閔峻英

閔峻英，男，博士，同濟大學教授、博士生導師。

基本介紹

• 中文名：閔峻英
• 畢業院校：同濟大學
• 學位/學歷：博士
• 職業：教師
• 專業方向：汽車輕量化與先進成形製造技術
• 就職院校：同濟大學

研究方向

汽車輕量化與先進成形製造技術

個人經歷

教育背景

2009.03 – 2012.12，博士學位，同濟大學，機械製造及其自動化

2011.01 – 2011.07，訪問學者（博士生實習研究），美國通用汽車全球研發中心

2007.09 – 2009.03，碩士（轉提前攻博），同濟大學，機械製造及其自動化

2003.09 – 2007.07，學士學位，同濟大學，機械設計製造及其自動化

工作履歷

2017.06至今， 教授，同濟大學

2017.03 – 2017.05，特聘研究員，同濟大學

2015.01 – 2017.02，洪堡學者，德國波鴻魯爾大學

2013.08 – 2014.12，訪問學者（博士後研究），美國密西根大學

2013.03 – 2014.12，兼職訪問學者（博士後研究），美國通用汽車全球研發中心

2013.02 – 2013.08，博士後，美國夏威夷大學

學術兼職

（1）國際生產工程學會CIRP青年會員（Research Affiliate）；

（2）Automotive Innovation（汽車工程英文版）期刊編委；

（3）2017年“Sustainable Materials Processing and Manufacturing”國際會議組委會成員；

（4）“New Challenges in Processing and Modeling of Lightweight Metals”中德研討會組委會成員（秘書）；

（5）International Journal of Mechanical Sciences, Materials Science and Engineering A, Materials & Design等10餘種SCI國際期刊及多個先進制造領域國際學術會議評審專家。

（6）同濟大學中德人文交流研究中心，研究員

學術成果

研究領域

（1）智慧型製造技術及裝備；

（2）輕量化材料成形技術；

（3）異種材料連線技術；

（4）先進力學實驗方法與套用力學；

（5）輕量化設計

在研項目

[1] “薄壁結構件的智慧型成形製造技術研究”，同濟大學引進人才項目，項目負責人；

[2] “Heat-assisted incremental sheet forming”, 洪堡基金會，2015年至2017年，項目負責人；

[3] “Validation of Constitutive Theories”，美國通用汽車全球研發中心資助項目，2016年至2018年，共同負責人；

[4] “Friction Stir Blind Riveting for Dissimilar Materials”, 美國國家自然科學基金，2014年至2017年，主要參與者；

論文

截至2017年5月已出版專著1部，發表論文60餘篇，其中SCI期刊論文36篇（JCR一區論文18篇），申請發明專利3項，在國際會議上做報告20餘次。

（摘選部分）

[1] Min J, Stoughton TB, Carsley JE, Carlson BE, Lin J, Gao X. Accurate Characterization of Biaxial Stress-Strain Response of Sheet Metal from Bulge Testing. International Journal of Plasticity, 2016,

[2] Min J, Hector LGJr, Lin J, Carter JT, Sachdev AK. Spatio-temporal characteristics of propagative plastic instabilities in a rare earth containing magnesium alloy. International Journal of Plasticity, 2014,

[3] Min J, Stoughton TB, Carsley JE, Lin J. A Method of Detecting the Onset of Localized Necking Based on Surface Geometry Measurements. Experimental Mechanics. 2017,

[4] Min J, Stoughton TB, Carsley JE, Lin J. An improved curvature method of detecting the onset of localized necking in Marciniak tests and its extension to Nakazima tests. International Journal of Mechanical Sciences, 2017,

[5] Min J, Carsley JE, Lin J, Wen Y, Kuhlenkötter B. A non-quadratic constitutive model under non-associated flow rule of sheet metals with anisotropic hardening: modeling and experimental validation. International Journal of Mechanical Sciences, 2016,

[6] Min J, Stoughton TB, Carsley JE, Lin J. Compensation for process-dependent effects in the determination of localized necking limits. International Journal of Mechanical Sciences, 2016,

[7] Min J, Hector LGJr, Zhang L, Sun L, Carsley JE, Lin J. Plastic instability at elevated temperatures in a TRIP-assisted steel. Materials and Design. 2016,

[8] Min J, Li J, Li Y, Carlson BE, Lin J. Affected Zones in an Aluminum Alloy Frictionally Penetrated by a Blind Rivet. ASME Journal of Manufacturing Science and Engineering, 2016,

[9] Min J, Hector LGJr, Zhang L, Lin J, Carsley JE, Sun L. Elevated-temperature mechanical stability and transformation behavior of retained austenite in a quenching and partitioning steel. Materials Science and Engineering: A, 2016,

[10] Zhang L, Lin J, Min J, Ye Y, Kang L. Formability Evaluation of Sheet Metals Based on Global Strain Distribution. Journal of Materials Engineering and Performance, 2016,

[11] Zhang L, Min J, Wang B, Lin J, Li F, Liu J. Constitutive model of friction stir weld with consideration of its inhomogeneous mechanical properties. Chinese Journal of Mechanical Engineering (English Version), 2016,

