DIM(mm)ANSI B16.5BS1560(mm)Mss sp-44API605公差內環內徑墊片內徑<=600<=24" >=26" and <=34"±0.5>600 and <=800>24" and <=34>=36" and <=60"±0.9>800 and <=1600 >34" and <=60" ±1.3>1600>60" ±1.6墊片外徑<=600<=24"<=24"±0.9>600 and <=160000 >24" and <=60" ±1.81600>60" ±2.2外環外徑 >1/2" and <=60"±0.9<=600<=24" 0-1.0 >600 and <=1000>24" and <=34" 0-1.8>1000 and <=1600>34" and <=60" 0-2.2
註：另外，我們也可以根據JIS,JPI標準或客戶要求生產 訂貨須知：內外金屬纏繞墊在訂貨時需註明以下參數，範例： 1、內外金屬纏繞墊的類型：A B C D 2、法蘭標準：ASME B16.20 3、管路通徑、壓力等級：2" 150Lbs 4、材料種類：內環 SS316 ；內外金屬纏繞帶 SS316；填料帶：石墨；外環：碳鋼 ※ 實際套用工況不同， 以上參數僅供參考不作任何保證要求。
種類
金屬纏繞墊片的種類：
（一）基本型金屬纏繞墊、
（二）帶外環金屬纏繞墊
（三）帶內環金屬纏繞墊
（四）帶內外環金屬纏繞墊
（五）換熱器用（帶筋）
（六）異形金屬纏繞墊
金屬纏繞墊片（基本型）採用優質SUS304、SUS316（“V”形或“W”形) 金屬帶及其它合金材料與石墨、石棉、聚四氟乙烯、無石棉等軟性材料相互重疊螺旋纏繞而成，在開始及末端用點焊方式將金屬帶固定。 1.金屬帶材料 A. 採用厚度為0.15mm~0.25mm的08F，0Cr13, 0Cr18Ni19Ti, 0Cr18Ni9Ti, 00Cr18Ni10, 0Cr18Ni12Mo2Ti, 00Cr17Ni14Mo2,201,304,316等冷軋鋼帶，或由供需雙方協商 確定。 B. 金屬帶為預成型的V型或W型窄帶，表面應光滑.潔淨，不應有粗糙不平.裂紋.劃傷.凹坑及銹斑等缺陷 C.不鏽鋼的硬度值 HV≤200 D.一般的鋼帶的寬度是3.2mm,4.5mm,8mm,W型的鋼帶可以更厚。 2. 非金屬帶材料 A 非金屬填充為特製的石棉帶，柔性石墨帶，聚四氟乙烯帶，非石棉纖維帶，陶瓷纖維及雲母帶等。帶的厚度為 0.3-1.0mm。 B. 特製石棉燒失量必須≤25% C. 非金屬帶的氯離子含量≤100PPM D.各類介質及各種非金屬帶的推薦使用溫度及壓力 E.一般的鋼帶的寬度是3.2mm,4.5mm,8mm 3.內外環材料 常用的有304SS,316LSS,321SS,347SS,碳鋼,鈦,銅. mix: The flange on the pad designs to facilitate the installation of the Company under the gasket-caliber size, the gasket external welding a 2 ~ 8 positioning belt buckle for positioning hole in the flange, to prevent displacement installation gasket or falling out of the supporting material and saving hours of work. Types and gasket materials 1, Winding pads divided into four forms: that is, as the basic type A, B band strengthen ring, the C-band to strengthen the ring, the D-band, the strengthening ring. 2, the general use of materials A strip: 0 Cr13, 0Cr18Ni9 (304), 0Cr18Ni9Ti, 1Cr18Ni9Ti (321), 0Cr17Ni12Mo2 (316), 00Cr17Ni14Mo2 (316L) B, both inside and outside ring materials are A3, 304,316,316 L C, non-metallic sandwich belt: Flexible Graphite PTFE, custom-made asbestos. 使用範圍： Use of: 1、使用溫度：-196℃-650℃ 1, the use of Temperature: -196 ° C -650 ° C （氧化介質中不高於450℃） Oxidation medium does not exceed 450 ° C) 2、使用壓力≤ 26MPa 2, the use of pressure ≤ 25MPa 3、墊片厚度：2.5-4.5mm 3, gasket thickness :2.5-4.5 mm 性 能： 1、適用範圍廣。能耐高溫、高壓和適應超低溫或真空下使用。 2、套用補償能力強。在高溫、高壓波動頻繁的工位上，密封性能穩定、可靠性強。 3、有良好的密封性能。 4、使用安裝方便。 Performance: 1, the scope of application-Canton. Can high temperatures, high pressure and adapt to ultra-low-temperature vacuum or use. 2, the ability of compensation. At high temperature, high pressure fluctuations frequent-position, the sealing performance stability and reliability. 3, a good sealing performance. 4, the use of the installation convenience
