亢力強

亢力強，男，博士，重慶大學能源與動力工程學院副教授。

基本介紹

• 中文名：亢力強
• 學位/學歷：博士
• 職業：教師
• 專業方向：循環流化床燃燒理論與技術、電廠熱能動力
• 任職院校：重慶大學能源與動力工程學院

個人經歷

2005/09-2009/06，重慶大學，學士，熱能與動力工程。

2010/09-2011/06，重慶大學，碩士，動力工程及工程熱物理，導師：盧嘯風(教授)。

2011/09-2015/06，重慶大學，博士，動力工程及工程熱物理，導師：盧嘯風(教授)。

2017/03-2018/03，美國康乃狄克大學，訪問學者，導師：Tianfeng Lu (教授)。

研究方向

(1)循環流化床燃燒理論與技術，電廠熱能動力。

(2)電廠節能減排與燃燒環保新技術，包括：高溫固體散料餘熱回收技術，露點蒸發冷卻技術，燃燒污染物排放機理，等等。

(3)計算流體力學。

(4)燃燒學、燃燒數值模擬及數值診斷。

(5)燃燒反應動力學與機理簡化。

學術成果

擔任《Fuel》、《energy & fuels》、《Energy Conversion and Management》等國際期刊審稿人。發表學術論文近30篇，其中的一篇入選ESI高被引論文，獲國家發明專利授權1項。

在研科研項目：

[1]重慶市自然科學基金: “微重力環境下“冷焰”球形擴散火焰的振盪動力學特性及熄火機理”,主持.

[2]國家自然科學基金青年科學基金: “近熄火極限條件下基於基元反應與熱質擴散耦合誘導的振盪熄火機理研究”,主持.

[3]科技部國家重點研發計畫(子課題): “660 MW高效超超臨界循環流化床鍋爐關鍵技術研究”,主研。

[4]企業橫向課題: “基於錯流移動床換熱技術的高溫固體散料餘熱高質高效回收系統研發”, “基於M循環的露點蒸發冷卻換熱技術研究”,主研。

[5]中國博士後科學基金項目: “二甲醚/乙烯火焰碳黑顆粒物排放機理的研究”,主持.

[6]重慶市博士後科研項目特別資助: “高壓層流乙烯射流火焰碳黑顆粒物排放機理及顆粒群動力學演變行為研究”,主持.

[7]中央高校基本科研業務經費專項項目: “高壓和中高強度低氧稀釋燃燒條件下碳黑顆粒物排放機理研究”,主持.

[8]中央高校基本科研業務經費專項項目: “基於鍋爐套用的二甲醚/甲烷摻混燃燒特性研究”,主持.

發表論文：

[1]Yinhu Kang, Qiang Wang, Pengyuan Zhang, et al. Study on flame structure and extinction mechanism of dimethyl ether spherical diffusion flames. Energy,

[2]Zejun Wu,Yinhu Kang, Xiaomin He. Numerical study on the morphology of a re-ignited laminar partially premixed flame with a co-axial pilot flame. Journal of Thermal Science (2020).

[3]Pengyuan Zhang,Yinhu Kang, Zejun Wu, et al. Effect of dimethyl ether addition on soot formation dynamics of ethylene opposed-flow diffusion flames. Industrial & Engineering Chemistry Research,

[4]Pengyuan Zhang,Yinhu Kang, Xiaomei Huang, Shini Peng. Study on effect of hydrogen addition on extinction dynamics of dimethyl ether spherical diffusion flame. International Journal of Hydrogen Energy,

[5]亢銀虎,張弋,張朋遠,盧嘯風.湍流熱伴流條件下二甲醚射流推舉火焰的冷焰特性與穩定機理.中國電機工程學報,

[6]亢銀虎,張弋,張朋遠,盧嘯風.二甲醚球形擴散火焰的振盪熄火動力學機理研究.化工學報,

[7]亢銀虎,張朋遠,劉蔥蔥,馬江澤,盧嘯風.基於化學爆炸模式分析方法的乙烯對沖擴散火焰熄火機理.化工學報,

[8]Jie Chen,Yinhu Kang, Yunpeng Zou, et al. A numerical study on near-limit extinction dynamics of dimethyl ether spherical diffusion flame. Fuel Processing Technology,

