程暉(西北工業大學機電學院副教授)

程暉(西北工業大學機電學院副教授)

程暉,男,漢族,國籍中國,1984.05出生,工學博士,西北工業大學機電學院副教授。

基本介紹

  • 中文名:程暉
  • 國籍:中國
  • 出生日期:1984.05
  • 職業:教師
  • 學位/學歷:博士、研究生
  • 專業方向:先進裝配與連線技術
  • 職務:副教授
簡介,基本情況,社會兼職,主要研究方向與項目,研究方向,學術成果Academic Achievements,榮譽獲獎,

簡介

基本情況

程暉,1984.05出生,工學博士,西北工業大學機電學院副教授。

社會兼職

The Scientific World Journal編委。
Computational Mechanics, International Journal of Advanced Manufacturing Technology, Assembly Automation, Journal of Aerospace Engineering, Computer Graphics Forum等SCI期刊審稿人。

主要研究方向與項目

研究方向

主要從事先進裝配與連線技術方向研究,具體包括:
(1)大型薄壁件裝配變形機理與控制方法
(2)碳纖維複合材料結構損傷機理與工藝最佳化方法
(3)計算機圖形圖像識別與分析

學術成果Academic Achievements

1.Cheng, H.,Gao, J., Kafka, O., Zhang, K., Luo, B., Liu, W. K., A micro-scale cutting model for UD CFRP composite with thermo-mechanical coupling. Composite Science and Technology. 2017, 153:18-31.
2.Cheng, H.,Zhang, K., Wang, N., Luo, B., Meng, Q., A novel six-state cutting force model for drilling-countersinking machining process of CFRP-Al stacks. The International Journal of Advanced Manufacturing Technology,2017, 89(5-8): 2063-2076.
3.Cheng, H., Li, Y., Zhang, K. , Luan, C., Optimizing method of fixture layout for aeronautical thin-walled structures with automated riveting. Assembly Automation. 2012, 32(4): 323-332.
4.Cheng, H., Wang, R. , Li, Y., Zhang, K., Modeling and analyzing of variation propagation in aeronautical thin-walled structures automated riveting. Assembly Automation. 2012, 32 (1):25-37.
5.Cheng, H., Li, Y., Zhang, K., Mu W., Variation modeling of aeronautical thin-walled structures with multi-state riveting. Journal of Manufacturing Systems, 2011, 30 (2): 101-115.
6.Cheng, H., Li, Y., Zhang, K., Efficient method of positioning error analysis for aeronautical thin-walled structures multi-state riveting. The International Journal of Advanced Manufacturing Technology, 2011, 55(1-4): 217-233.
7.Cheng, H., Li, Y., Zhang, K., Efficient method of assembly sequence planning based on GAAA and optimizing by assembly path feedback for complex product. The International Journal of Advanced Manufacturing Technology, 2009, 42(11-12): 1187-1204+1205.
8. Zhang, K.,Cheng, H., Li, Y. Riveting process modeling and simulating for deformation analysis of aircraft's thin-walled sheet-metal parts. Chinese Journal of Aeronautics, 2011, 24(3): 369-377.
9. Zhang, K.,Cheng, H., Li, Y. Multi-objective Harmonious colony-decision algorithm for more efficiently evaluating assembly sequences. Assembly Automation. 2008, 28(4): 348-355.
10. Chen, L. Zhang, K.,Cheng, H., Qi, Z., Meng, Q., A cutting force predicting model in orthogonal machining of unidirectional CFRP for entire range of fiber orientation.The International Journal of Advanced Manufacturing Technology, 2017, 89(1-4): 833-846.
11. Wu, T., Zhang, K.,Cheng, H., Liu, P., Song, D., Li, Y., Analytical modeling for stress distribution around interference fit holes on pinned composite plates under tensile load. Composite PartB-Engineering, 2016, 100: 176-185.
12. Meng, Q.X., Zhang, K.F.,Cheng, H., Liu S.N. Jiang, S. S. An analytical method for predicting the fluctuation of thrust force during drilling of unidirectional carbon fiber reinforced plastics. Journal of Composite Materials,2015, 49(6): 699-711.
13. Qi, Z., Zhang, K.,Cheng, H., Wang, D., Meng, Q.,Microscopic mechanism based force prediction in orthogonal cutting of unidirectional CFRP. The International Journal of Advanced Manufacturing Technology, 2015, 79(5-8): 1209-1219.
14. Zou, P., Li, Y., Zhang, K.Cheng, H., Li, J. Influence of interference-fit percentage on stress and damage mechanism in hi-lock pin installation process of CFRP.Journal of Composite Materials,2017, 51(25):3525-3538.
15. Song, D., Zhang, K., Li, Y.,Cheng, H., Liu, P., Hu, J., Micromechanical analysis for microscopic damage initiation in fiber/epoxy composite during interference-fit pin installation. Material & Design, 2016, 89:36-49.
16. Lou, B., Li, Y., Zhang, K.,Cheng, H., Liu, S., A novel prediction model for thrust force and torque in drilling interface region of CFRP/Ti stacks.The International Journal of Advanced Manufacturing Technology, 2015, 81(9-12): 1497-1508.
17. Lou, B., Li, Y., Zhang, K.,Cheng, H., Liu, S.,Effect of workpiece stiffness on thrust force and delamination in drilling thin composite laminates. Journal of Composite Materials,2017, 50(5):617-628.
18. Xu, Z., Li, Y., Zhang, J.,Cheng, H., Jiang, S. S., Tang, W. B. A dynamic assembly model for assembly sequence planning of complex product based on polychromatic sets theory. Assembly Automation. 2012, 32 (2): 152-162.
19.Xiao, H., Li, Y., Yu, J. Cheng, H.,Dynamic assembly simplification for virtual assembly process of complex product. Assembly Automation. 2014, 34(1): 1-15.
20. Song, D., Zhang, K., Li, Y.,Liu, P.,Cheng, H., Wu, T.,Stress distribution modeling for interference-fit area of each individual layer around composite laminates joint.Composite PartB-Engineering, 2015, 78: 469-479.
21. Qi Z., Zhang, K., Li Y., Liu S.,Cheng H.Critical thrust force predicting modeling for delamination-free drilling of metal-FRP stacks. Composite Structures, 2014, 107: 604-609.

榮譽獲獎

1.陝西省科學技術獎一等獎,2015年(第2完成人)
2.陝西省高等學校科學技術獎一等獎,2013年(第2完成人)
3.陝西省科學技術獎二等獎,2009年(第8完成人)
4.陝西省信息產業廳科技成果一等獎,2007年(第8完成人)
5.陝西省高校首批“青年傑出人才支持計畫”
6.2014 Outstanding Reviewer Award of “Assembly Automation”

相關詞條

熱門詞條

聯絡我們