王毅遠（Louis Ngai Yuen Wong），男，1977年6月生，1999年畢業於香港大學獲學士學位、2008年畢業於麻省理工大學獲博士學位。現為香港大學地球科學學院副教授，主要從事岩石斷裂力學，工程地質以及地下工程等方面的研究。
基本介紹
- 中文名：王毅遠
- 民族：漢族
- 出生地：中國香港
- 畢業院校：美國麻省理工大學
- 學位/學歷：博士
- 職務：副教授
教育經歷,工作經歷,研究方向,主要獲獎,學術任職,發表論文,
教育經歷
2002-2008年，麻省理工大學土木與環境工程系，獲博士學位；
1996-1999年，香港大學地球科學系，獲學士學位，一等榮譽學位。
工作經歷
2015年8月至今，香港大學地球科學系，任副教授及博士生導師；
2009年9月~2015年7月，新加坡南洋理工大學土木與環境工程系，任助理教授及博士生導師；
2008年4月~2009年6月，美國Camp Dresser & McKee (CDM)公司，任岩土工程師；
2007年10月~2008年4月，美國麻省理工大學土木與環境工程系，任博士後研究員；
2007年2月，韓國韓東科技大學訪問學者；
2003年7月，香港理工大學，任助理研究員；
1999年8月~2002年8月，香港特別行政區土木工程拓展署土力工程處，任見習工程地質工程師。
研究方向
岩石斷裂力學特性與數值模擬方法研究；工程地質；地下工程。
主要獲獎
2014年獲國際工程地質學會Richard Wolters科學成就獎；
2015年論文"Experimental Study on the Formation of Faults from En-echelon Fractures in Carrara Marble"獲得新加坡岩石力學與工程地質協會傑出論文獎；
2014年論文"Study of mechanical properties and fracturing processes of Carrara marble in dynamic Brazilian tests by two optical observation methods"獲得上海國際岩土會議（GeoShanghai International Conference）最佳論文獎；
2013年南洋教育獎（Nanyang Education Award）；
2002年麻省理工校長獎學金 （MIT Presidential Fellowship）獲得者；
1997,1998,1999年院長榮譽獲得者（Recipient of Dean’s Honors）。
學術任職
國際岩石力學學會成員；
新加坡岩石力學與工程地質學會會員；
美國岩石力學學會會員；
國際工程地質學位會員；
Engineering Geology (Elsevier) 編委；
Bulletin of Engineering Geology and the Environment 編委；
Rock Mechanics and Rock Engineering 編委；
Journal of Rock Mechanics and Geotechnical Engineering編委。
發表論文
截止2016年，共發表學術論文100餘篇，其中SCI收錄60餘篇，近五年谷歌學術引用1千多次，h-index=17，i10-index=30。
2016
65. Peng, J., Wong, L.N.Y.* and Teh, C.I. (available online) “Influence of grain size heterogeneity on strength and micro-cracking behavior of crystalline rocks”, Journal of Geophysical Research: Solid Earth. doi: 10.1002/2016JB013469
64. Wong, L.N.Y.*, Li Z., Kang, H.M. and Teh, C.I. (available online) “Dynamic loading of Carrara marble in a heated state”, Rock Mechanics and Rock Engineering.
63. Tang, Z.C., Jiao, Y.Y., Wong, L.N.Y.* and Wang, X.C. (2016) “Choosing appropriate parameters for developing empirical shear strength criterion of rock joint: review and new insights”. Rock Mechanics and Rock Engineering, 49(11), pp 4479-4490.
62. Cheng, Y., Wong, L.N.Y.* and Maruvanchery, V. (2016) “Transgranular crack nucleation in Carrara marble”. Rock Mechanics and Rock Engineering., 49(8), pp 3069-3082.
61. Wong, L.N.Y.*, Maruvanchery, V. and Liu, G. (2016) “Water effects on rock strength and stiffness degradation”, Acta Geotechnica, 11(4), pp 713-737.
60. Wong, L.N.Y.* and Maruvanchery, V. (2016) "Different lithological varieties of Bukit Timah Granite in Singapore - a preliminary comparison study on engineering properties", Rock Mechanics and Rock Engineering, 49(7), pp 2923-2935.
