趙興科，北京科技大學副教授，研究領域為焊接、功能材料與器件、生物醫用材料與器件。
基本介紹
- 中文名：趙興科
- 國籍：中國
- 民族：漢族
- 出生日期：1966.9
- 職業：副教授/碩導
- 專業領域：材料科學與工程
人物經歷,教育背景,工作經歷,研究方向,主要貢獻,
人物經歷
教育背景
2003.02 — 2005.02，中國科學院上海套用物理研究所，博士後；
1999.09 — 2002.09，哈爾濱工業大學材料科學與工程學院，研究生，工學博士；
1990.09 — 1993.06，中國科學院瀋陽金屬研究所，研究生，工學碩士；
1984.09 — 1988.09，華南理工大學機械工程二系，本科，工學學士。
工作經歷
2005.3——，北京科技大學材料學院，副教授；
1993.6 — 1999.9，哈爾濱工業大學（威海）機械系，講師、副教授；
1988.6 — 1990.9，濟南煤氣用具總廠，助工、工程師。
研究方向
材料科學與工程。
主要貢獻
已發表學術論文100餘篇。
外文：
Hongbo Sun, Xingke Zhao, Lan Lan, Jihua Huang, Hua Zhang. Preparation of high-porosity NiTi alloys by powder sintering with NaCl pre-forming. Advanced Materials Research. Vols. 152-153 (2011) pp 1342-1345Z. P. Wang, J. H. Huang, H. Zhang,X. K. Zhao. Reactive composite brazing of Cf/SiC composites to Ti alloy with (Ag−6Al) +Ti+C composite filler materials. Materials Science and Technology. 10.1179/174328409X418955Xingke Zhao, Lan Lan, Hongbo Sun, Jihua Huang, Hua Zhang. Preparation of NiTi/NiTiNb Laminated Alloys by Vacuum Brazing. Advanced Materials Research. Vols. 97-101 (2010) pp 1653-1656Xingke Zhao, Lan Lan, Hongbo Sun, Jihua Huang, Hua Zhang. Mechanical properties of additive laser welded NiTi alloy. Materials Letters. 64 (2010) 628–631X. K. Zhao, L. Lan, W. Wang, L. Chen, F. J. Liu, J. H. Huang and H. Zhang. Martensitic transformation behaviour of non-equilibrium heat treated Ni50.9Ti49.1 alloys. Materials Science and Technology. 2009, (Appeared or available online: 2009?12?4?) DOI: DOI 10.1179/026708309X12578491814753J. H. Xiong, J. H. Huang, Z. P. Wang, Y. H. Ban, H. Zhang, X. K. Zhao. Brazing of carbon fibre reinforced SiC composite and Ti alloy using Cu-Ti-C filler materials. Materials Science and Technology. DOI: 10.1179/174328408X393440H. T. Wang, S. Q. Zhang, J. H. Huang, J. L. Zhu, H. Zhang, X. K. Zhao. Fabrication of TiC-Fe cermet coating by plasma spraying of Fe-Ti-C powder using sucrose as carbon source. Materials Science and Technology. DOI: 10.1179/174328409X448466D. H. Cheng, J. H. Huang, H. Zhang, X. K. Zhao. Superplastic deformation of laser welded Ti-6Al-4V sheet. Materials Science and Technology. 