madvr

madvr

madVR是madshi開發的一種視頻渲染方式,是一種高品質的視頻渲染器(GPU的協助下),可與媒體播放器經典家庭影院或其他任何媒體播放器,支持madVR使用;只需選擇作為媒體播放器的設定首選渲染madVR。

基本介紹

  • 中文名:madvr
  • 類別:視頻渲染方式
  • 開發公司:madshi
  • 歸屬:高品質的視頻渲染器
介紹,最佳配置,使用教程,首先,其次,最後,更新日誌,v0.87.6,v0.87.5,v0.87.4,v0.87.3,v0.87.2,v0.87.1,v0.87.0,

介紹

較強的渲染神器。你可以根據自己的實際硬體來定製屬於你自己的最佳顯示效果。
madvr

最佳配置

根據madvr的作者描述:
Users are saying that the 660 can do every scaling algorithm at any refresh rate.
即,如果你的顯示卡是等同於660或者高於660,那你肯定能使用裡面的所有功能。

使用教程

這裡簡單來說明一下通用步驟。
其實註冊了之後,如果默認的設定合適你的機器,那你完全不需要再手動設定什麼了。畢竟推薦的比較帶綜合性。
一般都只有發燒友才需要那些高深的調整。

首先

無論什麼渲染器,開始使用前都得註冊一下,這個應該是基本中的基本。
註冊你完全可以運行壓縮檔中的Install.BAT進行註冊(Win7以上系統要以管理員身份運行)。
又或者你可以自己通過命令行註冊。
進入到MADVR資料夾,輸入下方代碼即可:
InstallFiltermadVR.ax

其次

確定你的顯示設備。如TV或者顯示器,一般來說選擇Digital monitor 就可以了(液晶
madvr

最後

madvr
選擇渲染模式scaling algorithms。一般來說,從上到下,效果最好,但對硬體的需求就越大。這裡你完全可以根據自己的硬體設定屬於你自己的配置。畢竟只有屬於自己的才是最好的。

更新日誌

v0.87.6

* fixed: #090: FSE mode switched to 23Hz instead of 24Hz in Windows 8
* fixed: #127: crash when jumping to next video file on secondary monitor
* fixed: #173: overlay: exiting multiple windows in same order -> black screen
* madTPG now forces ordered dither, but you can en/disable colored & dynamic
* added support for new subtitle API ISubRenderConsumer2::Clear()

v0.87.5

* error diffusion now uses DirectCompute (DX11 GPU needed) instead of OpenCL
* added fast and reasonably high quality "ordered dithering" algorithm
* added "rendering\dithering" settings page with many new options
* new default dithering is now ordered dithering instead of random dithering
* madTPG now always uses monochromatic ordered dithering
* fixed: #107: XySubFilter: reducing CPU queue size during playback -> crash
* fixed: #112: 120fps clip resulted in 23Hz being selected instead of 60Hz
* fixed: #119: installation resulted in "might not have installed correctly"
* fixed: #123: XySubFilter: Nearest Neighbor/Bilinear distorted subtitles
* fixed: #125: forced film mode with unsupported FOURCCs: graphical corruption
* fixed: #133: XySubFilter: opaque black box when smooth motion was enabled
* fixed: #136: when playback is stopped, madVR now always turns the video off
* fixed: #137: Nearest Neighbor/Bilinear has problems with post-resize shaders
* fixed: #138: smooth motion FRC flickered when using Nearest Neighbor
* fixed: #145: DCI-P3 was using an incorrect white point
* fixed: #155: screeshots sometimes had an added black border
* fixed: #159: speciying DCI-P3 as the calibrated gamut -> green screen
* fixed: #160: corruption with uncompressed 4096x2304 v210 in AVI
* fixed: #161: YUV 4:4:4 videos with weird resolutions crashed madVR
* fixed: #165: overlay mode restricted madVR to single player window
* fixed: #167: dithering produced dithering noise on pure black areas
* fixed: #169: dithering produced dithering noise on pure white areas
* fixed: #170: Overlay mode sometimes unnecessarily cleared GPU gamma ramps
* fixed: Overlay mode applied 3dlut and gamma ramps in wrong order
* fixed: crash reporting didn't catch exceptions in private threads, anymore
* fixed: crash when using XySubFilter with small GPU queue size
* fixed: DVD navigator was not released properly by madVR
* fixed: Run/Seek hooks also affected secondary DirectShow graphs
* fixed: profile key shortcuts only worked for "scaling" profiles
* fixed: full range YCbCr input produced slightly incorrect colors
* reduced Overlay mode graphical corruption when resizing media player
* exclusive -> windowed switch now shows a black frame instead of an old one
* removed XySubFilter auto-loading functionality, it's now XySubFilter's job
* disabled resolution based DCI-P3 auto detection
* changed default luma doubling value to 32 neurons
* display bitdepth can be be set to as low as 3bit (just for testing)