59. Tang, Z.C., Wong, L.N.Y.* and Liu, Q.S. (2016) “Influences of normal loading rate and shear velocity on the shear behavior of artificial rock joints”, Rock Mechanics and Rock Engineering. 49(6), pp 2165-2172.
58. Tang, Z.C. Huang, R.Q., Liu, Q.S., Wong, L.N.Y.* (2016) “Effect of contact state on the shear behavior of artificial joint”, Bulletin of Engineering Geology and the Environment, 75(2), pp 761-769.
57. Zou, C. and Wong, L.N.Y.* (2016) “Different compressive and tensile strength of moulded gypsum under various strain rates from quasi-static to dynamic regime”, Geotechnical Testing Journal., 39(4).
56. Zou, C. and Wong, L.N.Y.* (2016) “Size and geometry effects on the mechanical properties of Carrara marble under dynamic loadings”, Rock Mechanics and Rock Engineering., 49(5), pp 1695-1708.
55. Cheng, Y. and Wong, L.N.Y.* (2016) “Occurrence of foreshocks in large earthquakes of strike-slip rupturing”, Bulletin of the Seismological Society of America., 106(1), pp 213-224.
54. Tang, Z.C. and Wong, L.N.Y.* (2016) “New criterion for evaluating the peak shear strength of rock joints under different contact states”, Rock Mechanics and Rock Engineering, 49(4), pp1191-1199.
53. Tang, Z.C., Xia, C.C., Jiao, Y.Y. and Wong, L.N.Y.* (2016) “Closure model with asperity interaction in normal contact for rock joint”, International Journal of Rock Mechanics and Mining Sciences, 83, pp 170-173.
52. Zou, C., Wong, L.N.Y.*, Loo, J.J. and Gan, B.S. (2016) "Different mechanical and cracking behaviors of single-flawed brittle gypsum specimens under dynamic and quasi-static loadings", Engineering Geology, 201, pp 71-84.
51. Fang, Q.*, Tai, Q., Zhang, D. and Wong, L.N.Y. (2016) “Ground surface settlements due to construction of closely-spaced twin tunnels with different geometric arrangements”, Tunnelling and Underground Space Technology, 51, pp141-151.
2015
50. Cheng, Y., Wong, L.N.Y.* and Zou, C. (2015) “Experimental study on the formation of faults from en-echelon fractures in Carrara Marble”, Engineering Geology, 195, pp 312-326.
49. Wong, L.N.Y.*, Maruvanchery, V. and Oo, N.N. (2015) "Engineering properties of a low-grade metamorphic limestone", Engineering Geology, 193, pp 348-362.
48. Zhang, X.P., Wong, L.N.Y.*, Wang, S.J. (2015) "Effects of the ratio of flaw size to specimen size on cracking behavior", Bulletin of Engineering Geology and the Environment, 74(1), pp 181-193.
47. Gao, Y., Wong, L.N.Y.* and Gao, F. (2015) "Finite deformation analysis on sandstone subjected to thermo-hydro- mechanical (T-H-M) coupling", Rock Mechanics and Rock Engineering, 48(1), pp 159-177.
46. Gao, Y. and Wong, L.N.Y.* (2015) "A modified correlation between roughness parameter Z2 and JRC", Rock Mechanics and Rock Engineering, 48(1), pp 387-396.
45. Hou, Y. Fang, Q.*, Zhang D. and Wong, L.N.Y. (2015) "Excavation failure due to pipeline damage during shallow tunnelling in soft ground" Tunnelling and Underground Space Technology, 46, pp76-84.
44. Fang, Q.*, Zhang, D., Li, Q.Q. and Wong, L.N.Y. (2015) “Effects of twin tunnels construction beneath existing shield-driven twin tunnels", Tunnelling and Underground Space Technology, 45, pp128-137.
2014
43. Wu, Z. and Wong, L.N.Y.* (2014) "Extension of Numerical manifold method for coupled fluid flow and fracturing problems", International Journal for Numerical and Analytical Methods in Geomechanics, 38(16), pp1990-2008.
42. Li, H.Q. and Wong, L.N.Y.* (2014) "Numerical study on coalescence of pre-existing flaw pairs in rock-like material", Rock Mechanics and Rock Engineering, 47(6), pp 2087-2105.