2009, (Appeared or available online: 2009?8?26?) DOI: 10.1179/026708309X12468927349217J. Xiong, J. Huang, Z. Wang, G. Lin, H. Zhang and X. Zhao. Joining of Cf/SiC composite to Ti alloy using composite filler materials. Materials Science and Technology 2009, 25(8): 1046-1051Xingke Zhao, Hongbo Sun, Lan Lan, Jihua Huang, Hua Zhang, Yu Wang. Pore structures of high-porosity NiTi alloys made from elemental powders with NaCl temporary space-holders. Materials Letters 63 (2009) 2402-2404Xingke Zhao, Jiawei Tang, Lan Lan, Jihua Huang, Hua Zhang, Yu Wang. Vacuum brazing of NiTi alloy by AgCu eutectic filler. Materials Science and Technology. 2009, 25(12):1495-1497Xingke Zhao, Wei Wang, Li Chen, Fangjun Liu, Geng Chen, Jihua Huang, Hua Zhang. Two-stage superelasticity of a Ce-added laser-welded TiNi alloy. Materials Letters. 2008, 62: 3539-3541[EI]Xingke Zhao, Wei Wang, Li Chen, Fangjun Liu, Jihua Huang, Hua Zhang. Microstructures of cerium added laser weld of a TiNi alloy. Materials Letters. 2007, 62(10-11): 1551-1553[EI]Jinglei Zhu, Jihua Huang, Haitao Wang, Shouquan Zhang, Hua Zhang, Xingke Zhao. Microstructure and properties of TiC-Fe36Ni cermet coatings by reactive plasma spraying using sucrose as carbonaceous precursor. Applied Surface Science.254(2008) ，20：6687–6692 [EI]Lihua Qi, Jihua Huang, Xingke Zhao, Hua Zhang. Effect of thermal-shearing cycling on Ag3Sn microstructural coarsening in SnAgCu solder. Journal of Alloys and Compounds 469 (2009) 1-2：102–107[EI]L. H. Qi, J. H. Huang, X. K. Zhao and H. Zhang. Microstructure transformation of Sn base solders under isothermal aging and thermal shearing cycling conditions. Materials Science and Technology 2008 VOL 24 NO 10, 1254-1258JingLei Zhu, JiHua Huang, HaiTao Wang, JunLong Xu, Xingke Zhao, Hua Zhang. In-situ synthesis and microstructure of TiC-Fe36Ni composite coatings by reactive detonation-gun spraying. Materials Letters. 2008, 62 (12-13): 2009–2012[EI]Huang, Jihua; Wan, Yun; Zhang, Hua; Zhao, Xingke. TLP bonding of SiCp/2618Al compositesusing mixed Al-Ag-Cu system powders as interlayers. Journal of Materials Science 2007, 42(23): 9746-9749. [EI]Ji-hua Huang, Yue-ling Dong, Yun Wan, Xing-ke Zhao and Hua Zhang, “Investigation on reactive diffusion bonding of SiCp/6063 MMC by using mixed powders as interlayers”, Journal of Materials Processing Technology, 2007, 190(1-3): 312-316 (23 July 2007) Jihua Huang，Yun Wan, Hua Zhang, Xingke Zhao. Effect of Ti on TLP Bonding of SiCp/2618 Al Composites using Interlayers of Mixed Al-Ag-Cu System Powders. Materials Science and Technology. 