughness, Shot Peening, and Plasma-Assisted Elemental Surface Modification on Corrosion Resistance of Steels for use in Lead-Alloy Cooled Fast Reactors”, in Proceedings of the 2007 International Congress on Advances in Nuclear Power Plants, paper #7221, Nice, France, May 2007.
25.P. Hosemann, N. Li, et al. “Nano-indentation Measurement of Oxide Layers Formed in LBE on F/M Steels”, Journal of Nuclear Materials, accepted for publication (2007).
26.M. Machut, K. Sridharan, N. Li, and T. Allen, “Modeling of Corrosion Mechanisms of Steels for Lead-Alloy Cooled Reactors”, Journal of Nuclear Materials, accepted for publication (2007).
27.P. Hosemann, N. Li, et al. “Characterization of In-Lead Bismuth Eutectic Grown Oxide Layers on D9”, to be submitted to Journal of Nuclear Materials (2007).
28.J. Zhang and N. Li, “Modeling of Flow-Induced Corrosion with Nonuniform Boundary Conditions”, Corrosion Science, Vol. 63, No. 4, 330 (2007).
29.P. Hosemann, N. Li, et al. “A Nano-Scale Study of the Effects of Irradiation on Liquid Metal Corrosion and Mechanical Properties in Ferritic/Martensitic Steels”, to be submitted to Journal of Nuclear Materials (2007).
30.P. Hosemann, N. Li, et al. “Nano-Scale Characterization of HT-9 Exposed to Lead Bismuth Eutetic at 550oC for 3000h”, to be submitted to Journal of Nuclear Materials (2007).
31.P. Hosemann, N. Li, et al. “Effects of Laser Peening on Steels in LBE Corrosion”, to be submitted to Journal of Nuclear Materials (2007).
32.J. Zhang, N. Li, and Y. Chen, “Oxygen Control Technique in Molten Lead and Lead-Bismuth Eutectic Systems’, Nuclear Science and Engineering, Vol. 154, No. 2, 223 (2006).
33.N. Li, J. Zhang, B. Sencer, D. Koury, “Surface treatment and history-dependent corrosion in lead alloys”, Nuclear Instruments and Methods in Physics Research A 562 (2006) 695-697.
34.N. Li (co-author), “GNEP Small-Scale Reactor Technology Development Plan”, part of Technology Development Plan for the Global Nuclear Energy Partnership (GNEP) prepared for US-DOE (2006).
35.N. Li (contributor), “Global Nuclear Energy Partnership Technology Demonstration Plan”, prepared for US-DOE (2006).
36.N. Li, J. Zhang, H. Yu, “Model-Based Analysis of Corrosion Test Results and Extraction of Long-Term Corrosion Rate”, final report for Gen IV LFR (2006).
37.J. Zhang, N. Li, “Analysis of Liquid Metal Corrosion-Oxidation Interactions”, submitted to Corrosion Science (LA-UR-06-4116).
38.J. Zhang, N. Li, “Comparisons of the Oxide Layer Between Static Liquid Lead-Bismuth Eutectic and Gas Environments”, in Proceedings of 14th International Conference on Nuclear Engineering (ICONE14), Miami, US (2006).
39.F. Niu, R. Candalino, N. Li, “Effect of Oxygen on Fouling Behavior in Lead-Bismuth Coolant Systems”, Journal of Nuclear Materials, Vol. 366, Iss. 1-2, 216-222 (2007).
40.N. Li, “Steel Corrosion in Heavy Liquid Metals”, ANS Transactions, 2006.
41.J. Ma, N. Li, S. Ignatiev, and V. Kutanov, “Performance of Magnetic Hydro-Dynamic Pump in Lead-Bismuth Eutectic Target Circuit (TC-1), Transactions of Amer. Nuc. Soc., 2006.
42.P. Hosemann, F. Olivas, N. Li, “Corrosion Resistance of Ferritic/Martensitic ODS Alloys in LBE Environment and Application of MA956”, Transactions of Amer. Nuc. Soc., 2006.
43.J. Lim, R. Ballinger, P. Stahle, and N. Li, “Effects of Chromium and Silicon on Iron-Alloy Corrosion in Pb-Bi Eutectic”, Transactions of Amer. Nuc. Soc., 2006.
44.R. Ballinger, J. Lim, and N. Li, “The Development and Production of Functionally Graded Composite Cladding and Structural Materials for Lead-Bismuth Service”, Transactions of Amer. Nuc. Soc., 2006.
45.J. Lim, N. Li and R. Ballinger, “Materials Testing in Supercritical CO2”, Transactions of Amer. Nuc. Soc., 2006.
46.K. Miu, R. Ballinger, N. Li, J. Lim and D. Rigual, “The Development of Autocatalytic Structural Materials for Use in the Sulfur-Iodine Process for the Production of Hydrogen”, Transactions of Amer. Nuc. Soc., 2006.
47.P. Hejzlar, N. Li, J. Lim, “Chapter 7: Steel Corrosion in Carbon Dioxide”, MIT technical report (2006).
48.N. Li, T. Song, “Annual Report: Development and Test of Cladding Materials for Lead-Alloy Cooled Transmutation Reactors”, International Nuclear Energy Research Initiative Project #2004-005 between LANL and Korean Atomic Energy Research Institute/Seoul National University (2006).
49.N. Li (co-author), “Interim Status Report on the Small Secure Transportable Autonomous Reactor (SSTAR) Lead-Cooled Fast Reactor (LFR) and Related Research and Development”, technical report, ANL-GenIV-068 (2005).
51.N. Li (co-author), Interim Status Report on the Small Secure Transportable Autonomous Reactor (SSTAR)/Lead-Cooled Fast Reactor (LFR) and Related Research and Development, ANL-GenIV-068 (2005).
52.N. Li (co-author), Developing and Testing Fuel Cladding Materials for LBE Cooled Transmutation Reactors, DOE I-NERI annual report (2005).
53.M. Machut, K. Sridiharan, N. Li, T. Allen, “Corrosion Performance of Surface Modified Materials for Lead-Cooled Reactors”, ANS Transactions (2005).
54.F. Concetta, N. Li and B. Chan, Heavy Liquid Metal Materials Handbook Project, in Proceedings of Global2005, Tsukuba, Japan (2005).
55.N. Li, Lead-Alloy Coolant Technology and Materials – Current State of Art, in Proceedings of International Congress of Advanced Nuclear Power Plants, Seoul, Republic of Korea (2005).