41. Zhang, X.P. and Wong, L.N.Y.* (2014) "Choosing a proper loading rate for bonded-particle model of intact rock", International Journal of Fracture, 189(2), pp 163-179
40. Wu, Z. and Wong, L.N.Y.* (2014) "Investigating the effects of micro-defects on the dynamic properties of rock using Numerical Manifold Method", Construction & Building Materials, 72, pp72-82.
39. Wong, L.N.Y.* and Zhang, X.P. (2014) "Size effects on cracking behavior of flaw-containing specimens under compressive loading", Rock Mechanics and Rock Engineering. 47(5), pp1921-1930.
38. Wu, Z. and Wong, L.N.Y.* (2014) "Underground rockfall stability analysis using the numerical manifold method" Advances in Engineering Software, 76, pp69-85.
37. Wong, L.N.Y., Zou, C.*, Cheng, Y. (2014) "Fracturing and failure behavior of Carrara marble in quasi-static and dynamic Brazilian disc tests", Rock Mechanics and Rock Engineering., 47(4), 1117-1133.
36. Wong, L.N.Y.* and Jong, M.C. (2014) "Water saturation effects on the Brazilian tensile strength of gypsum and assessment of cracking processes using high-speed video" Rock Mechanics and Rock Engineering., 47(4), 1103-1115.
35. Yang, Y.*, Wong, L.N.Y., Chen, C. and Chen, T. (2014) "Using multi-temporal Landsat Imagery to monitor and model the influences of landscape pattern on urban expansion in a metropolitan region", Journal of Applied Remote Sensing, 8(1), 083639.
34. Wong, L.N.Y. and Wu, Z.* (2014) "Application of the numerical manifold method to model progressive failure in rock slopes", Engineering Fracture Mechanics, 119, pp1-20.
33. Zou, C. and Wong, L.N.Y.* (2014) "Experimental studies on cracking processes and failure in marble under dynamic loading" Engineering Geology, 173, pp19-31.
32. Fu, H., Wong, L.N.Y.*, Zhao, Y., Shen, Z., Zhang, C. and Li, Y. (2014) "Comparison of excavation damage zones resulting from blasting with nonel detonator and blasting with electronic detonator", Rock Mechanics and Rock Engineering, 47(2), pp809-816
31. Zhang, X.P. and Wong, L.N.Y.* (2014) "Displacement field analysis for cracking processes in bonded-particle model", Bulletin of Engineering Geology and the Environment, 73(1), pp13-21.
2013
30. Wu, Z., Wong, L.N.Y.* and Fan L. (2013) "Dynamic study on fracture problems in viscoelastic sedimentary rocks using the numerical manifold method", Rock Mechanics and Rock Engineering, 46(6), pp1415-1427.
29. Zhang, D., Fang, Q.*, Li, P. and Wong, L.N.Y. (2013) "Structural responses of secondary lining of high-speed railway tunnel excavated in loess ground", Advances in Structural Engineering, 16(8), pp1371-1380.
28. Zhang, X.P. and Wong, L.N.Y.* (2013) "Crack initiation, propagation and coalescence in rock-like material containing two flaws: a numerical study based on bonded-particle model approach", Rock Mechanics and Rock Engineering, 46(5), pp1001-1021.
27. Fan, L., Wong, L.N.Y.* and Ma, G.W. (2013) "Experimental investigation and modeling of viscoelastic behavior of concrete", Construction & Building Materials, 48, pp814-821.
26. Wong, L.N.Y. and Li, H.Q.* (2013) "Numerical study on coalescence of two pre-existing coplanar flaws in rock", International Journal of Solids and Structures, 50(22-23), pp3685-3706.
25. Li, D. and Wong, L.N.Y.* (2013) "Point load test on meta-sedimentary rocks and correlation to UCS and BTS", Rock Mechanics and Rock Engineering, 46(4), pp889-896.
24. Wu, Z. and Wong, L.N.Y.* (2013) "Modeling cracking behavior of rock mass containing inclusions using the enriched numerical manifold method", Engineering Geology, 162, pp1-13.
23. Wong, L.N.Y.*, Fang, Q. and Zhang, D. (2013) "Mechanical analysis of circular tunnels supported by steel sets embedded in primary linings", Tunnelling and Underground Space Technology. 37, pp80-88.
