方國東，男，漢族，1983年生。博士，哈爾濱工業大學航天學院複合材料與結構研究所教授，博士生導師。
基本介紹
- 中文名：方國東
- 民族：漢
- 畢業院校：哈爾濱工業大學
- 學位/學歷：博士
- 職業：教師
- 專業方向：工程力學專業
- 任職院校：哈爾濱工業大學
個人經歷,主講課程,研究方向,學術成果,
個人經歷
教育經歷
2001年-2005年, 就讀於哈爾濱工業大學, 工程力學專業, 本科
2005年-2010年, 就讀於哈爾濱工業大學, 工程力學專業, 碩博連讀，博士
工作經歷
2012.07-2017.12 哈爾濱工業大學航天學院，講師
2013.01至今 哈爾濱工業大學，碩士生導師
2018.01至今 哈爾濱工業大學航天學院，副教授
2019.05至今 哈爾濱工業大學，博士生導師
主講課程
本科生課程：
複合材料結構設計，選修課，每年24學時
研究生課程：
1. 有限元及工程軟體，學位核心課，每學年48學時
2. 複合材料力學，研究生選修課，32學時，2017年秋、2018年秋
研究方向
紡織複合材料力學性能分析及評價
複合材料損傷及失效
材料高溫力學性能
計算力學
學術成果
研究課題
國家自然科學基金，低密度碳酚醛複合材料微觀燒蝕建模及回響預示研究，2017.1-2020.12，負責，進行中
黑龍江省科學基金，三維編織複合材料結構快速建模及微細觀損傷失效機理研究，2017.10-2020.10，負責，進行中
國家自然科學基金，三維編織複合材料力學行為及疲勞積累損傷研究,2012.01-2014.12,負責，完成
黑龍江省博士後科研啟動金資助，針刺C/C複合材料宏細觀本構關係研究，2013.01-2014.12，負責，完成
論文期刊
2020年度
Liu S, Fang GD*, Liang J, Fu MQ, Wang B. A new type of peridynamics: element-based peridynamics. Computer Methods in Applied Mechanics and Engineering. 2020-4-25
Liu S, Fang GD*, Liang J*, Lv DK. A coupling model of XFEM/peridynamics for 2D dynamic crack propagation and branching problems. Theoretical and Applied Fracture Mechanics,2020-3-12,
Qi YC, Fang GD*, Wang ZW, Liang J*, Meng SH. An improved analytical method for calculating stiffness of 3D needled composites with different needle-punched processes. Composite Structures, 2020. 237: 111938
王章文,張軍,方國東*,孟松鶴.界面層對纖維增韌陶瓷基複合材料力學性能影響的研究進展[J].裝備環境工程,2020,17(01):77-89.
張軍,許陽陽,張運法,洪長青,方國東*.石英燈輻射加熱條件下低密度碳/酚醛複合材料高溫回響及分析[J].裝備環境工程,2020,17(01):51-57.
Wang B, Fang GD*, Liu S, Liang J*, Lv DK. Smoothing interface stress oscillation of composite materials in FFT method by laminate theory. Mechanics of Advanced Materials and Structures. 2020-1-6. doi: 10.1080/15376494.2020.1712749.
2019年度
Che L, Fang GD*，Wu ZW, Ma YF, Zhang JZ, Zhou, ZG. Investigation of curing deformation behavior of curved fiber metal laminates.Composite Structures, 2019-10,
Ji QX, ChenXY, Liang J, Laude V, Guenneau S, Fang GD*, Kadic M, Non-singular homogeneous polyhedral heat cloak and its realization. ES Energy & Environment., 2019, 7, 29-39. DOI: 10.30919/esee8c361
Che L, Zhang JZ, Ma Yunfei, Fang GD*, Zhou ZG, Dong WZ. Warping deformation analysis of angle-ply fiber metal laminates with slippage during manufacturing. Thin-Walled Structures, 2019-8-28. 2019,145:106378.
Wei Li, Guodong Fang*, Weijie Li, Jun Liang, Maoyuan Li. Role of mesoscopic features on thermochemical ablative behavior of 3D C/C braided composites. International Journal of Heat and Mass Transfer, 2019-08-19, 2019,144:118602
戚雲超，方國東*，梁軍*，謝軍波. 三維針刺C/SiC複合材料針刺預製體工藝參數最佳化. 材料工程,2020,48(01):27-33，2019-07.
