夏國棟

夏國棟

夏國棟，男，博士，北京工業大學環境與能源工程學院教授，博士生導師，黨委書記。

基本介紹

  • 中文名：夏國棟
  • 職業：教師
  • 畢業院校：西安交通大學
  • 學位/學歷：博士
  • 職務：北京工業大學環境與能源工程學院黨委書記
人物經歷,研究方向,科研成果,

人物經歷

1982年--1987年 清華大學 機械工程專業 學士
1991年--1994年 東北電力大學 電廠熱能動力工程專業 碩士
1994年--1996年 西安交通大學 熱能工程專業 博士
1996年--1998年 北京理工大學 博士後
1998年-現在北京工業大學 教師
2000年-2001年德國漢諾瓦大學訪問學者

研究方向

1.多相流與傳熱
2.微尺度流動與傳熱
3.微電子器件冷卻技術
4.節能與可再生能源利用

科研成果

2017年
  1. XiaG D,Cao L, Bi G L. A review on battery thermalmanagement in electric vehicle application. Journal of Power Sources,2017, 367: 90-105.
  2. Ma D D,Xia G D, Wang J, Yang Y C, Jia Y T,Zong L X. An experimental study on hydrothermal performance of microchannelheat sinks with 4-ports and offset zigzag channels. Energy Conversion andManagement,2017, 152:157-165
  3. XiaG D,Chen Z, Cheng L X, Ma D D, Zhai Y L.Micro-PIV visualization and numerical simulation of flow and heat transfer inthree micro pin-fin heat sinks. International Journal of Thermal Sciences,2017, 119:9-23.
  4. XiaG D,Du M, Cheng L X, Wang W. Experimental study on the nucleate boiling heattransfer characteristics of a water-based multi-walled carbon nanotubesnanofluid in a confined space. International Journal of Heat and Mass Transfer,2017, 113: 59-69.
  5. Xia G D, Wang W, Cheng L X, Ma D D. Visualization study on theinstabilities of phase-change heat transfer in a flat two-phase closedthermosyphon[J]. Applied Thermal Engineering,2017,116:392-405.
  6. Cheng L X,Xia G D. Fundamental issues, mechanismsand models of flow boiling heat transfer in microscale channels[J]. InternationalJournal of Heat and Mass Transfer,2017, 108：97-127.
  7. Li Y F,Xia G D, Jia Y T, Cheng Y, Wang J. Experimental investigation offlow boiling performance in microchannels with and without triangular cavities –A comparative study[J], International Journal of Heat and Mass Transfer,2017, 108：1511-1526.
  8. Li Y F,Xia G D, Jia Y T, Ma D D, Cai B, Wang J. Effect of geometricconfiguration on the laminar flow and heat transfer in microchannel heat sinkwith cavities and fins[J]. Numerical HeatTransfer, Part A: Applications,2017, 71 (5): 528-546.
  9. Zhai Y L，Xia G D，Li Z H，Wang H，Experimentalinvestigation and empirical correlations of single and laminar convective heattransfer in microchannel heat sinks[J]. Experimental Thermal and Fluid Science,2017, 83:207-214.
  10. Wang J, Luo S,Xia G D. Thermophoretic force onnanocylinders in the free molecule regime[J]. Physical Review E,2017,95, 033101.
    2016年
  11. Ma D D,Xia G D, Li Y F, Jia YT, Wang J. Effects of structural parameters on fluid flow and heat transfercharacteristics in microchannel with offset zigzag grooves in sidewall.International Journal of Heat and Mass Transfer,2016,101: 427-435.
  12. Ma D D,Xia G D, Li Y F, Jia YT, Wang J. Design study of micro heat sink configurations with offset zigzagchannel for specific chips geometrics. Energy Conversion and Management,2016, 127: 160-169.
  13. Chai L,Xia G D, Wang H S.Laminar flow and heat transfer characteristics of interrupted microchannel heatsink with ribs in the transverse microchambers. International Journal ofThermal Science,2016,110:1-11.
  14. ChaiL,Xia G D, Wang H S. Numerical study of laminar flow and heat transferin microchannel heat sink with offset ribs on sidewalls. Applied ThermalEngineering,2016, 92:32-41.
