《Creo 6.0從入門到精通》是2020年電子工業出版社出版的圖書，作者是肖揚、張晟瑋、萬長成。
基本介紹
- 中文名：Creo 6.0從入門到精通
- 作者：肖揚、張晟瑋、萬長成
- 出版社：電子工業出版社
- 出版時間：2020年6月
- 頁數：388 頁
- 定價：80 元
- 開本：16 開
- ISBN：9787121391033
內容簡介,圖書目錄,
內容簡介
Creo軟體是PTC公司的高端三維CAD/CAM/CAE軟體之一，本書以其最新版本Creo 6.0為基礎進行編寫，主要介紹了軟體的二維草繪、零件建模、產品裝配、二維工程圖創建、機構運動分析與仿真、結構分析與最佳化設計及NC加工等模組的功能、操作方法和在工程中的實際套用。對於每個模組，都首先介紹模組的功能和命令的使用，然後通過大量的工程設計實例示範讓讀者掌握模組的功能和操作方法。書中實例基於作者近三十年在工程設計領域中的軟體套用、教學、開發經驗，經過精心的挑選與設計，具有工程設計問題的典型性和實用性。閱讀本書，按照示範步驟一步一步地操作，就可以完成具體的設計任務，實現對軟體的快速掌握，從而可以進行常規工程產品的三維設計、分析、最佳化和製造了。本書內容全面，可作為工程技術人員掌握Creo套用技術的參考書籍，也可供高等院校工程設計、機械設計等相關專業學生學習參考。
圖書目錄
第 1 章 Creo 6.0 簡介·········································.1
1.1 Creo 6.0 概述··············································.2
1.2 Creo 6.0 的安裝··········································.4
1.3 設定 Creo 6.0 的啟動目錄 ·························.6
1.4 Creo 6.0 工作界面介紹 ······························.6
1.5 Creo 6.0 的基本操作··································.8
1.6 Creo 6.0 配置檔案簡介 ······························11
第 2 章 二維草繪···············································.16
2.1 草繪簡介與草繪的基本過程 ···················.17
2.2 草繪界面與工具的使用···························.18
2.3 草繪例一··················································.33
2.4 草繪例二··················································.38
2.5 草繪例三··················································.41
2.6 練習題······················································.43
第 3 章 拉伸類零件的建模································.45
3.1 拉伸命令簡介 ··········································.46
3.2 底座的建模 ··············································.48
3.3 底殼的建模 ··············································.55
3.4 托架的建模 ··············································.60
3.5 直齒圓柱齒輪的建模·······························.69
3.6 練習題······················································.77
第 4 章 旋轉類零件的建模································.80
4.1 旋轉命令簡介 ··········································.81
4.2 三通法蘭的建模·······································.83
4.3 階梯軸的建模 ··········································.87
4.4 V 帶輪的建模···········································.90
4.5 渦輪轉子的建模 ········································93
4.6 練習題························································96
第 5 章 掃描類零件的建模 ································.98
5.1 掃描命令簡介 ············································99
5.2 錐形簧的建模 ··········································102
5.3 異形彎管的建模 ······································104
5.4 變截面零件的建模···································106
5.5 圓柱凸輪的建模 ······································108
5.6 練習題······················································112
第 6 章 螺旋掃描類零件的建模·························115
6.1 螺旋掃描命令簡介···································116
6.2 絲槓的建模··············································117
6.3 雙頭六角螺栓的建模·······························120
6.4 變節距葉片螺旋桿的建模·······················124
6.5 麻花鑽的建模 ··········································126
6.6 練習題······················································130
第 7 章 混合類特徵的建模 ······························.131
7.1 混合特徵命令簡介···································132
7.2 旋轉混合命令簡介···································135
7.3 花瓶的建模··············································136
7.4 通風管道的建模 ······································138
7.5 軍號的建模··············································142
7.6 圓柱銑刀的建模 ······································149
7.7 練習題······················································151
第 8 章 掃描混合類零件的建模·······················.153
8.1 掃描混合命令簡介···································154
8.2 吊鉤的建模··············································155
8.3 陶瓷壺的建模··········································159
8.4 傘齒輪的建模··········································163
8.5 練習題······················································169
第 9 章 曲面類零件的建模································170
9.1 曲面生成命令簡介 ··································171
9.2 飲料瓶的建模··········································177
9.3 電熨斗的建模··········································185
9.4 葉輪的建模··············································191
9.5 輪胎的建模··············································197
9.6 練習題······················································201
第 10 章 模型的測量與分析······························203
10.1 模型的測量與分析命令簡介·················204
10.2 常規測量························································205
10.3 質量屬性測量················································212
10.4 練習題····················································213
第 11 章 產品裝配·············································214
11.1 裝配功能簡介 ········································215
11.2 軸承座的裝配 ········································220
11.3 二級減速器的裝配·································227
11.4 練習題····················································240
第 12 章 二維工程圖的創建······························241
12.1 工程圖工作界面及創建過程介紹 ·········242
12.2 視圖創建實例 ········································244
12.2.1 軸零件的工程圖創建 ·····················244
12.2.2 托架零件的工程圖創建 ·················252
12.2.3 基座零件的工程圖創建 ·················258
12.3 工程圖示注實例 ····································264
12.4 裝配圖模板的創建與套用實例 ·············272
12.5 部件裝配圖生成實例·····························276
12.6 工程圖的列印輸出 ································282
12.7 練習題····················································283
第 13 章 模型渲染 ············································284
13.1 Render Studio 介紹·································285
13.2 實時渲染對象 ········································288
13.3 練習題···················································.292
第 14 章 機構運動分析與仿真··························293
14.1 機構模組概述·······································.294
14.2 機構連線方式介紹 ·····························.295
14.3 齒輪機構的運動分析與仿真 ···························.298
14.4 間歇槽輪機構的運動分析與仿真····················.306
14.5 曲柄連桿機構的運動分析與仿真····················.311
14.6 練習題···················································.314
第 15 章 結構分析與最佳化設計··························315
15.1 結構分析模組簡介 ·······························.316
15.2 建立結構分析模型 ·······························.318
15.2.1 簡化模型 ·······································.318
15.2.2 定義材料 ·······································.318
15.2.3 創建約束 ·······································.321
15.2.4 創建載荷集 ···································.323
15.2.5 創建載荷 ·······································.324
15.2.6 格線劃分 ·······································.326
15.2.7 建立結構分析模型實例 ················.327
15.3 建立結構分析·······································.331
15.3.1 靜態分析 ·······································.331
15.3.2 模態分析 ·······································.334
15.3.3 疲勞分析 ·······································.335
15.3.4 建立結構分析實例························.338
15.4 設計研究···············································.340
15.4.1 標準設計研究································.340
15.4.2 敏感度設計研究····························.341
15.4.3 最佳化設計研究································.342
15.4.4 設計研究實例································.344
15.5 練習題···················································.347
第 16 章 NC 加工··············································349
16.1 NC 加工簡介 ········································.350
16.2 使用工藝管理器···································.353
16.3 創建製造工藝·······································.357
16.4 創建 NC 序列 ·······································.360
16.5 使用刀具位置數據和顯示刀具路徑 ····.364
16.6 多工藝加工實例···································.366
16.7 練習題···················································.382
