祝銀海，男，博士，現任清華大學副研究員。
基本介紹
- 中文名：祝銀海
- 學位/學歷：博士
- 職業：教師
- 專業方向：製冷低溫與傳熱傳質
教育背景,工作履歷,研究領域,獎勵與榮譽,學術成果,
教育背景
1999.9-2003.7 西安交通大學能源與動力工程學院 熱能與動力工程專業 學士
2003.9-2006.6 西安交通大學能源與動力工程學院 製冷及低溫工程專業 碩士
2006.9-2009.12 西安交通大學能源與動力工程學院 製冷及低溫工程專業 博士
2007.7-2008.7新加坡南洋理工大學 國家公派聯合培養博士生
工作履歷
2009.11-2011.10 清華大學熱能工程系 博士後 助理研究員
2011.11-2013.12 清華大學熱能工程系 助理研究員
2013.12-至今 清華大學熱能工程系 副研究員
研究領域
主要從事製冷低溫與傳熱傳質領域的研究工作，主要研究內容有：噴射製冷系統、跨臨界二氧化碳空調與熱泵系統、液體運載火箭熱控技術、超燃衝壓發動機主動冷卻技術等。
獎勵與榮譽
西安交通大學年度“優秀研究生標兵”表彰獎勵（2008）
中國青少年科技創新獎（2009）
西安交通大學校級優秀博士學位論文獎（2010）
學術成果
負責的科研項目：
噴射器內激波調控與超音速兩相流熱質傳遞機理研究、國家自然科學基金面上項目、2016-2019、負責人
蒸汽噴射器的激波特性與引射機理研究、清華大學自主科研計畫、2015-2017、負責人
噴射器內跨臨界CO2的跨音速流動和霧化相變問題研究、國家自然科學青年基金、 2012-2014、負責人
非絕熱裂解XXX、高超聲速衝壓發動機技術重點實驗室、2013-2014、負責人
參與的科研項目：
超臨界壓力流體在多因素作用下的流動與熱質傳遞機理研究、國家自然科學基金重點項目、2016-2020、研究骨幹
高溫與超音速條件下碳氫燃料發汗冷卻基礎問題研究、國家自然科學基金面上項目、2013-2016、研究骨幹
XXX反應機理研究、國家重大專項、2011-2015、研究骨幹
XXX機理及熱防護研究、國防基礎科研計畫項目、2011-2013、研究骨幹
Z. Huang, Y. H. Zhu, Y. B. Xiong, and P. X. Jiang, INVESTIGATION OF SUPERSONIC TRANSPIRATION COOLING THROUGH SINTERED METAL POROUS FLAT PLATES. Journal of Porous Media, 18 (11): 1047–1057 (2015).
Bo Liu, Yinhai Zhu, Jun-Jie Yan, Yuntao Lei, Bo Zhang, Pei-Xue Jiang. Experimental investigation of convection heat transfer of n-decane at supercritical pressures in small vertical tubes. International Journal of Heat and Mass Transfer 91 (2015) 734–746.
Z. Huang, Y. H. Zhu, P. X. Jiang, and Y. B. Xiong, "Investigation of a Porous Transpiration-Cooled Strut Injector," Journal of Propulsion and Power, Vol. 31, No. 1 (2015), pp. 278-285.
Zheng Huang, Yan-Bin Xiong, Yuan-Qing Liu, Pei-Xue Jiang, Yin-Hai Zhu. Experimental investigation of full-coverage effusion cooling through perforated flat plates. Applied Thermal Engineering 76 (2015) 76-85.
Yinhai Zhu, Peixue Jiang. Experimental and analytical studies on the shock wave length in convergent and convergent–divergent nozzle ejectors. Energy Conversion and Management 88 (2014) 907–914.
Zheng Huang, Yin-hai Zhu, Yan-bin Xiong, Pei-xue Jiang. Investigation of transpiration cooling for sintered metal porous struts in supersonic flow. Applied Thermal Engineering, Volume 70, Issue 1, 5 September 2014, Pages 240-249.
Yinhai Zhu, Peixue Jiang. Bypass ejector with an annular cavity in the nozzle wall to increase the entrainment: Experimental and numerical validation. Energy, Volume 68, 15 April 2014, Pages 174-181.
