朱建文教授1980年畢業於台灣大學，獲理學學士學位；1983年在UC Berkeley（加州大學伯克利分校）獲得理學碩士學位；1986年在UC Berkeley獲得哲學博士學位；1986—1987年於UC Berkeley（加州大學伯克利分校）和Stanford（史丹福大學）做博士後；其後任職於美國Princeton（普林斯頓大學），並於90年代中任職UCLA土木與環境工程系終身教授至今。2015年6月22日朱建文受聘為西南交大名譽教授。
基本介紹
- 中文名：朱建文
- 國籍：中國
- 職業：博士生導師、西南交通大學名譽教授
- 畢業院校：台灣大學
- 性別：男
簡介,教育背景,職業經歷,研究領域,講授課程,獲獎與榮譽,學術成果,
簡介
朱建文 博士 UCLA（加州大學洛杉磯分校）土木與環境工程系終身教授 博士生導師
Jiann-Wen Woody Ju, Ph.D., P.E.
Department of Civil and Environmental Engineering,UniversityofCalifornia,Los Angeles
教育背景
o 1986~1987年，美國加州大學伯克利分校/美國史丹福大學，1987年8月博士後出站
o 1983~1986年，美國加州大學伯克利分校，結構力學專業，1986年12月獲哲學博士（Ph.D.）
o 1980~1983年，美國加州大學伯克利分校，結構工程專業，1983年6月獲理學碩士（M.S.）
o 1976~1980年，國立台灣大學，土木工程專業，1980年6月獲理學學士（B.S.）
o Post-Doctoral Fellow, (1986-87), University of California, Berkeley, and Stanford University
o Ph.D., (1986), University of California, Berkeley
o M.S., (1983), University of California, Berkeley
o B.S., (1980), National Taiwan University
職業經歷
2009年6月1998年，廣西大學土木建築工程學院，長江學者講座教授，博士生導師
主要研究領域（見下一節）
1998年7月至今，加州大學洛杉磯分校
1999年9月-2002年7月，土木與環境工程系，教授，系主任；
2001年7月至今，結構與力學研究組，組長，生物醫學工程研究組教授
主要研究領域（見下一節）：此外還研究：混凝土基礎的損傷與弱化，地質材料的損傷與修復模型，先進複合材料和纖維增強複合材料的微觀力學與納米力學，建造物缺陷，結構損傷評估，薄膜的微機電系統，人骨的生物力學，納米材料
1993年7月-1998年6月，加州大學洛杉磯分校
1994年7月-1998年6月，土木與環境工程系，副教授，副系主任；
1996年1月1998年9月，結構與力學研究組，組長
2015年6月22日，受聘於西南交通大學擔任名譽教授。
研究領域
o 微觀損傷力學：微裂隙或微孔洞弱化的脆性或韌性固體的微觀損傷力學；多相複合材料的界面微觀力學；微裂隙相互作用和演化；隨機分布的微裂隙或微孔洞的固體；複合材料力學性能的巨觀-微觀的相關性；基於微觀力學，微結構和斷裂力學的整體損傷模量和微裂隙動力學；拉壓載荷作用下二維和三維等效介質微觀力學方法和統計微觀力學方法；隨機分布的界面和晶粒面的微裂隙和它們對複合材料的影響；微觀力學實驗；統計微觀演化損傷模型的有效計算算法；統計微裂隙排列禁止和增強對巨觀裂紋尖端的影響；高溫作用下機場混凝土路面的熱-機械-化學本構模型和損傷模型；機場混凝土路面的傳熱，物質轉移和機械聯合作用下應力-應變場。
o 連續介質彈塑性損傷力學：脆性和韌性固體的連續介質彈塑性損傷力學；基於能量的彈-（粘）塑性損傷理論和計算算法；熱動力學；脆性和韌性損傷的物理特性；損傷準則和演化方程；彈-損傷和彈塑性-損傷的剪下模量；率相關損傷機理；微裂隙張開和閉合機理；各向同性和各向異性損傷模型；有限應變彈塑性損傷模型；有限元法框架內損傷演化模型的有效計算算法和因子辟裂法；結構損傷指標和評估。
o 含隨機分布異質體的多相複合材料微觀力學：纖維脆性或金屬基複合材料；陶瓷和陶瓷複合材料；機率微結構和微幾何；掃描電鏡微觀實驗；纖維拉拔問題的彈性應力場；複合材料計算微觀模型的數值算法。
o 塑性和粘塑性理論和計算算法：非光滑多面的塑性和粘塑性力學；因子辟裂和回歸影射算法；塑性和粘塑性的剪下模量。塑性和粘塑性的聯合計算。
o 非線性計算固體力學：非線性彈塑性和有限變形的摩擦接觸問題；工程材料和結構的本構模型和有限元計算；非線性方程解決策略；應變軟化，材料穩定，適定性和唯一性問題；大規模計算；結構動力學和有限元分析。
o 無損檢測，有損檢測，化學引起的混凝土損傷模型：混凝土基礎損傷和結構物缺陷；水/水泥比例模型，膠體空隙和毛細空隙，化學和機械聯合作用下滲透和損傷（微裂隙），彈性和拉伸強度折減，損傷機理，服務期限預測；低頻超音波無損檢測，混凝土結構試驗。
講授課程
o Course for Ph.D. & MS of Guangxi University: Damage Mechanics in Engineering Materials
o C&EE 137: Elementary Structural Dynamics
o C&EE 130L: Experimental Structural Mechanics
o C&EE M230C: Plasticity
o M&AE M256C: Plasticity
o C&EE 249: Selected Topics in Structural Engineering and Mechanics
o C&EE 296: Advanced Topics in Civil Engineering
o C&EE M237A: Dynamics of Structures (Online MS)
o M&AE M269A: Dynamics of Structures (Online MS)
獲獎與榮譽