王章文，方國東*，白光輝，霍艷艷，易法軍. 寬溫域無氧環境下熱電器件性能實驗及仿真. 電子元件與材料, 2019-07
Fang GD, Wang B, Liang J. A coupled FE-FFT multiscale method for progressive damage analysis of 3D braided composite beam under bending load. Composites Science and Technology, 2019-6-18,
Zhao Y, Alderliesten R, Wu ZW, Zhou ZG, Fang GD*, Zhang JZ, Benedictus R. Determining finite-width-correction factors for fatigue crack growth prediction in GLARE using the equivalent compliance method. International Journal of Fatigue, 2019,127:74-81. 1-JUN-2019, doi: 10.1016/j.ijfatigue.2019.05.037
劉碩, 方國東*, 付茂青, 王兵, 梁軍*. 近場動力學與有限元方法耦合求解複合材料損傷問題, 中國科學: 技術科學, 2019-4-9
Wang B, Fang GD*, Liu S, Liang J*. Effect of heterogeneous interphase on the mechanical properties of unidirectional fiber composites studied by FFT-based method. Composite Structures, 2019-4-9, DOI: 10.1016/j.compstruct.2019.04.049.
Wu ZW, Zhao Y, Liang J*, Fu MQ, Fang GD*. A Frequency Domain Approach in Residual Stiffness Estimation of Composite Thin-wall Structures under Random Fatigue Loadings. International Journal of Fatigue, 2019.3,
Li W, Zhang J, Fang GD*, Li WJ, Liang J*, Meng SH, Evaluation of numerical ablation model for charring composites. SCIENCE CHINA Technological Sciences, 2019.3,
李偉,方國東*,李瑋潔,王兵,梁軍*. 碳纖維增強複合材料微觀燒蝕行為數值模擬. 力學學報, 2019-1-16.
Fang GD, Liu S*, Fu MQ, Wang B, Wu ZW, Liang J*. A method to couple state-based peridynamics and finite element method for crack propagation problem. Mechanics Research Communications, 2019,95: 89-95.
Wu ZW, Fang GD*, Fu MQ, Chen XJ, Liang J*, Lv DK. Random fatigue damage accumulation analysis of composite thin-wall structures based on residual stiffness method. Composite Structures, 3-JAN-2019, DOI: 10.1016/j.compstruct.2019.01.018.
2018年度
Ji, Qingxiang; Fang, Guodong; Liang, Jun. Achieving thermal magnification by using effective thermal conductivity. THEORETICAL AND APPLIED MECHANICS LETTERS. 2018, 8(3):164-170
Q Ji, J Zhang, G Fang*, G Bai, J Liang*. Design of a diamond-shaped thermal concentrator with homogeneous materials. AIP Advances, 8, 095120 (2018);
Zhao Y, Alderliesten R, Zhou ZG, Fang GD*, Zhang JZ, Benedictus R. On the physics of applying finite width and geometry correction factors in fatigue crack growth predictions of GLARE. International Journal of Fatigue, 2018, 117:189-195.
Wu ZW, Liang J*, Fu MQ, Zhou ZG, Fang GD*. Study of random fatigue behavior of C/SiC composite thin-wall plates. International Journal of Fatigue, 2018,116:553-561.
Xie JB, Chen XM, Zhang YF, Fang GD, Chen L*.Experimental and numerical investigation of the needling process for quartz fibers. Composites Science and Technology, 2018, 165:115–123.
Ji QX, Fang GD, Liang J*. Achieving thermal concentration based on fiber reinforced composite microstructures design. Journal of Physics D: Applied Physics, 2018
Fang GD*, Chen CH, Meng SH, Liang J. Mechanical analysis of 3D braided composites by using realistic voxel-based model with local mesh refinement. Journal of Composite Material, 2018,
Wang S, Zhang J, Fang G*, Zhou ZG, Wang Y. Compressive and flexural behavior of carbon fiber reinforced PPS composites at elevated temperature. Mechanics of Advanced Materials and Structures, 2018, DOI:10.1080/15376494.2018.1472334.