[9]Jin Yan, Xiaofeng Lu, Quanhai Wang,Yinhu Kang, et al. Study on the influence of secondary air on the distributions of flue gas composition at the lower part of a 600 MW supercritical CFB boiler. Fuel Processing Technology,

[10]Yinhu Kang, Yuming Sun, Xiaofeng Lu, et al. Soot formation characteristics of ethylene premixed burner-stabilized stagnation flame with dimethyl ether addition. Energy,

[11]Yinhu Kang, Shuang Wei, Pengyuan Zhang, Xiaofeng Lu, et al. Detailed multi-dimensional study on NOxformation and destruction mechanisms in dimethyl ether/air diffusion flame under the moderate or intense low-oxygen dilution (MILD) condition. Energy,

[12]Yinhu Kang, Wei Shuang, Xingchi Jiang, et al. Study on effect of dimethyl ether addition on combustion characteristics of turbulent methane/air jet diffusion flame. Fuel Processing Technology,

[13]Jin Yan, Xiaofeng Lu, Quanhai Wang,Yinhu Kang, et al. Experimental and numerical study on air flow uniformity in the isobaric windbox of a 600MW supercritical CFB boiler. Applied Thermal Engineering,

[14]YinhuKang, Tianfeng Lu, Xiaofeng Lu, et al. Study on combustion characteristics of dimethyl ether under the moderate or intense low-oxygen dilution condition. Energy Conversion and Management,

[15]YinhuKang, Tianfeng Lu, Xiaofeng Lu, et al. On predicting the length, width, and volume of the jet diffusion flame. Applied Thermal Engineering,

[16]YinhuKang, Quanhai Wang, Xiaofeng Lu, et al. Experimental and numerical study on NOxand CO emission characteristics of dimethyl ether/air jet diffusion flame. Applied Energy,

[17]YinhuKang, Quanhai Wang, Xiaofeng Lu, et al. Experimental and theoretical study on radiative heat transfer characteristics of dimethyl ether jet diffusion flame. Fuel,

[18]Yinhu Kang, Xiaofeng Lu, Quanhai Wang, et al. Effect of H₂addition on combustion characteristics of dimethyl ether jet diffusion flame. Energy Conversion and Management,

[19]Yinhu Kang, Quanhai Wang, Xiaofeng Lu, et al. Experimental and theoretical study on the flow, mixing, and combustion characteristics of dimethyl ether, methane, and LPG jet diffusion flames. Fuel Processing Technology,

[20]Hu Wang, Xiaofeng Lu, Wenqing Zhang, Quanhai Wang, Jianbin Chen,Yinhu Kang, et al. Study on heat transfer characteristics of the high temperature reheater tube panel in a 300 MW CFB boiler with fluidized bed heat exchanger. Applied Thermal Engineering,

[21]Yinhu Kang, Xiaofeng Lu, Quanhai Wang, et al. An experimental and modeling study of NOxand CO emission behaviors of dimethyl ether (DME) in a boiler furnace. Fuel Processing Technology,

[22]Yinhu Kang, Xiaofeng Lu, Quanhai Wang, et al. Experimental and modeling study on the flame structure and reaction zone size of dimethyl ether/air premixed flame in an industrial boiler furnace. Energy & Fuels,

[23]Xuanyu Ji, Xiaofeng Lu,Yinhu Kang, et al. Design optimization of the bell type blast cap employed in small scale industrial circulating fluidized bed boilers. Advanced Powder Technology,

[24]Honghao He, Xiaofeng Lu, Wei Shuang, Quanhai Wang,Yinhu Kang, et al. Statistical and frequency analysis of the pressure fluctuation in a fluidized bed of non-spherical particles. Particuology,

[25]亢銀虎,盧嘯風,嚴謹,宋楊凡,孫思聰.基於多尺度模擬的二甲醚MILD火焰NOx排放機理.燃燒科學與技術,

[26]亢銀虎,盧嘯風,黃小美,彭世尼,陽東.一種新型的預測射流擴散火焰長度、直徑和體積的方法.燃燒科學與技術,

榮譽獎項

獲重慶大學優秀博士學位論文等獎勵。