蘇欣榮，男，博士，現任清華大學講師。
基本介紹
- 中文名：蘇欣榮
- 國籍：中國
- 學位/學歷：博士
- 職業：教師
- 專業方向：葉輪機械內部流動數值方法及流動機理研究
- 任職院校：清華大學
- 性別：男
教育背景,工作履歷,研究領域,學術成果,
教育背景
2000.09—2004.07，清華大學熱能工程系，學士學位
2004.09—2010.07，清華大學熱能工程系，博士學位
2008.10—2009.09，劍橋大學，訪問學生
工作履歷
2010.08—2012.03，日本東北大學航空系，博士後
2012.04—2014.03，日本東北大學計算機與數學系，博士後
2014.05—今，清華大學熱能工程系，講師
研究領域
1.葉輪機械內部流動數值方法及流動機理研究
2.飛行器外流數值系統開發
3.多物理場計算及伴隨理論和伴隨最佳化
學術成果
1. Xinrong Su, Satoru Yamamoto, Kazuhiro Nakahashi, Extending the Building Cube Method to Curvilinear Mesh with Adaptive Mesh Refinement, Journal of Fluid Science and Technology, accepted
2. Xinrong Su, Xin Yuan, Improved Compressor Corner Separation Prediction with the Quadratic Constitute Relation, 11th International Conference on Fluid Dynamics, Sendai, Japan, 2014
3. Xinrong Su, Xin Yuan, Predicting Compressor Corner Separation with Nonlinear Eddy-viscosity Model, Asian Congress on Gas Turbine, Seoul, Korea, 2014
4. Xinrong Su, Satoru Yamamoto, A new matrix dissipation model for central scheme, International Journal for Numerical Methods in Fluids, 2014, 74(7), pp. 494-514
5. Xinrong Su, Satoru Yamamoto, Turbomachinery flow computation with Adaptive Mesh Refinement, 27th Computational Fluid Dynamics Symposium, Nagoya, 2013
6. Xinrong Su, Satoru Yamamoto, Kazuhiro Nakahashi, Extending the Building Cube Method to curvilinear mesh with Adaptive Mesh Refinement, 10th International Conference on Fluid Dynamics, Sendai, 2013
7. Xinrong Su, Daisuke Sasaki, Kazuhiro Nakahashi, Cartesian mesh with a novel hybrid WENO/meshless method for turbulent flow calculations, Computers and Fluids, 2013, 84(0), pp. 69-86
8. Xinrong Su, Satoru Yamamoto, Xin Yuan, On the accurate prediction of tip vortex: effect of numerical schemes, ASME/IGTI GT2013-94660, San Antonio, 2013
9. Xinrong Su, Satoru Yamamoto, Kazuhiro Nakahashi, Analysis of a meshless solver for high Reynolds number flow, International Journal for Numerical Methods in Fluids, 2013, 72(5), pp. 505-527
10. Xinrong Su, Daisuke Sasaki, Kazuhiro Nakahashi, On the efficient application of Weighted Essentially Nonoscillatory scheme, International Journal for Numerical Methods in Fluids, 2013, 71(2), pp. 185-207
11. Xinrong Su, Daisuke Sasaki, Kazuhiro Nakahashi, A hybrid scheme for the near wall treatment of Building Cube Method, Journal of Fluid Science and Technology, 2012, 7(2), pp. 197-208
12. Xinrong Su, Satoru Yamamoto, Kazuhiro Nakahashi, A simple method for three dimensional characteristic boundary conditions with cell-centered solver, 9th International Conference on Fluid Dynamics, Sendai, 2012
13. Xinrong Su, Daisuke Sasaki, Kazuhiro Nakahashi, Efficient implementation of WENO scheme on structured meshes, 25th Computational Fluid Dynamics Symposium, Osaka, 2011
14. Xinrong Su, Daisuke Sasaki, Kazuhiro Nakahashi, Development of a directional ghost cell method and the multigrid acceleration for the Building Cube Method, 8th International Conference on Fluid Dynamics, Sendai, 2011
15. Xinrong Su, Daisuke Sasaki, Kazuhiro Nakahashi, A hybrid scheme for the near wall treatment of Building Cube Method, 8th International Conference on Fluid Dynamics, Sendai, 2011
16. Xinrong Su, Xin Yuan, Implicit solution of time spectral method for periodic unsteady flows, International Journal for Numerical Methods for Fluids, 2010, 63(7), pp. 860-876
17. 王中南, 蘇欣榮, 袁新, 非結構格線上動能守恆的低耗散數值方法, 清華大學學報, 2012, 52(4), pp. 468-472, EI收錄
18. 蘇欣榮, 袁新. 譜方法用於非定常流動計算的隱式求解. 工程熱物理學報, 2009, 30(12), pp. 2010-2012，EI收錄
19. 蘇欣榮, 袁新. 時域譜方法用於內流非定常流動計算. 清華大學學報, 2009, 49(2), pp. 261-264, EI收錄
20. 蘇欣榮, 袁新. 譜方法用於非定常流動計算的隱式求解. 中國工程熱物理學會熱機氣動熱力學學術會議, 天津, 2008,編號082092
21. 蘇欣榮, 袁新. 多級軸流壓氣機全工況特性計算. 工程熱物理學報, 2006, 34(4), pp. 203-206, EI收錄
22. 蘇欣榮, 袁新. 多級軸流壓氣機整機氣動性能預估. 中國工程熱物理學會熱機氣動熱力學學術會議, 重慶, 2006, 編號 062113
23. 蘇欣榮, 袁新. 時域譜方法用於內流非定常流動計算. 中國工程熱物理學會熱機氣動熱力學學術會議, 重慶, 2006, 編號062013
24. 蘇欣榮, 袁新. 多級軸流壓氣機全工況特性預測. 熱力透平, 2005, 34(4), pp. 203-206
25. 蘇欣榮, 袁新. 多級軸流壓氣機全工況特性計算. 中國工程熱物理學會熱機氣動熱力學學術會議, 北京, 2005, 編號052077
26. 蘇欣榮, 袁新. 多級軸流壓氣機全工況特性計算. 中國工程熱物理學會熱機氣動熱力學學術會議, 西安, 2004, 編號042074