Yinhai Zhu, Peixue Jiang. Experimental and numerical investigation of the effect of shock wave characteristics on the ejector performance. International Journal of Refrigeration, Volume 40, April 2014, Pages 31-42.
Zhu, Yinhai; Liu, Bo; Jiang, Peixue. Experimental and Numerical Investigations on n-Decane Thermal Cracking at Supercritical Pressures in a Vertical Tube. ENERGY & FUELS 28(1): 466-474: JAN 2014.
Xiong Yanbin &, Zhu Yinhai, Jiang Peixue. Numerical Simulation of Transpiration Cooling forSinteredMetalPorousStrutoftheScramjetCombustionChamber. Heat Transfer Engineering, 2014, 35(6-8)：721-729.
Zhu, Yinhai; Jiang, Peixue; Sun, Jiguo; Xiong, Yanbin. Injector head transpiration cooling coupled with combustion in H2/o2 subscale thrust chamber. Journal of Thermophysics and Heat Transfer,v 27, n 1, p 42-51, January-March 2013.
Zhu Yinhai, Jiang Peixue, Hybrid vapor compression refrigeration system with an integrated ejector cooling cycle，International Journal of Refrigeration，Volume 35, Issue 1, Pages 68-78, JAN 2012.
Yinhai Zhu, Yanzhong Li, Wenjian Cai. Control oriented modeling of ejector in anode gas recirculation solid oxygen fuel cell systems. Energy Conversion and Management. Volume 52, Issue 4, 2011, Pages 1881-1889.
Yinhai Zhu, Wenjian Cai, Changyun Wen, Yanzhong Li. Shock circle model for ejector performance evaluation. Energy Conversion and Management, Volume 48, Issue 9, September 2007, Pages 2533-2541.
Yinhai Zhu, Wenjian Cai, Changyun Wen, Yanzhong Li. Simplified ejector model for control and optimization.Energy Conversion and Management, Volume 49, Issue 6, June 2008, Pages 1424-1432.
Yinhai Zhu, Wenjian Cai, Changyun Wen, Yanzhong Li. Fuel ejector design and simulation model for anodic recirculation SOFC system.Journal of Power Sources, Volume 173, Issue 1, 8 November 2007, Pages 437-449.
Yinhai Zhu, Yanzhong Li. Three-dimensional Numerical Simulation on the Laminar Flow and Heat Transfer in Four Basic Fins of Plate-fin Heat Exchangers.ASME, Journal of Heat Transfer, NOVEMBER 2008, Vol. 130, Issue 11, Pages 111801-1–111801-8.
Yinhai Zhu, Yanzhong Li. Novel Ejector Model for Performance Evaluation on Both Dry and Wet Vapors Ejectors.International Journal of Refrigeration,Volume 32, Issue 1,January 2009,Pages 21-31.
Yinhai Zhu, Wenjian Cai, Yanzhong Li, Changyun Wen. Anode gas recirculation behavior of a fuel ejector in hybrid SOFC systems: Performance evaluation in three operational modes.Journal of Power Sources,Volume 185, Issue 2,1 December 2008,Pages 1122-1130.
Yinhai Zhu, Wenjian Cai, Changyun Wen, Yanzhong Li. Numerical investigation of geometry parameters for design of high performance ejectors.Applied Thermal Engineering,Volume 29, Issues 5-6,April 2009,Pages 898-905.
Yinhai Zhu, Yanzhong Li. New theoretical model for convergent nozzle ejector in the proton exchange membrane fuel cell system.Journal of Power Sources,Volume 191, Issue 2,15 June 2009,Pages 510-519.（SCI: 454HM；EI: 20092012080234）
Feng Yu, Yanzhong Li,Yinhai Zhu. Numerical and experimental investigation on the thermal insulation performance of low temperature cold box[J].International Communication in Heat and Mass Transfer，Volume 36, Issue 9,November 2009,Pages 908-911.
祝銀海,姜培學.旁通型噴嘴噴射器的環隙結構對性能的影響[J].工程熱物理學報,2015,11:2324-2327.