  15. Chai L,Xia G D, Wang H S.Parametric study on thermal and hydraulic characteristics of laminar flow inmicrochannel heat sink with fan-shaped ribs on sidewalls–Part 1: Heat transfer.International Journal of Heat and Mass Transfer,2016,97: 1069-1080.
  16. Chai L,Xia G D, Wang H S.Parametric study on thermal and hydraulic characteristics of laminar flow inmicrochannel heat sink with fan-shaped ribs on sidewalls–Part 2: Pressure drop.International Journal of Heat and Mass Transfer,2016,97: 1081-1090.
  17. Chai L,Xia G D, Wang H S.Parametric study on thermal and hydraulic characteristics of laminar flow inmicrochannel heat sink with fan-shaped ribs on sidewalls–Part 3: Performance evaluation.International Journal of Heat and Mass Transfer,2016,97: 1091-1101.
  18. Li Y F,Xia G D, Ma D D, et al.Characteristics of laminar flow and heat transfer in microchannel heat sinkwith triangular cavities and rectangular ribs. International Journal of Heatand Mass Transfer,2016, 98: 17-28.
  19. Zhai Y L, Xia G D, Chen Z,Li Z H.Micro-PIVstudy of flow and the formation of vortex in micro heat sinks with cavities andribs. International Journal of Heat and Mass Transfer,2016,98: 380-389.
  20. Xia G D, Li Y F, Wang J, et al. Numerical andexperimental analyses of planar micromixer with gaps and baffles based on fieldsynergy principle. International Communications in Heat and Mass Transfer,2016, 71: 188-196.
  21. Xia G D, Liu R, Wang J, Du M. The characteristicsof convective heat transfer in microchannel heat sinks using Al2O3and TiO2 nanofluids. International Communications in Heat and Mass Transfer,2016, 76:256-264.
  22. Luo S, Wang J,Xia G D, Li Z G.Lift Force on Nanoparticles in Shear Flows of Dilute Gases: Negative orPositive. Journal of fluid mechanics,2016,795:443-454.
  23. Luo S, Wang J,Xia G D, Li Z G.Lift force on spherical nanoparticles in shear flows of rarefied binary gasmixtures. Journal of fluid mechanics,2016,809:345-359.
  24. Zhai Y L,Xia G D,Li Z H, Wang H.Anovel flow arrangement of staggered flow in double-layered microchannel heatsinks for microelectronic cooling. International Communications in Heat andMass Transfer,2016, 79:98-104.
  25. XiaG D,Jia Y T, Li Y T, Ma D D, Cai B. Numerical simulation and multiobjectiveoptimization of a microchannel heat sink with arcshaped grooves and ribs.Numerical Heat Transfer, Part A: Applications, 2016, 70:1041-1055
    2015年
  26. Liu X F,Xia G D, Yang G.Experimental study on the characteristics of air-water two-phaseflow in vertical helical rectangular channel,International Journal of Multiphase Flow,2015,73:227-237
  27. Zhai Y L,Xia G D, Liu X F, etal. Characteristics of Entropy generation and heat transfer in double-layeredmicro heat sinks with complex structure. Energy Conversion and Management,2015, 103:477-486.
  28. Zhai Y L,Xia G D, Liu X F, etal.Heat transfer enhancement of Al2O3-H2Onanofluids flowing through a micro heat sink with complex structure.International communications in heat and mass transfer,2015, 66:158-166.
  29. Zhou M Z,Xia G D, Chai L. Heattransfer performance of submerged impinging jet using silver nanofluids. Heat& Mass Transfer,2015,51(2):221-229.
  30. Jiao Y G,Xia G D, Huang SG. Heat transfer characteristics of the wickless jacket-type radial heatpipe. Heat Transfer Research,2015,46: 751-763.
  31. Xia G D, Ma D D, Zhai Y L, Wang W. Effects ofdifferent structures and allocations on fluid flow and heat transfer performancein 3D-IC integrated micro-channel interlayer cooling. International Journal ofHeat and Mass Transfer,2015, 91: 1167-1175