2007,Volume 23, Number, pp.87-91Guobiao Lin, Jihua Huang, Huang Zhang, Xingke Zhao,Joints of Cf/SiC Composite to Ti-Alloy with In-Situ Synthesized TiCx Improved Brazing Layers,Materials Transactions, 2006,47(4):1261-1263(SCI、EI)G. B. Lin，J. H. Huang, H.Zhang and X. K.Zhao. Microstructure and mechanical performance of brazed joints of Cf/SiC composite and Ti alloy using Ag–Cu–Ti–W. Science and Technology of Welding and Joining. 2006 ,VOL 11 , NO 4 : 379-383Xingke Zhao, Wenxin Li. Morphology and hydrophobicity of a polyurethane film molded on a porous anodic alumina template. Surface & Coatings Technology. 200(2006): 3492~3495 (SCI、EI)Lin,G.B., Huang,J.H., Zhuang,H., Zhao,X.K. Brazed joints of Cf-SiC composite to Ti alloy using Ag-Cu-Ti-(Ti+C) mixed powder as interlayer. Powder Metallurgy. 2006, 49(4): 345-348Zhao Xingke, Gao Zhiyong, Cai Wei, Zhao Liancheng. Microstructure of Phosphorus Ion-Implanted TiNi alloy. Journal of Materials Science. Vol. 40, no. 19, Oct. 2005, pp. 5291-5293(SCI、EI)Gao zhiyong, Zhao Xingke, Chen Feng, Cai Wei, Zhao Licancheng, Wu Guangheng, Chen Jinglan, Zhan Wenshan. Effect of annealing and thermal cycling on phase transformation behaviour of Ni-Mn-Ga alloy. Materials Science and Technology. 2003, 19(6): 691~694(SCI、EI) Li ZC, Zhao XK, Zhang H. Microstructure and superelasticity of severely deformed TiNi alloy，Mater. Lett., 57 (2003) 1086 (SCI) X.K. Zhao, W. Cai, Y. Tian and L.C. Zhao. Microstructure and Hemocompatibility of a Phosphorus Ion-implanted TiNi Shape Memory Alloy. Materials Science Forum. 2002, 394-395: 153~156(SCI、EI) X.K. Zhao, W. Cai, L.C. Zhao. Corrosion Behavior of Phosphorus Ion-PBII Treated Ni50.6Ti49.4 Shape Memory Alloys. Surface and Coating Technology. 