Ji QX, Fang GD, Liang J. Designs for thermal harvesting with nonlinear coordinate transformation. AIP Advances 8, 045316 (2018);
Che L, Zhou Z, Fang G*,Ma Y, Dong W, Zhang J. Cured shape prediction of fiber metal laminates considering interfacial interaction. Composite Structures, 2018,194(15):564-574.
劉碩，方國東*，王兵，付茂青，梁軍*. 近場動力學與有限元方法耦合求解熱傳導問題. 力學學報，2018,50(2):339-348.
Xie J, Fang G*,Chen Z, Liang J*,Numerical and experimental studies on scattered mechanical properties for 3D needled C/C-SiC composites. Composite Structures, 2018,192(15):545-554.
Chen Z, Fang* G, Xie J, Liang J. Mechanisms-based strength criterion for 3D needled C/C-SiC composites under in-plane biaxial compression. Mechanics of Advanced Materials and Structures , 2018, DOI:10.1080/15376494.2018.1452316.
Wang B, Fang GD*, , Liu S, Fu MQ, Liang J. Progressive damage analysis of 3D braided composites using FFT-based method. Composite Structures, 2018,
Wang SY, Zhang JZ, Fang GD*, Zhou ZG, Wang Y. Mathematical Description of Mechanical Behavior of Woven Fabric Reinforced PPS-Based Composites at High Temperature. Polymer Composites, 2018, DOI 10.1002/pc.24807
Fang GD*, Yuan SG, Meng SH, Liang J. Graded negative Poisson@#%s ratio honeycomb structure design and application. Journal of Sandwich Structures and Materials, 2018，DOI: 10.1177/1099636218755555.
Wang Y, Zhang JP, Fang GD*, Zhang JZ, Zhou ZG, Wang SY, Influence of Temperature on the Impact Behavior of Woven-Ply Carbon Fiber Reinforced Thermoplastic Composites, Composite Structures, 2018,185:435-45.
Zhang JP, Wang Y, Zhang JZ, Zhou ZG, Fang GD*, Zhao Y, Zu SM. Characterizing the Off-Axis Dependence of Failure Mechanism in Notched Fiber Metal Laminates, Composite Structures, 2018,185:148-60.
2017年度
Fang G*, Chen C, Yuan S, Meng S, Liang J. Micro-tomography based Geometry Modeling of Three-Dimensional Braided Composites. Appl Compos Mater. 2018,25(3):469-483. Fullpaper
Wang Y, Zhang J, Zhang J, Zhou Z, Fang G*, Wang S. Compressive behavior of notched and unnotched carbon woven-ply PPS thermoplastic laminates at different temperatures. Composites Part B: Engineering. 2018;133:68-77. Fullpaper
Zhang J, Wang Y, Fang G*, Zhao Y, Zhang J, Zhou Z. Application of energy dissipation approach for notched behavior in fiber metal laminates. Composite Structures. 2017;180:809-20. Fullpaper
Xie J, Fang G*, Chen Z, Liang J. An anisotropic elastoplastic damage constitutive model for 3D needled C/C-SiC composites. Composite Structures. 2017;176:164-77.
Xie J, Fang G*, Chen Z, Liang J. High-temperature constitutive model for three-dimensional needled C/C-SiC composite under tensile loading. Journal of Composite Materials. 2017;51(18):2619-29.
Wang S, Zhou Z, Zhang J, Fang G*, Wang Y. Effect of temperature on bending behavior of woven fabric-reinforced PPS-based composites. Journal of Materials Science. 2017;52(24):13966-76.
Wang L, Kong D, Fang G, Liang J. High-temperature tensile strength and fracture behavior of ZrB2-SiC-graphite composite. Int J Appl Ceram Technol. 2017;14(1):31-8.
2016年度
Fang G, El Said B, Ivanov D, Hallett SR. Smoothing artificial stress concentrations in voxel-based models of textile composites. Composites Part A: Applied Science and Manufacturing. 2016;80:270-84. Fullpaper
Xie J, Fang G*, Chen Z, Liang J. Modeling of Nonlinear Mechanical Behavior for 3D Needled C/C-SiC Composites Under Tensile Load. Appl Compos Mater. 2016;23(4):783-97. Fullpaper
謝軍波,方國東,陳振,梁軍. 針刺C/C-SiC複合材料剪下非線性本構關係[J]. 複合材料學報,2016,33(07):1507-1514.全文
Shi S, Li L, Fang G, Liang J, Yi F, Lin G. Three-dimensional modeling and experimental validation of thermomechanical response of FRP composites exposed to one-sided heat flux. Materials and Design. 2016;99:565-73.