  32. Xia G D, Jiang J, Wang J,et al.Effectsof different geometric structures on fluid flow and heat transfer performancein microchannel heat sinks. International Journal of Heat and Mass Transfer,2015, 80: 439-447.
  33. Zhai Y L,Xia G D, Liu X F, etal. Exergy analysis and performance evaluation of flow and heat transfer indifferent micro heat sinks with complex structure. International Journal ofHeat and Mass Transfer,2015, 84:293-303.
  34. Xia G D, Ma D D. Experimental and numericalstudy of fluid flow and heat transfer characteristics in microchannel heat sinkwith complex structure. Energy Conversion and Management.2015, 105:848-857.
  35. Xia G D, Li Y F, Wang J. Numerical andexperimental analyses of planar micromixer with gaps and baffles based on fieldsynergy principle. International Communication in Heat and Mass Transfer,2015, 71:188-196.
  36. Chai L, Wang L, Zhou M Z,Xia G D.Two-phase flow pattern and pressure drop in silicon multi-microchannel withexpansion–constriction cross-section. Experimental Thermal and Fluid Science,2015, 60:241-251.
  37. Xia G D,Zhang Y Q, Wu YT, et al.Experimentalstudy on the performance of single-screw expander with different inlet vapordryness. Applied Thermal Engineering,2015,87:34-40
    2014年
  38. Zhai Y L,Xia G D, Liu X F, etal.Heat transfer in the microchannels withfan-shaped reentrant cavities and different ribs based on field synergyprinciple and entropy generation analysis.International Journal of Heat and Mass Transfer,2014,68: 224-233.
  39. Jiao Y G,Xia G D, Wang W G.Transient and isothermalcharacteristics of a particular heat pipe.International Communications in Heat and Mass Transfer,2014, 54: 42-47.
  40. Xia G D, Liu X F.An investigation of two-phase flow pressuredrop in helical rectangular channel. International Communications in Heat andMass Transfer,2014, 54:33-41.
  41. Chai L,Xia G D, Wang L, et al.Gas–liquid two-phase flowpatterns in microchannels with reentrant cavities in sidewall.Experimental Thermal and Fluid Science,2014,53: 86-92.
  42. Xia G D, Liu X F, Zhai Y, L et al.Single-phaseand two-phase flows through helical rectangular channels in single screwexpander prototype.Journal of Hydrodynamics, Ser. B,2014, 26(1): 114-121.
  43. Xia G D, Jiang H M,Liu R, et al.Effects of surfactant on the stabilityand thermal conductivity of Al2O3/de-ionized water nanofluids.International Journalof Thermal Science,2014, 48:118-124.
  44. Liu X F,Xia G D, Zhai Y L, etal.Numerical analysis of the two-phase pressure drop and liquiddistribution in single-screw expander prototype. Chinese ScienceBulletin, 59(33):4388-4396,2014.
  45. ZhangY Q, Wu Y T,Xia GD, et al.Development and experimental study on organicRankine cycle system with single-screw expander for waste heat recovery fromexhaust of diesel engine. Energy.2014, 77: 499-508.
    2013年
  46. Li J,Xia G D, Li Y F. Numericaland experimental analyses of planar asymmetric split‐and‐recombinemicromixer with dislocation sub‐channels.Journal ofChemical Technology and Biotechnology,2013,88(9): 1757-1765.
  47. Chai L,Xia G D, Wang L, et al.Heat transfer enhancement in microchannel heat sinks with periodicexpansion–constriction cross-sections. International Journal of Heat and MassTransfer,2013, 62: 741-751.