o IACM Fellow Award, the International Association of Computational Mechanics, Feb. 2010.
o Election as Ordinary Member of General Council of the Intl Association of Computational Mechanics, July 2009.
o Chang-Jiang Scholar Chair Professor, 2009-present, Ministry of Education, China. Kwang-Hua Chair Professor, 2010-present, Tongji University.
o ACI Fellow Election, the American Concrete Institute, Nov. 2008.
o Invited Chair Professor, LMT Cachan, ENS Cachan/CNRS, University of Paris VI, France, AY 2008-2009.
o Invited Visiting Professor, City University of Hong Kong, November to December 2009, under the Academic Exchange Fund of the City University of Hong Kong.
o 2008 Publication Award of Merit, the the Structural Engineers Association of Illinois, June 2008.
o Editorial Board, Acta Mechanica (An Intl. Journal), March 2008-present, Springer-Verlag GmbH.
o Editorial Board, Journal of Chongqing University (English Edition), April 2008-present.
o Editorial Board, Book Series in Computational and Experimental Methods in Structures, June 2008-present, Imperial College Press & World Scientific Publishing Co., USA, UK and Singapore
o Engineering Panel, Research Grant Council of Hong Kong, Sep. 2008- June 2010.
o USACM Fellow Award, the U.S. Association for Computational Mechanics, 2007.
o Distinguished Visiting Professor, the Chinese Academy of Sciences, Institute of Mechanics, July-August 2007.
o Election as General Council Member and Executive Council Member, the International Chinese Association for Computational Mechanics, July 2007-2015.
o Principal Co-Chair of ASME Award Endowments for the “Thomas J.R. Hughes AMD Young Investigator Award” and the “Theodore Belytschko Applied Mechanics Award”, the American Society of Mechanical Engineers, 2006-2007.
o ASCE Fellow Election, The American Society of Civil Engineers, 2006.
o Election as Member-at-Large and Executive Committee Member, the U.S. Association for Computational Mechanics, Dec. 2006.
o Editor, the International Journal of Damage Mechanics, Sage Publications, London, Sep. 2006-present.
o ACI-James Instruments Award for Research Paper in Non-destructive Testing, American Concrete Institute, 2000.
o ASME Fellow Election, The American Society of Mechanical Engineers, Feb. 1998.
o Walter L. Huber Civil Engineering Research Prize, The American Society of Civil Engineers, 1997.
o Associate Editor, The Journal of Applied Mechanics, ASME, 1995-2002.
o Associate Editor, The Journal of Engineering Materials and Technology, ASME, 1995-2001.
o Presidential Young Investigator Award (1991-98), National Science Foundation and White House, 1991.
o Alfred Rheinstein Faculty Award, Princeton University, 1991.
