趙劍，男，大連理工大學教授， 博士生導師。
基本介紹
- 中文名：趙劍
- 職業：大連理工大學 教授 博士生導師
- 畢業院校：西安電子科技大學
- 性別：男
個人簡介,人物經歷,社會兼職,研究領域（研究課題）,碩博研究方向,出版著作和論文,工作成果（獎勵、專利等）,
個人簡介
趙劍，男，大連理工大學教授，博士生導師。
人物經歷
2015.12-至今 大連理工大學 教授 博士生導師
2012.12-2015.12 大連理工大學 副教授 博士生導師
2008.10-2012.12 大連理工大學 講師
2008. 12-2009.8 奧地利克卜勒林茨大學 博士後（奧方全資）
2005.4-2008.9 西安電子科技大學機械工程 博士（校優博）
2003.8-2006.3 西安電子科技大學 機械電子工程 碩士
1999.8-2003.6 桂林電子科技大學 機械電子工程 學士
社會兼職
中國電子學會 高級會員、國家音視頻標準委員會委員、IEEE工業電子學會會員、EICE2014技術委員會委員
期刊IEEE/ASME T M, IEEE TIE, IEEE S J, Sensors and Actuators A, Sensors and Actuators B, Mechatronics, JMES, RSI, Journal of Mechanical Science, 力學學報、機械工程學報等審稿人。
研究領域（研究課題）
1. 國家自然科學金面上項目、青年基金項目；
2. 教育部博士點基金項目；
3. 大連理工大學星海學者-“星海優青”資助
4. 中央高校基本科研業務——理科基金項目；
5. 大連理工大學校教改項目 1項，參加本科教改項目1項
參與多項國家自然科學基金、973項目、863項目及國防預研項目；
碩博研究方向
1. 車輛先進感知與主動安全保護技術
2. 非線性機械感測器最佳化設計
3. 環境與生物感測器設計
4. 車輛智慧型變形與振動控制
出版著作和論文
[1]Jian Zhao, Renjing Gao, Shutian Liu, Yu Huang. A New Sensitivity-Improving Method for Piezoelectric Resonance Mass Sensors Through Cantilever Cross-Section Modification. IEEE Transactions on Industrial Electronics, 61(3), pp 1612-1621, 2013.
[2]Zhao Jian, Yu Huang, Renjing Gao, Guoxi Chen, Shutian Liu, Yintang Yang, Kefeng Fan. Novel Universal Multistable Mechanism Based on Magnetic-Mechanical-Inertial Coupling Effects. IEEE Transactions on Industrial Electronics, 61(6), pp 101-111, 2013.
[3]Jian Zhao, et.al. A Bidirectional Acceleration Switch Incorporating Magnetic Fields Based Tristable Mechanism. IEEE/ASME Transactions on Mechatronics, 2013, 18(1).
[4]Jian Zhao, Yongcun Zhang, Yu Huang, Shutian Liu, Guoxi Chen, Renjing Gao, Yintang Yang. Mechanical-magnetic Coupling Analysis of A Novel Large Stroke Penta-stable Mechanism Possessing Multistability Transforming Capability. ASME Transactions Journal of Mechanisms and Robotics. 2014:(doi:10.1115/1.402663).
[5]Gao Renjing, Zhang Yankang, Jian Zhao*, Shutian Liu. A Novel V-Shaped Cross Section Cantilever Sensor for Monitoring Concentrated Masses With Improved Detecting Sensitivity and Measuring Accuracy. IEEE Sensors Journal. 2013, 14(2), pp 11-19.
[6]Jian Zhao, Jianyuan Jia, Hongxi Wang, et.al. A Novel Threshold Accelerometer with Post-buckling Structures for Airbag Restraint Systems. IEEE Sensors Journal, 2007, 7(8)
[7]Jian Zhao, Jianyuan Jia, Hongxi Wang. Post-buckling and Snap-through Behavior of Inclined Slender Mirobeams. ASME Transactions Journal of Applied Mechanics, 75(4), 2008.
[8]Jian Zhao, Yintang Yang, Hongxi Wang, Jianyuan Jia. A Novel magnetic actuated Bistable Acceleration Switch with low contact resistance. IEEE Sensors Journal. 2010, 10(4):869-876.
[9]Jian Zhao, Yintang Yang, Kefeng Fan, Ping Hu, Hongxi Wang. A bistable threshold accelerometer with fully compliant clamped-clamped mechanism. IEEE Sensors Journal, 2010,10(5):1019-1024.