  48. Chai L,Xia G D, Zhou M Z, etal. Optimum thermal design of interrupted microchannel heat sink withrectangular ribs in the transverse microchambers.Applied ThermalEngineering,2013, 51(1): 880-889.
  49. Xia G D, Zhai Y L, Cui Z Z. Numericalinvestigation of thermal enhancement in a micro heat sink with fan-shapedreentrant cavities and internal ribs. Applied Thermal Engineering,2013, 58(1): 52-60.
  50. Jiao Y G，Xia G D，Huang S G. The Heat Transfer Characteristics of the Jacket-type Radial HeatPipe without Wick. Heat Transfer Research，2013, 1547:303.
  51. Xia G D, Zhai Y L, Cui Z Z. Characteristics ofentropy generation and heat transfer in a microchannel with fan-shapedreentrant cavities and internal ribs. Science ChinaTechnological Sciences,2013, 56(7):1629-1635.
    2012年
  52. Xia G D, Li J, Tian X P, et al. Analysis offlow and mixing characteristics of planar asymmetric split-and-recombine(P-SAR) micromixers with fan-shaped cavities.Industrial &Engineering Chemistry Research,2012,51(22): 7816-7827.
  53. Zhou M Z,Xia G D, Li J, et al.Analysis of factors influencing thermal conductivity and viscosity in differentkinds of surfactant solutions. Experimental Thermal and Fluid Science,2012, 36: 22-29.
  54. Chai L,Xia G D, Qi J Z.Experimental and Numerical Study of Flow and Heat Transfer in TrapezoidalMicrochannels.Heat Transfer Engineering,2012, 33(11): 972-981.
  55. Zhou M Z,Xia G D, Chai L, etal. Analysis of flow and heat transfer characteristics of micro-pin fin heatsink using silver nanofluids. Science China Technological Sciences,2012, 55(1): 155-162.
  56. Xia G D, Chai L. Influence of surfactant ontwo-phase flow regime and pressure drop in upward inclined pipes. Journal ofHydrodynamics, Ser. B,2012, 24(1): 39-49.
    2011年
  57. Xia G D, Chai L, Zhou M Z, et al. Effects ofstructural parameters on fluid flow and heat transfer in a microchannel withaligned fan-shaped reentrant cavities. International Journal of ThermalSciences,2011,50(3): 411-419.
  58. Chai L,Xia G D, Zhou M Z, etal. Numerical simulation of fluid flow and heat transfer in a microchannel heatsink with offset fan-shaped reentrant cavities in sidewall. InternationalCommunications in Heat and Mass Transfer,2011,38(5): 577-584.
  59. Xia G D, Chai L, Wang H Y, et al. Optimumthermal design of microchannel heat sink with triangular reentrant cavities.Applied Thermal Engineering,2011, 31(6):1208-1219.
    科研項目
  60. 國家重點基礎研究發展計畫（973計畫）、2011CB710704、2011/01–2015/12
  61. 國家自然科學基金面上項目，51576005、2016/01–2019/12
  62. 國家自然科學基金面上項目，51176002、2012/01–2015/12
  63. 國家自然科學基金面上項目，50876003、2009/01–2011/12
  64. 國家自然科學基金面上項目，50476035、2005/01–2007/12
  65. 國防預研項目、97J00.05、1998/01–2000/12。
  66. 北京市自然科學基金-教委聯合基金重點項目，KZ201810005006、2018/01–2021/12
  67. 北京市自然科學基金-教委聯合基金重點項目，KZ200710005001、2007/01–2009/12
  68. 北京市自然科學基金面上項目，3142004、2014/01–2016/12
  69. 北京市自然科學基金面上項目，3092009、2009/01–2011/12
  70. 北京市自然科學基金面上項目，3052004、2005/01–2007/12
  71. 北京市科技計畫項目、Z08000903740804、2009/01–2009/7
  72. 北京市科技計畫項目、20070005009、2010/05–2011/12
  73. 北京市教委科技發展項目、KM200410005008、2004/01–2006/12
  74. 北京市優秀博士學位論文指導教師科技項目、20131000503、2014/01-2016/12
  75. 北京市拔尖創新人才項目、PHR200906104、2009/01–2011/12
  76. 北京市科技新星項目、954810800、1999/01–2004/12
  77. 北京市中青年骨幹教師項目、954810800、2006/01–2008/12
  78. 教育部博士學科點專項基金項目、20111103110009、2012/01–2014/12
  79. 教育部博士學科點專項基金項目、20070005009、2008/01–2010/12
  80. 教育部留學歸國基金項目、2003.1-2005.12
  81. 企事業委託項目等。

相關詞條

熱門詞條

聯絡我們