丁安心，男，教授，畢業於武漢理工大學複合材料系，現就職於武漢理工大學材料科學與工程學院/材料複合新技術國家重點實驗室，複合材料系副主任。從事高分子及複合材料結構設計、性能評價、固化變形與應力預測。
基本介紹
- 中文名：丁安心
- 國籍：中國
- 民族：漢
- 出生地：湖北漢川
- 出生日期：1987年3月
- 畢業院校：武漢理工大學
- 學位/學歷：博士/博士研究生
- 職業：教師、科研工作者
- 專業方向：高分子和複合材料、力學
- 職務：複合材料系副主任
- 學術代表作：[1]Chen J, Wang, J, Li S, Wang C, Ding A*. Analytical solutions for process-induced spring-in of U-shaped composite part. Thin walled structures. 169(2021) 108425
Chen J, Wang J, Ding A*, Ni A*. Chen H. Flame retardancy and mechanical properties of glass fibre reinforced polyethylene composites filled with novel intumescent flame retardant. Composites Part B: Engineering. 2019;179:107555
Ding A, Wang J, Ni A*, Li S*. A new analytical solution for cure-induced spring-in of L-shaped composite parts. Composites Science and Technology. 2019;171:1-12
人物經歷,研究方向,發表論文,
人物經歷
高分子與複合材料，教授，2020-至今
武漢理工大學材料科學與工程學院/材料複合新技術國家重點實驗室
專業領域：高分子與複合材料的製備與設計
高分子與複合材料，講師，2019.11-2020.6
武漢理工大學材料科學與工程學院/材料複合新技術國家重點實驗室
專業領域：高分子與複合材料的製備與設計
複合材料與工程，博士後，2017.08-2019.07
慕尼黑工業大學（TUM）碳纖維複合材料中心(LCC)
專業領域：汽車和航空用複合材料
複合材料與工程，工學博士 2013.09~2016.12
武漢理工大學材料複合新技術國家重點實驗室
專業領域：複合材料結構與設計
研究方向
複合材料與工程:
1. 熱固性樹脂基複合材料固化殘餘應力和變形預測
2. 複合材料損傷、疲勞和失效分析
3. 基於FBG技術的複合材料結構健康監測
4. 熱塑性複合材料的製備與套用
高分子/聚合物工程
1. 基於熱-力耦合的聚合物行為預測
2. 聚合物的鬆弛和蠕變研究
3. 熱固性樹脂的固化動力學
4. 高分子/聚合物老化機理
發表論文
[1]Chen J, Wang, J, Li S, Wang C, Ding A*. Analytical solutionsfor process-induced spring-in of U-shaped composite part. Thin walled structures. 169(2021) 108425
[2] Li X, Wang J, Li S, Ding A*. Cure-inducedtemperature gradient in laminated composite plate: Numerical simulation and experimentalmeasurement. Composite Structures. 253(2020)112822
[3] Ding A, Wang J*, Li X*. Understanding process-induced spring-in of L-shaped composite partsusing analytical solution. CompositeStructures. 250 (2020) 112629
[4] Chen J, Wang J, Li X, Sun L, LiS, Ding A*. Monitoring oftemperature and cure-induced strain gradient in laminated composite plate withFBG sensors. Composite Structures.2020;242:112168
[5] Chen J, Wang J, Ding A*, Ni A*. Chen H. Flameretardancy and mechanical properties of glass fibre reinforced polyethylenecomposites filled with novel intumescent flame retardant. Composites Part B: Engineering. 2019;179:107555
[6] Ding A, Wang J, Ni A*, Li S*. Assessment on the ageing of sandwich composites withvinylester-based composite faces and PVC foam core in various harshenvironments. Composite Structures. 2019;213:71-81
[7] Ding A, Wang J, Ni A*, Li S*. A new analytical solution for cure-induced spring-in ofL-shaped composite parts. Composites Science and Technology.2019;171:1-12
[8] Ding A, Wang J*, Ni A, Li S*. Hygroscopic ageing of nonstandard size sandwich compositeswith vinylester-based composite faces and PVC foam core. Composite Structures. 2018;206:194-201
[9] Ding A, Wang J*, Ni A, Li S*. Ageingof sandwich composites with E-glass fibre/vinylester skins and PVC foam core insynergistic environmental agents. CompositeStructures. 2018;202:253-60
[10] Ding A, Li S*, Wang J, Ni A*.A new analytical solution for spring-in of curved composite parts. Composites Science and Technology. 2017;142:30-40
[11] Ding A, Li S*, Wang J, Ni A*,Zu L. A new path-dependent constitutive model predicting cure-induceddistortions in composite structures. CompositesPart A. 2017;95:183-86
[12] Sun L, Wang J, Ni A*, Li S, Ding A*, Modelling andexperiment of process-induced distortions in unsymmetrical laminate plates, Composite Structures. 2017;182:524-32
[13] Ding A, Li S*, Sun J, Wang J*, Lei Z. A comparison of process-induced residualstresses and distortions in composite structures with different constitutivelaws. Journal of Reinforced Plastics andComposites. 2016;35:807-23
[14] Ding A, Li S*, Sun J, Wang J*,Lei Z. A thermo-viscoelastic model of process-induced residual stresses incomposite structures with considering thermal dependence. Composite Structures. 2016;136:34-43
[15] Ding A, Li S*, Wang J, Ni A*,Sun J, Chang L. Prediction of process-induced distortions in L-shaped compositeprofiles using path-dependent constitutive law. AppliedComposite Materials.2016,23(5):1027-45
[16] Ding A, Li S, Wang J, Zu L*.A three-dimensional thermo-viscoelastic analysis of process-induced residual stress in composite laminates. CompositeStructures. 2015;129:60-9.
[17] Ding A, Li S, Zu L, Wang J*. High temperature behaviour ofglass-vinyl ester stack liner. Plastics,Rubber and Composites. 2015;44:423-34