o Plenary/Keynote Speaker, the 2nd International Symposium on Computational Mechanics, and the 12th International Conference on the Enhancement and Promotion of Computational Methods in Engineering and Science, Hong Kong and Macau, November 30, 2009.
o Keynote Speaker, Symposium on Multiscale Damage and Failure Mechanics of Engineering Materials, 10th U.S. National Congress on Computational Mechanics, Greater Columbus Convention Center, Columbus, Ohio, July 18, 2009.
o Keynote Speaker, Symposium on Multiscale Damage and Failure Mechanics of Engineering Materials, 8th World Congress on Computational Mechanics, Venice Lido Convention Center, Lido, Venice, Italy, July 3, 2008.
o Semi-Plenary Speaker, International Symposium on Computational Mechanics, Beijing, China, July 30, 2007.
o Keynote Speaker, Symposium on Multiscale Damage and Failure Mechanics, 9th U.S. National Congress on Computational Mechanics, Hyatt Regency San Francisco, July 25, 2007.
o Citation in Who's Who in the World, by Marquis Who's Who.
o Citation in Who's Who in America, by Marquis Who's Who.
o Citation in Who's Who in Science and Engineering, by Marquis Who's Who.
o Citation in Who's Who in American Education, by Marquis Who's Who.
o Citation in Who's Who in the West, by Marquis Who's Who.
o Citation in Who's Who in Finance and Business, by Marquis Who's Who.
o Chairman of American Concrete Institute Committee 446 on “Fracture Mechanics” (2004-2008)
學術成果
1. Ragavendra, N., Ju, J.W., Klug, W., Salamanca, A., Grubweiser, S., and Kasper, H., “In Vivo Fracture Mechanics Method of Measuring the Toughness of Human Solid Cancers”, Invention Report, UCLA Intellectual Property, 5 pages; UCLA OIP Case No. 2008-606, March 14, 2008.
2. Ragavendra, N., Ju, J.W., Klug, W., Salamanca, A., Grubweiser, S., and Kasper, H., “Method and Apparatus for Measuring the Toughness of Solid Cancers”, U.S. Provisional Patent Application, Serial no. 61/100,602; UCLA OIP Case No. 2008-606-1, September 26, 2008.
3. Kao, W.H., Carlson, L., Yang, J.-M., and Ju, J.W., “Pothole Repair for Asphalt and Concrete Base Aggregates”, Invention Report, UCLA Intellectual Property, 10 pages; UCLA OIP Case No. 2009-731, June 3, 2009.
1. Simo, J.C., and Ju, J.W., “Strain and stress based continuum damage models, Part I: Formulation”, Int. J. Solids & Struct., Vol. 23, No. 7, pp. 821—840, 1987.
2. Simo, J.C., and Ju, J.W., “Strain and stress based continuum damage models, Part II: Computational Aspects”, Int. J. Solids & Struct., Vol. 23, No. 7, pp. 841—869, 1987.
3. Simo, J.C., Ju, J.W., Pister, K.S., and Taylor, R.L., “An assessment of the cap model: consistent return algorithms and rate-dependent extension”, J. of Eng. Mech., ASCE, Vol. 114, No. 2, pp. 191—218, Feb. 1988.
4. Ju, J.W., and Taylor, R.L., “A perturbed Lagrangian formulation for the finite element solution of nonlinear frictional contact problems”, Journal de Mecanique Theorique et Appliquee, Special Issue, Supplement No. 1 to Vol. 7, pp. 1—14, 1988.
5. Ju, J.W., Monteiro, P.J.M., and Rashed, A.I., “On continuum damage of cement paste and mortar as affected by porosity and sand concentration”, J. of Eng. Mech., ASCE, Vol. 115, No. 1, pp. 105—130, Jan. 1989.
6. Simo, J.C., and Ju, J.W., “On continuum damage-elastoplasticity at finite strains: A computational framework”, Computational Mechanics, Vol. 5, No. 5, pp. 375—400, 1989.
7. Ju, J.W., “On energy-based coupled elastoplastic damage theories: Constitutive modeling and computational aspects”, Int. J. Solids & Struct., Vol. 25, No. 7, pp. 803—833, 1989.
8. Ju, J.W., “On energy-based coupled elastoplastic damage models at finite strains”, J. of Eng. Mech., ASCE, Vol. 115, No. 11, pp. 2507—2525, 1989.