v0.87.4

* workaround added: NNEDI3 upscaling failed/froze with newer NVidia GPUs
* fixed: NNEDI3 chroma upscaling produced wrong colors with 10bit sources
* got rid of some unnecessary texture sharing

v0.87.3

* fixed: blacked out video in Windows XP
* fixed: blacked out video when disabling "present several frames in advance"

v0.87.2

* fixed: D3D9 device wasn't freed properly, resulting in stability problems
* fixed: using shared NV12 surfaces resulted in DXVA performance drop
* fixed: opening settings without connected decoder took 5 seconds
* fixed: chroma Jinc keyboard shortcut activated NNEDI3
* fixed: chroma NNEDI3 keyboard shortcut was not listed in the settings

v0.87.1

* fixed: CPU consumption was unnecessarily high
* fixed: auto profile switching didn't fully work
* fixed: uploading was very slow, resulting in performance problems
* fixed: chroma channels were swapped when using error diffusion with NVidia
* fixed: some OpenCL crashes when using OpenCL 1.2 DLL with NVidia
* fixed: smooth motion FRC produced black image in some situations
* fixed: video mode deinterlacing was completely broken

v0.87.0

* added debanding algorithm, based on improved version of "flash3kyuu_deband"
* added file name tag "deband=off|low|medium|high"
* added automatic detection for fades from/to black or white (for debanding)
* added support for using OpenCL with NVidia, AMD and Intel GPUs
* added DXVA surface splitting via OpenCL (only AMD and Intel GPUs)
* added error diffusion algorithm (requires OpenCL)
* added NNEDI3 chroma upsampling (requires OpenCL)
* added NNEDI3 image doubling/quadrupling (requires OpenCL)
* added flexible settings profile functionality
* added file name tag "profile='profile name'"
* added IMadVRSettings2 interface to enumerate settings and manage profiles
* settings can now be edited without madVR running (only on local PC)
* madNvLevelsTweaker -> madLevelsTweaker now also works for Intel GPUs
* madVR doesn't dither, anymore, when a pixel doesn't need dithering
* added Intel driver bug workaround for "use separate device for presentation"
* added madHcNet64.dll to allow madTPG automation from 64bit calibration tools
* added API for asking madVR about the output levels (TV, PC, custom)
* fixed: full backbuffer queue slowed rendering down
* fixed: madTPG sometimes didn't update to newly requested test pattern color
* fixed: madTPG dithering produced blocking artifacts
* fixed: when upscaling exactly 2x, AR filter wasn't active for blue channel
* fixed: ArgyllCMS/HCFR disabling the 3dlut didn't work
* fixed: LAV Video Decoder sending v210 produced corrupted image
* improved frame cropping support
* improved windowproc hook stability
* a couple of very small pixel shader performance improvements
* optimized madVR default settings
* improved madVR tray icon menu looks on newer OSs
* tags now require "tag=value" or "tag:value"; "tag value" no longer accepted
* disabled automatic DCI-P3 detection through 2048 video width

相關詞條

熱門詞條

聯絡我們