蘆澤龍,嚴俊傑,祝銀海,姜培學.碳氫燃料在旋轉通道中傳熱的數值模擬[J].工程熱物理學報,2015,11:2498-2501.
嚴俊傑,祝銀海,蘆澤龍,姜培學.超臨界壓力碳氫燃料瞬態加熱回響特性[J].化工學報,2015,S1:65-70.
王夕,劉波,祝銀海,姜培學,嚴俊傑,蘆澤龍.超臨界壓力下RP-3在細圓管內對流換熱實驗研究[J].工程熱物理學報,2015,02:360-365.
黃拯,祝銀海,熊宴斌,姜培學.激波對超音速平板發汗冷卻的影響[J].工程熱物理學報,2014,11:2288-2293.
劉波,王夕,祝銀海,姜培學.超臨界壓力下正癸烷在微細圓管內對流換熱實驗研究[J].工程熱物理學報,2014,(1) :114-118.
熊宴斌,姜培學,祝銀海,等.冷端邊界條件對發汗冷卻解析解的影響[J].清華大學學報(自然科學版),2013,(10) :1452-1458.
熊宴斌&,祝銀海,姜培學,黃拯，劉元清.單相液體發汗冷卻規律實驗研究.航空動力學報. 2013, 28(9):1956-1961.
祝銀海,姜培學,楊煒平,徐珊姝.液體火箭發動機液氧箱與預冷迴路的耦合計算模型.工程熱物理學報,2012,(5).
祝銀海;姜培學.液體火箭推力室面板發汗冷卻與燃燒耦合數值模擬.工程熱物理學報. 2012,(1).
Yinhai Zhu, Peixue Jiang. Geometry Optimization Study of Ejector in Anode Recirculation Solid Oxygen Fuel Cell System. Proceedings of the 2011 6th IEEE Conference on Industrial Electronics and Applications, ICIEA 2011. June 21, 2011 - June 23, 2011. Beijing, China.
Yinhai Zhu, Yanzhong Li, Wenjian Cai.Numerical modeling and analysis of ejector in the proton exchange membrane fuel cell system[C]. ICIEA 2009, 4th IEEE Conference on Industrial Electronics and Applications. 2009: 2859-2861.
Feng Yu, Yanzhong Li,Yinhai Zhu.Numerical and experimental investigation of the coupled heat transfer in cold box[C]. ICIEA 2009, 4th IEEE Conference on Industrial Electronics and Applications. 2009: 1315-1319.
Xianghua Cheng, Yanzhong Li, Erfeng Chen,Yinhai Zhu.Study on thermal stratification in rocket liquid oxygen tank with natural circulation precooling loop[C]. ICIEA 2009, 4th IEEE Conference on Industrial Electronics and Applications.2009:2971-2975.
Yinhai Zhu, Wenjian Cai, Changyun Wen. Development of control model for critical operation ejector.ICIEA 2007: 2007 Second IEEE Conference on Industrial Electronics and Applications.
祝銀海;厲彥忠.板翅式換熱器翅片通道中流體流動與傳熱的計算流體力學模擬.化工學報, 2006年05期.
祝銀海;厲彥忠;余鋒.低溫冷箱中輻射與導熱耦合傳熱的數值模擬.西安交通大學學報, 2005年09期.
祝銀海;厲彥忠;魚劍琳;蔡文劍.噴射器的一種新模型及其實驗驗證.西安交通大學學報, 2008年09期42卷.
祝銀海;厲彥忠;魚劍琳;蔡文劍.基於製冷劑R141B的噴射器混合模型及其實驗驗證.化工學報, 2008年09期59卷.
米廷燦;厲彥忠;王江;祝銀海.一種計算板翅式換熱器二次表面換熱的新模型.西安交通大學學報, 2004年05期.
專利：
祝銀海，姜培學.一種噴射器.發明專利.批准號：201310179043.6
姜培學，祝銀海.利用發汗冷卻對超燃發動機燃料噴注支板的熱防護方法.發明專利.批准號：201310561911.7
姜培學，祝銀海.利用發汗與衝擊冷卻對超燃發動機噴注支板的熱防護方法.發明專利.批准號：201310561173.6