9. Simo, J.C., Ju, J.W., and Taylor, R.L., “Softening response, completeness condition and numerical algorithms for the cap models”, Int. J. for Numer. Meth. in Eng., accepted for publication (49 pages).
10. DiPasquale, E., Ju, J.W., Askar, A., and Cakmak, A.S., “On the relation between global damage indices and local stiffness degradation”, J. of Struct. Eng., ASCE, Vol. 116, No. 5, pp. 1440—1456, May 1990.
11. Ju, J.W., “Consistent tangent moduli for a new class of viscoplasticity”, J. of Eng. Mech., ASCE, Vol. 116, No. 8, pp. 1764—1779, August 1990.
12. Ju, J.W., “Isotropic and anisotropic damage variables in continuum damage mechanics”, J. of Eng. Mech., ASCE, Vol. 116, No. 12, pp. 2764—2770, Dec. 1990.
13. Ju, J.W., “On Two-dimensional self-consistent micromechanical damage models for brittle solids”, Int. J. Solids & Struct., Vol. 27, No. 2, pp. 227—258, 1991.
14. Ju, J.W., “A micromechanical damage model for uniaxially reinforced composites weakened by interfacial arc microcracks”, J. of Appl. Mech., ASME, Vol. 58, No. 4, pp. 923—930, Dec. 1991.
15. Ju, J.W., and Lee, X., “Micromechanical damage models for brittle solids. Part I: tensile loadings”, J. of Eng. Mech., ASCE, Vol. 117, No. 7, pp. 1495—1515, July 1991.
16. Lee, X., and Ju, J.W., “Micromechanical damage models for brittle solids. Part II: Compressive loadings”, J. of Eng. Mech., ASCE, Vol. 117, No. 7, pp. 1516—1537, July 1991.
17. Ju, J.W. and Tseng, K.H., “A three-dimensional statistical micromechanical theory for brittle solids with interacting microcracks”, Int. J. of Damage Mechanics, Vol. 1, No. 1, pp. 102—131, Jan. 1992.
18. Ju, J.W., and Chen, T.M., “Effective elastic moduli of two-dimensional brittle solids with interacting microcracks. Part I: basic formulations”, J. of Appl. Mech., ASME, Vol. 61, pp. 349—357, June 1994.
19. Ju, J.W., and Chen, T.M., “Effective elastic moduli of two-dimensional brittle solids with interacting microcracks. Part II: evolutionary damage models”, J. of Appl. Mech., ASME, Vol. 61, pp. 358—366, June 1994.
20. Ju, J.W., and Chen, T.M., “Micromechanics and effective moduli of elastic composites containing randomly dispersed ellipsoidal inhomogeneities”, Acta Mechanica, Vol. 103, pp. 103—121, 1994.
21. Ju, J.W., and Chen, T.M., “Effective elastic moduli of two-phase composites containing randomly dispersed spherical inhomogeneities”, Acta Mechanica, Vol. 103, pp. 123—144, 1994.
22. Ju, J.W., and Chen, T.M., “Micromechanics and effective elastoplastic behavior of two-phase metal matrix composites”, J. of Eng. Mater. & Technology, ASME, Vol. 116, pp. 310—318, July 1994.
23. Ju, J.W., and Tseng, K.H., “An improved two-dimensional micromechanical theory for brittle solids with many randomly located interacting microcracks”, Int. J. of Damage Mechanics, Vol. 4, No. 1, pp. 23—57, Jan. 1995.
24. Ju, J.W., “On micromechanical evolutionary damage models for polycrystalline ceramics”, Int. J. of Damage Mechanics, Vol. 5, No. 2, pp. 113—137, April 1996.
25. Ju, J.W., Comments and author's reply on “Micromechanics and effective moduli of elastic composites containing randomly dispersed ellipsoidal inhomogeneities”, Acta Mechanica, Vol. 114, pp. 235—239, 1996. (Discussion)
26. Ju, J.W., and Tseng, K.H., “Effective elastoplastic behavior of two-phase ductile matrix composites: A micromechanical framework”, Int. J. Solids & Struct., Vol. 33, No. 29, pp. 4267—4291, Dec. 1996.