155(2002):236~238(SCI、EI) Wei Wang, Xingke Zhao, Jihua Huang. Laser welding of TiNi shape memory alloy. Proceedings of 3 Pacific International Conference on Application of Lasers and Optics (PICALO), April, 2008, Beijing: 112-115Lihua Qi, Jihua Huang, Hua Li, Xingke Zhao, Hua Zhang. Microstructures transformation in Sn-base solders under the isothermal and thermal-shearing cycling condition. 2006 7th International Conference on Electronic Packaging Technology. (IEEE Cat No. 06EX1520C), 2006, p 5 p (EI)Lihua Qi, Jihua Huang, Hua Li, Xingke Zhao, Hua Zhang. Growth behavior of IMCs and fracture forming mechanism at Sn-Ag-Cu/Cu interfaces under thermal-shearing cycling condition. 2006 7th International Conference on Electronic Packaging Technology. (IEEE Cat No. 06EX1520C), 2006, p 5 pp. (EI)Lihua Qi, Jihua Huang, Xingke Zhao, Hua Zhang. Effect of thermal-shearing induced microstructural coarsening on SnAgCu microelectronic solder. ICEPT2007. Proceedings of the Electronic Packaging Technology Conference, EPTC, 2007, Proceedings of the 2007 8th International Conference on Electronic Packaging Technology, ICEPT[EI]Lihua, Qi; Jihua, Huang; Hua, Li; Xingke, Zhao; Hua, Zhang Microstructures transformation in Sn-base solders under the isothermal and thermal-shearing cycling condition. Source: 2006 7th International Conference on Electronics Packaging Technology, ICEPT '06, 2007, 2006 7th International Conference on Electronics Packaging Technology, ICEPT '06[EI]Qi, Lihua; Huang, Jihua; Zhao, Xingke; Zhang, Hua. Microstructural transformation on snagcu/cu interface induced by thermal-shearing cycling. Source: 10th Electronics Packaging Technology Conference, EPTC 2008, p 499-505, 2008, 10th Electronics Packaging Technology Conference, EPTC 2008[EI]
中文：
Microstructure and mechanical properties of Ti-6AL-4V joints by laser beam welding
Yang Jing(Univ. of Sci. & Technol. Beijing, Beijing, China); Cheng Donghai; Huang Jihua; Zhang Hua; Zhao Xingke; Guo HepingSource:Rare Metal Materials and Engineering, v 38, n 2, p 259-62, Feb. 2009 Language: Chinese
Database: Inspec
Abstract - DetailedResearch on microstructure and formation characteristic of laser welded lap joints of TC4 titanium alloy
Cheng Donghai(Univ. of Sci. & Technol. Beijing, Beijing, China); Huang Jihua; Yang Jing; Zhao Xingke; Guo HepingSource:Rare Metal Materials and Engineering, v 38, n 2, p 255-8, Feb. 2009 Language: Chinese