Shi S, Gu L, Liang J, Fang G, Gong C, Dai C. A mesomechanical model for predicting the degradation in stiffness of FRP composites subjected to combined thermal and mechanical loading. Materials and Design. 2016;89:1079-85.
Shi S, Gong C, Liang J, Fang G, Wen L, Gu L. Ablation mechanism and properties of silica fiber-reinforced composite upon oxyacetylene torch exposure. Journal of Composite Materials. 2016;50(27):3853-62.
Chen Z, Fang G*, Xie J, Liang J. Experimental study of high-temperature tensile mechanical properties of 3D needled C/C-SiC composites. Materials Science and Engineering A. 2016;654:271-7.
2015年度
Xie J, Liang J, Fang G*, Chen Z. Effect of needling parameters on the effective properties of 3D needled C/C-SiC composites. Composites Science and Technology. 2015;117:69-77. Fullpaper
Wang LL, Liang J, Fang GD*.High temperature fracture behavior of ZrB2–SiC–graphite composite in vacuum and air. Journal of Alloys and Compounds, 2015, 619: 145-150.
Wang L, Liang J, Fang G*. Dynamic compressive behavior of ZrB2-based ceramic composites at room temperature and 1073 K. Int J Appl Ceram Technol. 2015;12(6):1210-6.
劉寶瑞，方國東*，梁軍. 基於Voxel有限元格線對球形夾雜複合材料的應力分析. 複合材料學報， 2015, 32（6）:1769-1776. 全文
王玲玲,方國東,梁軍. ZrB_2基超高溫陶瓷複合材料的高溫拉伸損傷行為[J]. 複合材料學報,2015,32(01):125-130.
李林傑, 方國東*, 易法軍, 梁軍. 高矽氧/酚醛複合材料熱變形實驗測試及表面燒蝕形貌分析. 固體火箭技術. 2015(03):445-50.全文
陳振, 方國東, 謝軍波, 梁軍. 三維軸編C/C複合材料雙向拉伸實驗研究. 固體火箭技術. 2015(02):267-72.
2014年度
王玲玲, 方國東, 梁 軍. ZrB2基超高溫陶瓷複合材料的高溫拉伸損傷行為. 複合材料學報，2014
陳海龍，方國東*，李林傑，梁軍，時聖波. 高矽氧/酚醛複合材料熱-力-化學多物理場耦合計算, 複合材料學報，2014，31:533-540. 全文
Wang LL, Fang GD*, Liang J, Wang C. Formation mechanism and high temperature mechanical property characterization of SiC depletion layer in ZrB2/SiC ceramics. Materials Characterization. 2014, 95:245-251. Fullpaper
Wang LL, Liang J, Fang GD, Wan X-Y, Xie JB. Effects of strain rate and temperature on compressive strength and fragment size of ZrB2-SiC-graphite composites. Ceram Int. 2014;40(4):5255-5261.
2013年度
Shi S-B, Liang J, Liu Z-G, Ding X-H, Fang G-D. Endothermic mechanism of silica/phenolic composite under ablative environment. Guti Huojian Jishu/Journal of Solid Rocket Technology. 2013;36(1):113-118. 全文連結
Shi S, Liang J, Yi F, Fang G. Modeling of one-dimensional thermal response of silica-phenolic composites with volume ablation. Journal of Composite Materials. 2013;47(18):2219-2235.
Shi S, Liang J, Lin G, Fang G. High temperature thermomechanical behavior of silica-phenolic composite exposed to heat flux environments. Composites Science and Technology. 2013;87:204-209.
2012年度
Wang B, Fang G*, Liang J, Wang Z. Failure locus of 3D four-directional braided composites under biaxial loading. Appl Compos Mater. 2012;19(3-4):529-544. Fullpaper
Liang J, Wang Y, Fang G, Wang G. Influence of oxidation healing for cracks on the strength of hot-pressed ZrB2-SiC-AlN ceramics. Int J Appl Ceram Technol. 2012;9(2):441-446.