[12] Gao X, Min J, Zhang L, Li Q, Lian C, Lin J. Forming Limit Curve of a Quenching and Partitioning Steel: Prediction and Experimental Validation. Journal of Iron and Steel Research, International, 2016,

[13] Min J, Seim P, Störkle D, Thyssen L, Kuhlenkötter B. Thermal modeling in electricity assisted incremental sheet forming. International Journal of Material Forming, 2016,

[14] Min J, Li YQ, Carlson BE, Hu SJ, Li J, Lin J. A new single-sided blind riveting method for joining of dissimilar materials. CIRP Annals - Manufacturing Technology, 2015,

[15] Min J, Li Y, Li J, Carlson BE, Lin J. Mechanics in Frictional Penetration with a Blind Rivet. Journal of Materials Processing Technology, 2015,

[16] Min J, Li J, Li Y, Carlson BE, Lin J, Wang W. Friction stir blind riveting for aluminum alloy sheets. Journal of Materials Processing Technology, 2015,

[17] Min J, Li J, Carlson BE, Li Y, Quinn JF, Lin JP, Wang WM. Friction Stir Blind Riveting for Joining Dissimilar Cast Mg AM60 and Al Alloy Sheets. ASME Journal of Manufacturing Science and Engineering, 2015,

[18] Min J, Li Y, Li J, Carlson BE, Lin J. Friction stir blind riveting of carbon fiber-reinforced polymer composite and aluminum alloy sheets. International Journal of Advanced Manufacturing Technology, 2015,

[19] Min J, Hector L G Jr, Carsley J E, Stoughton T B, Carlson B E, Lin J P. Spatio-temporal characteristics of plastic instability in AA5182-O during biaxial deformation. Materials and Design, 2015,

[20] Min J, Lin J, Sun B. Effect of strain rate on spatio-temporal behavior of Portevin-Le Chastener bands in a twinning induced plasticity steel. Mechanics of Materials, 2014,

[21] Min J, Lin J. Anelastic behavior and phenomenological modeling of Mg ZEK100-O alloy sheet under cyclic tensile loading-unloading. Materials Science and Engineering A, 2013,

[22] Min J, Hector LGJr, Lin J, Carter JT. Analytical Method for Forming Limit Diagram Prediction with Application to a Magnesium ZEK100-O Alloy. Journal of Materials Engineering and Performance, 2013,

[23] Ding L, Lin J, Min J, Pang Z, Ye Y. Necking of Q&P steel during uniaxial tensile test with the aid of DIC technique. Chinese Journal of Mechanical Engineering (English Version), 2013,

[24] Min J, Seim P, Störkle D, Thyssen L, Kuhlenkötter B. Electrically-Assisted Incremental Sheet Forming of Advanced High Strength Steels. Procedia Manufacturing, 2016,

[25] Min J, Lin J, Li J. Forming limits of Mg alloy ZEK100 sheet in preform annealing process. Materials and Design, 2014,

[26] Min J, Lin J, Min Y. Effect of thermo-mechanical process on the microstructure and secondary-deformation behavior of 22MnB5 steels. Journal of Materials Processing Technology, 2013,

[27] Lin J, Hua D, Wang P, Lu Z, Min J. Effect of thermal exposure on the strength of adhesive-bonded low carbon steel. International Journal of Adhesion and Adhesives, 2013,

[28] Min J, Lin J, Min Y, Li F. On the ferrite and bainite transformation in isothermally deformed 22MnB5 steels. Materials Science and Engineering A, 2012,

[29] Min J, Lin J, Xin L. Non-isothermal Deformation and Phase Transformation of 22MnB5 Steel at Elevated Temperatures. Steel Research International, 2012,

[30] Min J, Lin J, Xin L, Li J, Ding L. Effect of Pre-Deformation at Elevated Temperatures on the Microstructure and Hardness of Boron Steel 22MnB5. Journal of Iron and Steel Research, International, 2011,

[31] Xin L, Min J, Lin J, Feng Q. Investigation on the Failure Mechanism of DP590-22MnB5(quenched) and DP590-DP590 Spot-welding Joints. Journal of Iron and Steel Research, International, 2011,

[32] Lin J, Min J, Ye Y, Xin L, Ding L. Investigation on the Mechanical Properties at Room Temperature of Q&P Steel Sheet with Ultrahigh Strength. Journal of Iron and Steel Research, International, 2011,

[33] Min J, Lin J, Cao Y, Bao W, Lu Z. Effect of necking types of sheet metal on the left-hand side of forming limit diagram. Journal of Materials Processing Technology, 2010,

[34] Min J, Lin J, Li J, Bao W. Investigation on hot forming limits of high strength steel 22MnB5. Computational Materials Science, 2010,

[35] Min J, Lin J, Tian H, Sun G, Xu Z. Investigation on uniaxial tensile instability of USIBOR1500 steel sheets at elevated temperatures. Chinese Journal of Mechanical Engineering (English Version), 2010,

榮譽獎項

2015年上海市研究生優秀成果（優秀博士學位論文）

2014年洪堡基金會研究獎學金

2014年上銀優秀機械博士論文獎