Database: Inspec
Abstract - DetailedMicrostructure of reactive composite brazing joints of Cf/SiC composite to Ti-6Al-4V alloy with Cu-Ti-C filler material
Ban Yonghua(Univ. of Sci. & Technol. Beijing, Beijing, China); Huang Jihua; Zhang Hua; Zhao Xingke; Zhang zhiyuanSource:Rare Metal Materials and Engineering, v 38, n 4, p 713-16, April 2009 Language: Chinese
Database: Inspec
Abstract - DetailedZhao, Xingke; Wu, Ping; Zhou, Yusheng. Influence of RE elements on steel weld microstructure. Rejiagong Gongyi/Hot Working Technology, n 5, July 20, 1997, p 6-8 Language: Chinese (EI)Zhao Xingke, Wang Zhong; Cai Wei; Zhao Liancheng. Corrosion resistance of a NiTi alloy in 1% NaCl saline solution. Corrosion Science and Protection Technology, v 13, n 1, Jan. 2001, p 21-3 Language: Chinese (EI)Wang, Wei; Chen, Li; Zhao, Xingke; Huang, Jihua; Li, Hongguang; Dong, Xingwen. Effect of laser welding of preset rare earth to the welded joint on the functional properties of the Ti-50.9at% ni shape memory alloy. Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering, v 37, n 10, p 1819-1823, October 2008 Language: Chinese[EI]熊進輝;黃繼華;張華;趙興科;.C_f/SiC複合材料與鈦合金Ag-Cu-Ti-C_f複合釺焊[J]焊接學報.2010,(05)2010-05-25薛行雁;熊進輝;黃繼華;張華;趙興科;王志平;.AgAlTi-C釺焊C_f/SiC複合材料與TC4接頭組織結構[J]材料工程.2010,(05)程東海;黃繼華;林海凡;趙興科;張華;.鈦合金雷射焊縫的超塑性變形行為及顯微組織[J]中國有色金屬學報.2010,(01)史留勇;劉義敏;張守全;黃繼華;趙興科;張華;.燒結工藝對脫β層梯度硬質合金梯度結構的影響[J]北京科技大學學報.2011,(04)，2011-04-28 15:21史留勇;劉義敏;張守全;黃繼華;張華;趙興科;.脫β層梯度硬質合金的製備及組織結構[J]粉末冶金材料科學與工程.2011,(01)2011-02-15馬柯;陳樹海;黃繼華;夏軍;張華;趙興科;.不鏽鋼/鋁合金雷射深熔焊接頭微觀組織與力學性能[J]套用雷射.2010,(06)2010-12-15陳樹海;馬柯;黃繼華;夏軍;張華;趙興科;.鋼/鋁異種金屬雙熔池TIG熔釺焊接頭的顯微組織與力學性能[J]中國有色金屬學報.2011,(12)2011-12-15周國棟;陳樹海;黃繼華;趙興科;張華;.熱傳導對雙陶瓷熱障塗層隔熱效果影響研究[J]材料科學與工藝.2012,(02) 2012-04-15史留勇;劉義敏;張守全;黃繼華;趙興科;張華.燒結工藝對脫茁層梯度硬質合金梯度結構的影響[J]北京科技大學學報.2012,(10)2011-04-15唐家偉; 謝淑蘭; 趙興科;Ag-28Cu釺焊TiNiSMA接頭的微觀組織特徵，熱噴塗技術, Thermal Spray Technology, 編輯部信箱2010年04期 67-72趙興科, 唐佳偉, 黃繼華, 張華. NiTi/NiTiNb複合板的釺焊製備與性能. 焊接學報. 2010, 31(6): 73-76吳廣森; 靳安民; 馬遠征; 陳興; 趙興科.一種新型寰樞椎復位內固定器的設計及解剖學依據. 中國臨床解剖學雜誌. 2008, 6: 629-632陳庚，趙興科，陳俐，王蔚，黃繼華，張華. TININB合金雷射焊接接頭的組織與性能. 熱加工工藝，2008，37（17）：99~101王海濤, 黃繼華, 朱警雷, 張華, 趙興科. 