基本介紹
- 中文名：王科盛
- 職業：教師
- 畢業院校：北京化工大學
- 學位/學歷：博士
個人經歷,主要科研:,發表論文:,
個人經歷
1996.09-2000.07 北京化工大學 本科
2000.07-2004.01 震雄機械(深圳)有限公司 工程師
2004.02-2004.07 南非茲瓦尼理工大學 英語學生
2004.07-2010.12 南非比勒陀利亞大學 碩士/博士
2011.06- 電子科技大學機電學院 教師
主要科研:
2007至今 作為比勒陀利亞大學，沙索實驗室研究人員，配合 南非最大的發電廠 ESKOM，研究發電機定子尾部纏繞部分振動監測信號處理工作。
2008年至今 與導師一起申請成功南非國家研究基金項目- 比勒陀利亞大學機械工程系與清華大學機械工程系合作 轉動機子振動檢測方法研究 擔任主要研究人員。
發表論文:
1) Wang, K. S. & Heyns, P. S. (2008), Inspecting FFT order components through the joint use if computed order tracking and Vold-Kalman filter order tracking. 21st Intentional Congress and Exhibition. Condition Monitoring and Diagnostic Management (Comadem) 2008, Prague, June 2008.
2) Wang, K. S. & Heyns, P. S. (2009), Vold-Kalman filter order tracking in vibration monitoring of electrical machines. Journal of Vibration and Control. 15(9), pp 1325-1347.
3) Wang, K. S. & Heyns, P. S. (2009), A practical vibration signal processing technique for rotating mechanism condition monitoring-(IVK-OT). International Aerospace Symposium of South Africa, Nov. 2009.
4) Wang K S, Heyns P S. Application of computed order tracking, Vold–Kalman filtering and EMD in rotating machine vibration. Mechanical Systems and Signal Processing, 2011, 25(1): 416-430.
5) Wang K S, Heyns P S. The combined use of order tracking techniques for enhanced Fourier analysis of order components. Mechanical systems and signal processing, 2011, 25(3): 803-811.
6) Wang K S, Heyns P S. An empirical re-sampling method on intrinsic mode function to deal with speed variation in machine fault diagnostics. Applied Soft Computing, 2011, 11(8): 5015-5027.
7) Wang K S, Guo D, Heyns P S. The application of order tracking for vibration analysis of a varying speed rotor with a propagating transverse crack. Engineering Failure Analysis, 2012, 21: 91-101.
8）Feng K, Wang K S, Zhang M, Ni Q, Zuo M J.A diagnostic signal selection scheme for planetary gearbox vibration monitoring under non-stationary operational conditions. Measuremnt Science and Technology. Accepted.http://dx.doi.org/10.1088/1361-6501/aa543e.
9) Wang K, Wang Y, Luo D, et al. Application of order tracking rationale to non-rotating cantilever beam analysis//Prognostics and Health Management (PHM), 2014 IEEE Conference on. IEEE, 2014: 1-6.
10)Guo W, Wang K S, Wang D, et al. Feature Signal Extraction Based on Ensemble Empirical Mode Decomposition for Multi-fault Bearings//Engineering Asset Management-Systems, Professional Practices and Certification. Springer International Publishing, 2015: 1337-1347.
11)Wang K S, Luo D S, Guo W, et al. Improvements in Computed Order Tracking for Rotating Machinery Fault Diagnosis//Engineering Asset Management-Systems, Professional Practices and Certification. Springer International Publishing, 2015: 1371-1380.
12Guo W, Wang K, Zuo M J. An adaptive signal processing method for extraction of a weak bearing signal//Quality, Reliability, Risk, Maintenance, and Safety Engineering (QR2MSE), 2013 International Conference on. IEEE, 2013: 1712-1715.
13)Luo D, Wang K, Zhang L, et al. Reliability optimization for redundant Flight Control System based on genetic algorithm//Quality, Reliability, Risk, Maintenance, and Safety Engineering (QR2MSE), 2013 International Conference on. IEEE, 2013: 539-544.
14)Luo D, Wang K, Zhang L, et al. Dynamic precision reliability analysis for six degrees of freedom micro-displacement mechanism of reticle stage in lithography machine based on Monte-Carlo//Quality, Reliability, Risk, Maintenance, and Safety Engineering (QR2MSE), 2013 International Conference on. IEEE, 2013: 250-252.
15)Luo D, Wang K, Zhang L, et al. Dynamic error analysis for six degrees of freedom micro-displacement mechanism in reticle stage of lithography machine//Quality, Reliability, Risk, Maintenance, and Safety Engineering (QR2MSE), 2013 International Conference on. IEEE, 2013: 529-535.
16)Shao J, Wan H, Huang H Z, et al. Study on modeling and diagnosis of the satellite power system//Quality, Reliability, Risk, Maintenance, and Safety Engineering (ICQR2MSE), 2012 International Conference on. IEEE, 2012: 607-611.
17)Wang K, Heyns P S. A comparison between two conventional order tracking techniques in rotating machine diagnostics//Quality, Reliability, Risk, Maintenance, and Safety Engineering (ICQR2MSE), 2011 International Conference on. IEEE, 2011: 478-481.
18）Wang K, Feng K, Zuo M J. An order spectrum-based method to ensure consistent monitoring through Vold-Kalman filter order tracking. International Journal of Condition Monitoring, 2016: 6(3): 62-65.
19)王況, 王科盛, 左明健. 基於階次分析技術的行星齒輪箱非平穩振動信號分析. 振動與衝擊, 2016, 35(5): 140-145.
20)何倩鴻, 王科盛, 楊平. 可視化模態實驗課程的開發與實踐. 實驗科學與技術, 2015, 13(4): 22-25.
21)丁莉, 何平, 王科盛, 等. 振動力學實驗教學的探討. 實驗科學與技術, 2013, 11(6): 287-288.
22)王科盛, 凌丹. 國外公開課資源在理論力學課堂教學中的探索. 實驗科學與技術, 2014, 12(6): 98-100.