Fang G-D*, Han J-C, Liang J, Meng S-H, Yang Y. Effective behavior of constituent materials of in-plane braided C/C composites. Guti Huojian Jishu/Journal of Solid Rocket Technology. 2012;35(5):644-649. 全文
2011年度
Shi S-B, Liang J, Fang G-D. Effect of thermal physical properties on ablation properties of high silica/phenolic composite. Guti Huojian Jishu/Journal of Solid Rocket Technology. 2011;34(3):354-359. 全文
Liang J, Liang J, Fang G, Pan Z, Li W. Evaluation on spot weld models in structural dynamic analysis of automotive body in white. Chinese Journal of Mechanical Engineering (English Edition). 2011;24(1):84-90.
Fang G*, Liang J, Wang B, Wang Y. Effect of interface properties on mechanical behavior of 3D four-directional braided composites with large braid angle subjected to uniaxial tension. Appl Compos Mater. 2011;18(5):449-465. Fullpaper
Fang G*, Liang J, Lu Q, Wang B, Wang Y. Investigation on the compressive properties of the three dimensional four-directional braided composites. Composite Structures. 2011;93(2):392-405.
Fang G, Liang J. A review of numerical modeling of three-dimensional braided textile composites. Journal of Composite Materials. 2011;45(23):2415-2436. Fullpaper
Liang J, Wang Y, Fang G, Han J. Research on thermal shock resistance of ZrB2-SiC-AlN ceramics using an indentation-quench method. J Alloy Compd. 2010;493(1-2):695-698.
2009年度
Fang Guodong*, Liang Jun, Wang Yu, Wang Baolai. The effect of yarn distortion on the mechanical properties of 3D four-directional braided composites. Composites Part A: Applied Science and Manufacturing. 2009;40(4):343-350. Fullpaper
Fang Guodong*, Liang Jun, Wang Baolai. Progressive damage and nonlinear analysis of 3D four-directional braided composites under unidirectional tension. Composite Structures. 2009;89(1):126-133. Fullpaper
專利
ZL201610546102.2 基於Micro-CT三維編織複合材料非均勻Voxel格線離散方法，發明人：方國東，陳城華，梁軍
CN201710178745.0 用於測量材料內部溫度的敏感元件及基於該敏感元件的溫度感測器 方國東，吉慶祥，梁軍
CN201710352165.9 針刺預製體單胞的有限元建模方法 方國東，謝軍波，梁軍
CN201811527772.5 一種複合材料薄壁螺栓連線組合結構快速等效建模方法， 方國東，付茂青，梁軍
CN201910622709.8 一種熱電器件熱電性能的測試裝置及測試方法 易法軍, 王章文，方國東，孟松鶴，解維華，金華
會議
博士生王兵，於2019年11月28日至2019年11月30日參加第四屆中國國際複合材料科技大會（CCCM-4）-中國珠海，並作“基於FFT方法的單向碳纖維/納米粒子增強樹脂基複合材料縱向壓縮強度研究”的口頭報告。
方國東於2019年10月25-26日在大連參加了第三屆複合材料力學與工程研討會，做了“三維編織複合材料精細化建模及多尺度失效分析”的邀請報告。
方國東於2019年9月21-23日參加了在哈爾濱舉辦的The 7th International Conference on Smart Materials and Nanotechnology in Engineering （SMN2019）會議，為“Muctifunctional Mateials and structures”的Session Chair， 做了“Study on the longtitudinal compressive properties of unidirectional carbon fiber and nanoparticles reinforced polymer composites”的報告。
課題組於2019年8月25至28日在杭州參加力學大會2019，多人做了口頭報告。付茂青做了“ 基於分形接觸力學的C/SiC多釘單搭接連線結構釘載分析”的報告；車路做了“某型號飛機機翼前緣的構型預報及模具補償研究”報告；劉碩做了“一種針對各向異性材料的零能模式控制方法”報告；王兵做了“耦合多尺度分析三維編織複合材料失效行為”的報告；李偉做了“細觀特徵對三維四向碳纖維編織複合材料熱化學燒蝕行為的影響”的報告；戚雲超做了“不同針刺工藝的針刺複合材料剛度性能的預測”的報告。