反應等離子噴塗TiC/Fe-Ni複合塗層及其耐沖蝕性能. 複合材料學報. 2009-2-15,26(1):74-79[Ei]王蔚，陳俐，趙興科，黃繼華，陳庚。預置填充稀土雷射焊接對TiNi形狀記憶合金微觀組織及成分的影響，稀有金屬材料與工程，2008，37(11)：1942-1946[SCi0002699900013EI20084711727323]王蔚，陳俐，趙興科，黃繼華. 預置填充稀土雷射焊接對TiNi形狀記憶合金功能性的影響，稀有金屬材料與工程，2008，37(10)：819-1923[SCi000257378300022EI20084711727323]王蔚，趙興科，黃繼華，陳俐. 雷射焊接技術中的研究進展.·航空製造技術2007年增刊. 40-45王蔚; 陳庚; 趙興科; 黃繼華; 陳俐. 形狀記憶合金YAG雷射焊接. 套用雷射. 2008, 3：199~202 王蔚，趙興科，黃繼華，陳俐. 雷射焊接工藝參數對NiTi形狀記憶合金焊縫成形的影響. 中國雷射. 2008, 35(2): 291-296[EI]張強; 王海濤; 黃繼華; 趙興科; 張華. 反應等離子噴塗TiC陶瓷增強金屬複合塗層組織性能. 中國表面工程. 32-36 孫占; 黃繼華; 張華; 趙興科; 李曲全. 微合金EH40型船板鋼大熱輸入焊接接頭組織和力學性能. 焊接學報, 2008, 29(3): 41-44[EI]楊靜，程東海，黃繼華，張華，趙興科，孫占. TC4合金雷射焊接工藝參數與接頭組織性能研究. 熱加工工藝. 2007, 36(23): 15-18王志平,黃繼華, 班永華,熊進輝,張華,趙興科. 反應複合釺焊Cf-SiC/Cu-Ti-C/TC4接頭組織結構. 材料功程。2008-9-20田亮，黃繼華，張志遠，趙興科，張華。用Ti50Cu+W釺料連線Si/SiC復相陶瓷與殷鋼的研究。材料工程，2008-9-20朱警雷，黃繼華，張華，趙興科，齊立華. 硬質合金複合輥環複合工藝的研究進展. 粉末冶金技術. 2008, 26(1): 60-64朱警雷; 黃繼華; 張華; 趙興科. 硬質合金與鋼異種金屬焊接的研究進展. 焊接，2008，2: 15-19 朱警雷，黃繼華，王海濤，徐俊龍，張華，趙興科. 反應爆炸噴塗製備TiC/Fe-Ni 金屬陶瓷複合塗層. 稀有金屬材料與工程. 2008-07-15,37(7):1313-1316[EI]朱警雷，黃繼華，王海濤，徐俊龍，趙興科，張華. 反應等離子噴塗TiC/Fe-Ni 金屬陶瓷複合塗層的顯微組織. 中國有色金屬學報. 2008, 18(1): 36-41趙華濤，黃繼華，張華，趙興科，舒大禹. 用Cu-Ti 釺料對Si/SiC 陶瓷與低膨脹鈦合金的釺焊. 稀有金屬材料與工程. 2007, 36(12): 2184-2188[EI]李群，黃繼華，張華，趙興科，齊麗華. Al對Sn-58Bi無鉛釺料組織及性能的影響. 電子工藝技術. 2008, 29(1): 1-4齊麗華，黃繼華, 趙興科, 張華. 熱—剪下循環條件下Sn3.5Ag0.5CuNi界面化合物生長行為. 焊接學報. 2007, 28(12): 61-64[EI]徐俊龍，黃繼華，魏世忠，王海濤，張華，趙興科. TiC/Fe-Ni金屬陶瓷複合塗層反應等離子噴塗研究.稀有金屬材料與工程. 2007, 36(suppl3):688-691趙興科，周旭東，周香平，黃繼華，張華. 採用TiZrCuNi擴散釺焊TiNi形狀記憶合金. 中國科技論文線上, 2007. 孫占，張華，黃繼華，趙興科，李曲全，楊靜. 新型EH40船板鋼大熱輸入量埋弧焊焊接接頭組織性能研究. 熱加工工藝，2007，36（19）：15-17舒大禹，黃繼華，萬雲，趙華濤，張華，趙興科. Ti對Al-Ag-Cu反應擴散連線SiCp/2618Al複合材料接頭組織及力學性能的影響. 中國科技論文線上. 2007劉慧淵，黃繼華，魏世忠，張華，趙興科. 反應火焰噴塗Ti-Ni-C系陶瓷/金屬複合塗層，航空材料學報，2007，Vol.27，No.1, 23-27 趙祖德，許振華，黃繼華，魏世忠，趙興科，張華，Ti的添加方式對反應釺塗碳化物/鐵基合金複合塗層組織結構的影響. 航空材料學報，2007，Vol.27，No.4，42-45齊麗華，黃繼華，張建綱，王燁，張華，趙興科，SnAgCu/Cu和SnPb/Cu界面熱剪下循環條件下化合物的生長行為，中國有色金屬學報，2006, Vol.16，No.10, 1705-1709張建綱，黃繼華，戴志鋒，張華，趙興科. 含稀土Sn-Zn-Bi系無鉛釺料潤濕性能的研究. 中國稀土學報. 2006, 24(5): 586~591劉均波，劉均海，黃繼華, 張華, 趙興科. 粘結相對原位合成TiC鋼結硬質合金組織結構和性能的影響. 粉末冶金技術. 2007.25(4):266-270宋桂香，劉均海，黃繼華，張華, 趙興科.TiC/Cr18Ni8鋼結硬質合金原位反應合成研究. 材料科學與工藝. 2007，15(2):255-259齊麗華，黃繼華，張華，趙興科. 熱-剪下循環條件下Sn-3.5Ag-0.5Cu/Cu(Ni)界面化合物生長行為研究. 稀有金屬材料與工程. 