27. Ju, J.W., and Tseng, K.H., “Effective elastoplastic algorithms for two-phase ductile matrix composites”, J. of Eng. Mech., ASCE, Vol. 123, No. 3, pp. 260—266, March 1997.
28. Ju, J.W., “Rate dependent damage model for concrete in dynamics”, J. of Eng. Mech., ASCE, Vol. 123, No. 12, pp. 1326—1327, Dec. 1997. (Discussion)
29. Ju, J.W., and Zhang, Y., “A thermomechanical model for airfield concrete pavement under transient high temperature loadings”, Int. J. of Damage Mechanics, Vol. 7, No. 1, pp. 24—46, January 1998.
30. Ju, J.W., and Zhang, X.D., “Micromechanics and effective transverse elastic moduli of composites with randomly located aligned circular fibers”, Int. J. Solids & Struct., Vol. 35, No. 9-10, pp. 941—960, 1998.
31. Ju, J.W., and Zhang, Y., “Axisymmetric thermomechanical constitutive and damage modeling for airfield concrete pavement under transient high temperatures”, Mechanics of Materials, Vol. 29, pp. 307—323, 1998.
32. Ju, J.W., and Sun, L.Z., “A novel formulation for the exterior-point Eshelby's tensor of an ellipsoidal inclusion”, J. of Appl. Mech., ASME, Vol. 66, pp. 570—574, June 1999.
33. Ju, J.W., and Lee, H.K., “A micromechanical damage model for effective elastoplastic behavior of ductile matrix composites considering evolutionary complete particle debonding”, Computer Meth. in Appl. Mech. and Eng., Vol. 183, No. 3—4, pp. 201—222, March 2000.
34. Ju, J.W., and Sun, L.Z., “Effective elastoplastic behavior of metal matrix composites containing randomly located aligned spheroidal inhomogeneities. Part I: micromechanics-based formulation”, Int. J. Solids & Struct., Vol. 38, No. 2, pp. 183—201, 2001.
35. Sun, L.Z., and Ju, J.W., “Effective elastoplastic behavior of metal matrix composites containing randomly located aligned spheroidal inhomogeneities. Part II: applications”, Int. J. Solids & Struct., Vol. 38, No. 2, pp. 203—225, 2001.
36. Ju, J.W., and Zhang, X.D., “Effective elastoplastic behavior of ductile matrix composites containing randomly located aligned circular fibers”, Int. J. Solids & Struct., Vol. 38, No. 22—23, pp. 4045—4069, 2001.
37. Stewart, J.P., Chu, D.B., Seed, R.B., Ju, J.W., and Perkins, W.J., et al., “Soil liquefaction from the Chi-Chi, Taiwan, Earthquake of September 21, 1999”, Earthquake Spectra, EERI, Supplement A to Volume 17, pp. 37—60, April 2001.
38. Ju, J.W., and Lee, H.K., “A micromechanical damage model for effective elastoplastic behavior of partially debonded ductile matrix composites”, Int. J. Solids & Struct., Vol. 38, No. 36—37, pp. 6307—6332, 2001.
39. Hossain, N., Ju, J.W., Warneke, B., and Pister, K.S.J., “Characterization of the Young’s modulus of CMOS thin films”, in Mechanical Properties of Structural Films, ASTM STP 1413 (ISBN 0-8031-2889-4), Ed. by C. Muhlstein and S. Brown, pp. 139—151, Nov. 2001 (peer-reviewed).
40. Sun, L.Z., Ju, J.W., and Liu, H.T., “Elastoplastic modeling of metal matrix composites with evolutionary particle debonding”, Mechanics of Materials, Vol. 35, pp. 559—569, 2003 (published in 2002).
41. Sun, L.Z., Liu, H.T., and Ju, J.W., “Effect of particle cracking on elastoplastic behavior of metal matrix composites”, Int. J. for Numer. Meth. in Eng., Vol. 56, pp. 2183—2198, 2003.
42. Liu, H.T., Sun, L.Z., and Ju, J.W., “An interfacial debonding model for particle-reinforced composites”, Int. J. of Damage Mechanics, Vol. 13, No. 2, pp. 163-185, 2004.
43. Sun, L.Z., and Ju, J.W., “Elastoplastic modeling of metal matrix composites containing randomly located and oriented spheroidal particles”, J. of Appl. Mech., ASME, Vol. 71, pp. 774-785, Nov. 2004.