[10]Jian Zhao, Hongxi Wang, Renjing Gao, Ping Hu, Yintang Yang. A novel alignment mechanism employing orthogonal connected multi-layered flexible hinges for both leveling and centering. Review of Scientific Instruments, 2012, 83(1), 065102.
[11]Gao Renjing, Zhang Yankang, Jian Zhao, Shutian Liu. A Novel V-Shaped Cross Section Cantilever Sensor for Monitoring Concentrated Masses With Improved Detecting Sensitivity and Measuring Accuracy. IEEE Sensors Journal. 2013, 14(2), pp 11-19.
[12]Hongxi Wang, Jian Zhao*, Renjing Gao, Yintang Yang. A novel constant-force scanning probe incorporating mechanical-magnetic coupled structures. Review of Scientific Instruments, 2011, 82(1), 075101.
[13]Jian Zhao, Yu Huang, Yintang Yang, Renjing Gao. Dynamics of a novel bistable mechanism with mechanical-magnetic coupled structure. Journal of Central South University. 2012, 19(7).(SCI: 000305957100014)
[14]Shi Peng Fei, Gao Renjing, Shutian Liu, Jian Zhao. A new design method for a strain sensor using the cross-section modification of a coaxial cable. Sensors and Actuators A: Physical, 203(12), pp 355-361, 2013, (EI、SCI, IF=1.89)
[15]Huang Yu, Liu Shutian, Zhao Jian. Optimal design of two-dimensional band-gap materials for uni-directional wave propagation. Structural and Multidisciplinary Optimization. 2013, 48(3), pp 487-499. (SCI EI, IF=1.8).
[16]趙劍, 朱傳月, 高仁璟. 梯形變截面懸臂樑式質量感測器設計與分析. 儀器儀表學報. 2013, 34(12).
[17]賈建援, 趙劍*, 王洪喜.非線性傾斜梁結構的後屈曲力學特性分析, 機械工程學報，2009, 45(2):138-143. (EI:20091111955761).
[18]趙劍, 賈建援, 王洪喜. 雙穩態屈曲梁的非線性跳躍特性研究.西安電子科技大學學報.34(3),2007.(EI: 072810698153).
[19]趙劍, 王洪喜, 賈建援.計及邊緣效應的靜電驅動微結構靜電力計算. 微納電子技術. 43(2), 2006.
[20]高仁璟, 趙劍,李雪,唐禎安. 基於槽式懸臂樑結構的微質量感測器設計. 光學 精密工程, 2012, 20(1):102-108. (EI: 20120614748542)
[21]高仁璟, 趙劍*. 梯形變截面懸臂樑式微質量感測器設計與分析. 感測技術學報, 2012, 25(10),1349-1353.
[22]Jian Zhao,Yu Huang, Renjing Gao, Hongxi Wang. Dynamics of a Bistable switch mechanism with Parallel Beams and Permanent Magnets. 2011 International Conference on Advanced Design and Manufacturing Engineering, September 16-18, 2011. Guangzhou, China. Advanced Materials Research, 2011, 20(308-310):508-512. (EI:20114014384963) (Oral presentation).
[23]Jian Zhao, Guoxi Chen, Lei Niu, Yu Huang. A tristable mechanism using combination of magnetic mechanisms and compliant beams. The 23rd International Congress of Theoretical and Applied Mechanics, ICTAM2012. (Oral presentation)
[24]Jian Zhao, Guoxi Chen, Yu Huang. An accurate computation model for magnetic-mechanical based penta-stable mechanism. The 23rd International Congress of Theoretical and Applied Mechanics, ICTAM2012. (Oral presentation)
[25]Shutian Liu, Yu Huang, Jian Zhao. Gradient based optimization of periodic layered material with specific band-gap characteristics (SM15-043). The 23rd International Congress of Theoretical and Applied Mechanics, ICTAM2012
工作成果（獎勵、專利等）
遼寧省自然科學學術論文一等獎,2012，2015，
大連市自然科學優秀學術論文特等獎，2015
大連市青年科技之星
大連市自然科學優秀論文二等獎，2013,2014
錢令希力學基金青年教師獎二等獎,2011
西安電子科技大學優秀博士學位論文,2009
大連理工大學優秀教學成果二等獎
申請國家發明專利20項，已授權發明13項，授權實用新型4項，實質審查8項。