2007，36（2）：241-244趙華濤, 黃繼華，張華，趙興科，舒大禹. Si/SiC陶瓷與低膨脹鈦合金釺焊接頭的界面結構及連線強度. 中國科技論文線上. 2006 趙興科, 蔡偉, 趙連城. 磷離子注入TiNi合金的放射特性. 生物醫學工程學雜誌. 2003, 20(3): 412~414趙興科, 王中, 蔡偉, 趙連城. 一種NiTi合金耐蝕性能的正交試驗研究. 腐蝕科學與防護技術. 2001, 13(1):21~23趙興科, 王中, 鄭玉峰, 趙連城. 拋光技術的現狀. 表面技術. 2000, 29(2): 6~7趙興科, 王中, 蔡偉, 趙連城. TiNi 合金化學拋光工藝及其對耐蝕性的影響. 材料保護. 2001, 34(1): 30~31[ZHAO Xing-ke et al. Chemical polishing technique and its effects on corrosion resistance of TiNi alloy. Cailiao Baohu. 2001, 34(1):30~31(Ch) ]趙興科, 蔡偉, 趙連城. 離子注磷TiNi合金的表面成與相組成. 2001, 功能材料，增刊：1628~1629趙興科, 王中, 鄭玉峰, 趙連城. TiNi合金粉末燒結與燃燒合成工藝. 粉末冶金技術. 2000, 18(3): 214~216Zhao, Xingke; Wu, Ping; Zhou, Yusheng.Influence of RE elements on steel weld microstructure. Source:Rejiagong Gongyi/Hot Working Technology, n 5, p 6-8, July 20 Language: Chinese[EI]趙興科, 吳平. 稀土對高釩鑄鐵焊條性能的影響. 稀土. 2000, 21(2):40~42趙興科, 吳平. 稀土高釩鑄鐵焊條的研製. 熱加工工藝. 1999, 1:31~32周玉生, 趙興科, 閻久春, 楊士勤. 新型微束等離子弧焊接電源的研製. 材料科學與工藝,1999,7(Sup.): 45~48趙興科. 簡便實用的鋁合金釺焊工藝. 熱加工工藝. 1998, 2:53~54趙興科, 周玉生, 吳平. 新型稀土鋼焊條. 稀土. 1997, 18(1): 29~32趙興科, 畢亞艷, 田野, 蔡偉, 黃永麟, 趙連城. 放射性TiNi合金支架的研製與動物實驗研究. 2002年材料科學與工程新進展(上). 中國材料研究學會, 北京:446~449 趙興科, 吳平. 高釩鑄鐵焊條添加稀土的試驗研究. 第九次全國焊接會議論文集. 1: 460~462 張華;趙衍華;張寬;黃繼華;趙興科;陳樹海;.2A97鋁鋰合金攪拌摩擦焊研究[A].第十六次全國焊接學術會議論文摘要集.2011-10-20陳樹海;黃繼華;馬柯;夏軍;張華;趙興科;.Ni箔中間層對不鏽鋼/鋁合金雷射深熔焊的影響[A].第十六次全國焊接學術會議論文摘要集.2011-10-20胡杰;姜志忠;黃繼華;陳樹海;趙興科;張華;.聚變堆用CLAM鋼電子束焊縫顯微組織構成與形成機理[A].第十六次全國焊接學術會議論文摘要集.2011-10-20
發明專利
[1]趙興科;羅俞華;黃繼華;張華.多孔鈦鎳合金的微波激發自蔓燃合成方法[P].CN200710175922.6.北京科技大學.2008-03-12；
[2]趙興科;陳庚;王蔚;黃繼華;張華.一種寬溫相變鎳鈦合金的熱擴散製備方法[P].CN200810102524.6.北京科技大學.2008-08-20；
[3]趙興科;羅俞華;顧偉;黃繼華;張華.一種鎳鈦記憶合金海綿及其混鹽壓坯高溫合成製備方法[P].CN200810116153.7.北京科技大學.2008-11-19；
[4]黃繼華;熊進輝;薛行雁;張華;趙興科;田亮.一種Cf/SiC複合材料與鈦合金的連線方法[P].CN200910076621.7.北京科技大學.2009-06-24；
[5]張華;吳會強;黃繼華;趙興科.一種分體式攪拌摩擦焊攪拌頭[P].CN200910203401.6.北京科技大學.2009-10-21；
[6]張華;吳會強;黃繼華;趙興科.可改善焊縫性能的多足式攪拌摩擦焊焊接方法[P].CN200910203403.5.北京科技大學.2009-10-21；
[7]張華;吳會強;黃繼華;趙興科.一種攪拌探針可拆卸重複使用的分體式攪拌摩擦焊攪拌頭[P].CN200910203404.X.北京科技大學.2009-10-21；
[8]張華;吳會強;黃繼華;趙興科.可改善焊縫性能的多足式攪拌摩擦焊攪拌頭[P].CN200910203405.4.北京科技大學.2009-10-21；
[9]張華;黃繼華;吳會強;趙興科;李正華.一種鋁基複合材料板材的攪拌摩擦製備方法[P].CN200910203402.0.北京科技大學.2009-10-21；
[10]張華;吳會強;黃繼華;趙興科.可改善焊縫性能的多足式攪拌摩擦焊攪拌頭[P].CN200920153929.2.北京科技大學.2010-07-21。