戚雲超與2019年8月11至16日到澳大利亞墨爾本參加22nd International Conference on Composite Materials（ICCM22），做了“The optimization of process parameters of three-dimensional needled composites based on ANN and GA”的口頭報告。
方國東於2018年11月2日至4日在西安參加了航空航天先進複合材料結構設計和製造技術學科論壇。
方國東於2018年8月14至2018年8月16日在北京參加了第八屆全國固體力學青年學者學術研討會。
李偉和付茂青於2018年7月29日至2018年8月1日參加了在澳大利亞凱恩斯舉辦的第11屆亞澳複合材料會議（11th Asian-Australian conference on composite materials ACCM-11），並且做了“Experimental and numerical ablation study of low density carbon-phenolic composites”和"Equivalent modeling for composite material thin-wall bolted-joint structures based on the nulti-point coupling element"的口頭報告。
劉碩和王兵於2018年7月22日至27日參加了在美國紐約舉辦的第十三屆世界計算力學大會(13th World Congress on Computational Mechanics )(WCCM 2018)，做了“A Coupled Finite Element Method/Peridynamics for 2D Dynamic Fracture Analysis”和“A Multiscale Method for Analyzing Progressive Damage of 3D Braided Composite Structure by Using FFT”的口頭匯報。
孟松鶴、易法軍、解維華、胡平、方國東和梁偉於2018年7月22日-24日參加了在綿陽舉辦的第三屆高超聲速流與防熱材料耦合傳熱傳質研討會，方國東做了”輕質碳酚醛複合材料高溫熱力回響計算分析“的學術報告。
方國東於2018年6月23在哈爾濱參加特種環境複合材料技術重點實驗2017年度年會，做了“編織複合材料精細化建模及力學性能分析”的學術報告。
吉慶祥於2018年6月15日至18日參加了在捷克布拉格舉辦的第七屆工程數學與物理國際會議 （2018 The 7th International Conference on Engineering Mathematics and Physics（ICEMP 2018）），做了“Transformation Thermodynamics with Arbitrarily Shaped Non-Conformal Objects and Coatings”的口頭報告。
方國東於2018年5月26至27日參加在合肥舉辦的中科大-哈工大特種環境材料力學行為雙邊學術研討會，做了“近場動力學與有限元方法耦合求解材料破壞問題”的學術報告。
方國東於2017年10月21日至23日在杭州參加了第三屆中國國際複合材料科技大會（CCCM13），做了“低密度碳/酚醛複合材料熱/化學回響分析”的口頭報告。
梁軍，方國東，劉碩和王兵於2017年8月20至25日參加了第21屆國際複合材料會議（ICCM21），做了“A coupled FEM/PD based on substructure method for progressive damage analysis of composite laminate”和“Multiple voxel for computing the composite behavior with spectral method”的口頭報告。
梁軍，方國東，李偉，劉碩，吉慶祥，吳增文和付茂青於2017年8月13日至16日參加了中國力學大會2017暨慶祝中國力學學會成立60周年大會，做了“基於多點耦合單元的複合材料薄壁螺栓連線結構等效建模”，“低密度碳/酚醛複合材料氧乙炔燒蝕實驗及數值模擬研究”，“State-based近場動力學方法與有限元法耦合求解裂紋擴展問題”，“隨機載荷作用下複合材料薄壁結構疲勞特性研究”，“具有任意橫截面的熱流調控工具的設計與研究”。
方國東，謝軍波和吳增文於2016年7月24日至29日參加的在韓國首爾召開第20屆世界計算力學大會（WCCM Ⅻ）暨第6屆亞太地區計算力學會議（APCOM VI），做了“Realistic voxel-based unit cell modelling for 3D four-directional composites”，“Parametric modeling and analysis for strength discreteness of 3D needled C/C-SiC composites”和“The Dynamic Response Characteristics of the composite thin-wall Structure with Local Damages”的口頭報告。
方國東於2015年7月19日至24日參加了在哥本哈根舉辦的第20屆國際複合材料會議（ICCM20），做了“Analysis of composites using the voxel finite element method with stress averaging”的口頭報告。
梁軍和方國東於2014年6月11日至16日參加了在西安舉辦的第9屆國際科學計算及套用大會（The 9th International Conference on Scientific Computing and Applications）做了“Numerical Prediction of Mechanical Properties of Braided Composites”的口頭報告。
梁軍和方國東於2013年7月27至31日參加了在加拿大蒙特婁舉辦的第19屆國際複合材料會議（ICCM19），做了“Strength Analysis of 3D axial braided composites”的口頭報告。
Wan XY, Liang J, Fang GD, Wang LL. Numerical simulation of pre-crack propagation in ZrB2-SiC-AlN ceramics subjected to thermal shock. 2013 Dianchi Advanced Materials Forum, July 23, 2013 - July 25, 2013, vol. 833 Kunming, China: Trans Tech Publications Ltd; 2014. p. 154-158.
Wang B, Wang Z, Fang G, Liang J, Zhou L. Research on tensile properties and size effect of 3D four-directional braided composites. 2011 International Conference on Environmental Biotechnology and Materials Engineering, EBME 2011, March 26, 2011 - March 28, 2011, vol. 183-185 Harbin, China: Trans Tech Publications; 2011. p. 2183-2186.
Wang B, Wang Z, Fang G, Liang J, Zhou L. Experimental investigation on compressive properties for 3D four-directional braided composites. 2011 International Conference on Materials Science and Engineering Applications, ICMSEA 2011, January 15, 2011 - January 16, 2011, vol. 160-162 Xi@#%an, China: Trans Tech Publications; 2011. p. 1744-1748.
Shi SB, Liang J, Fang GD, Wang LL. Evaluation of the effective properties of high silica/phenolic composite under volumetric ablation condition. 3rd International Conference on Heterogeneous Materials Mechanics, ICHMM 2011, May 22, 2011 - May 26, 2011, Shanghai, China: DEStech Publications Inc.; 2011. p. 687-690.
Lu Q, Liang J, Fang GD. Effect of chosen damage initiation criteria of constituents on the predicted strength of 3D fine woven punctured C/C composites. 3rd International Conference on Heterogeneous Materials Mechanics, ICHMM 2011, May 22, 2011 - May 26, 2011, Shanghai, China: DEStech Publications Inc.; 2011. p. 901-904.
Liang J, Liang J, Fang G, Pan Z, Li W. Evaluation on spot weld models in structural dynamic analysis of automotive body in white. Chinese Journal of Mechanical Engineering (English Edition). 2011;24(1):84-90.
Fang GD*, Liang J, Han JC. Experimental and numerical study of mechanical properties of three dimensional four directional braided composites. 18th International Conference on Composites Materials, ICCM 2011, August 21, 2011 - August 26, 2011, Jeju, Korea, Republic of: International Committee on Composite Materials; 2011.
Liang J, Fang GD, Du SY. The effect of interface properties on the mechanical behavior of 3D braided composites under unidirectional tensile loading. 17th International Conference on Composite Materials, ICCM-17, July 27, 2009 - July 31, 2009, Edinburgh, United kingdom: International Committee on Composite Materials; 2009. p. Office of Naval Research Science and Technology (ONR); INSTRON; ELSEVIER; Vestas; AIRBUS.
專著
出版物名稱
三維編織複合材料材料力學性能分析方法
作者
梁軍，方國東
出版時間,完成時間
2014-03-01
出版社
簡單介紹
本書對三維編織複合材料及其組分材料的力學性能分析方法進行了系統的闡述，並且論述了C/C編織複合材料工藝過程中的力學性能和高矽氧/酚醛編織複合材料的高溫力學性能分析方法。希望本書能夠成為從事紡織複合材料研製和套用設計人員、複合材料力學工作者及相關專業研究生的參考書。
出版物名稱
Chapter 5. Analysis of braided composites
作者
Fang GD, Liang J
出版時間,完成時間
2015-06-01
出版社
CRC Press
簡單介紹
In Book "Braided Structures and Composites: Production, Properties, Mechanics and Technical Applications" edited by Sohel Rana and Raul Fangueiro
出版物名稱
第十二章炭炭複合材料製備與套用技術
作者
梁軍，方國東，黃啟忠，羅瑞盈，楊鑫
出版時間,完成時間
2017年10月
出版社
複合材料學會
簡單介紹
在《複合材料學科方向預測及技術路線圖》中