22. Zhang, D., Fang, Q., Hou, Y., Li, P. and Wong, L.N.Y.* (2013) "Protection of buildings against damages as a result of adjacent large-span tunneling in shallowly buried soft ground", Journal of Geotechnical and Geoenvironmental Engineering. 139(6), pp903-913.
21. Fang, Q., Zhang, D., Zhou, P. and Wong, L.N.Y.* (2013) "Ground reaction curves for deep circular tunnels considering the effect of ground reinforcement", International Journal of Rock Mechanics and Mining Sciences, 60, pp401-412
20. Fan, L. and Wong, L.N.Y.* (2013) "Stress wave transmission across a filled joint with different loading/unloading behavior", International Journal of Rock Mechanics and Mining Sciences, 60, pp227-234
19. Li, D. and Wong, L.N.Y.* (2013) "The Brazilian disc test for rock mechanics applications: review and new insights", Rock Mechanics and Rock Engineering, 46(2), pp269-287
18. Zhang, X.P. and Wong, L.N.Y.* (2013) "Loading rate effects on cracking behavior of flaw-contained specimens under uniaxial compression", International Journal of Fracture, 180(1), pp93-110.
17. Wu, Z. and Wong, L.N.Y.* (2013) "Elastic-plastic cracking analysis for brittle-ductile rocks using manifold method", International Journal of Fracture, 180(1), pp71-91.
16. Wong, L.N.Y.*, Li, D. and Liu, G. (2013) "Experimental studies on permeability of intact and singly-jointed meta-sedimentary rocks under confining pressure", Rock Mechanics and Rock Engineering, 46(1), pp107-121.
2012
15. Fan, L., Ma, G.W.* and Wong, L.N.Y. (2012) "Effective viscoelastic behavior of rock mass with double-scale discontinuities", Geophysical Journal International, 191(1), pp147-154.
14. Sun, H.Y., Wong, L.N.Y., Shang, Y.Q.*, Yu, B.T. and Wang, Z.L. (2012) "Experimental studies of groundwater pipe flow network characteristics in gravelly soil slopes", Landslides, 9(4), pp475-483.
13. Zhang, X.P. and Wong, L.N.Y.* (2012) "Cracking processes in rock-like material containing a single flaw under uniaxial compression – a numerical study based on parallel bonded-particle model approach", Rock Mechanics and Rock Engineering, 45(5), pp711-737.
12. Li, H. and Wong, L.N.Y.* (2012) "Influence of flaw inclination angle and loading condition on crack initiation and propagation", International Journal of Solids and Structures, 49(18), pp2482-2499.
11. Fang, Q., Zhang, D.L. and Wong, L.N.Y.* (2012) "Shallow tunnelling method (STM) for subway station construction in soft ground", Tunnelling and Underground Space Technology, 29, pp10-30
# The above paper has been listed as the top 25 papers in Tunnelling and Underground Space Technology for the year 2012.
10. Li, D., Wong, L.N.Y.*, Liu, G. and Zhang, X.P. (2012) "Influence of water content and anisotropy on the strength and deformability of low porosity meta-sedimentary rocks under triaxial compression", Engineering Geology, 126, pp46-66
9. Wu, Z. and Wong, L.N.Y.* (2012) "Frictional crack initiation and propagation analysis using numerical manifold method", Computers and Geotechnics, 39, pp38-53.
# The above paper has been listed as the top 25 papers in Computers and Geotechnics for the year 2012.
2011
8. Zhang, X.P., Wong, L.N.Y.*, Wang, S.J. and Han G.Y. (2011) "Engineering properties of quartz mica schist", Engineering Geology, 121(3-4), pp135-149.
7. Fang, Q., Zhang, D. and Wong, L.N.Y.* (2011) "Environmental risk management for a cross interchange subway station construction in China", Tunnelling and Underground Space Technology, 26(6), pp750-763
# The above paper has been listed as the top 25 papers in Tunnelling and Underground Space Technology for the years 2011 and 2012.
2010
6. Sun, H.Y., Wong, L.N.Y.*, Shang, Y.Q., Shen, Y.J. and Lu, Q. (2010) "Evaluation of drainage tunnel effectiveness in landslide control", Landslides, 7(4), pp445-454.
5. Sun, H.Y., Wong, L.N.Y., Shang, Y.Q.*, Lu, Q. and Zhan, W. (2010) "Systematic monitoring of the performance of anchor systems in fractured rock masses", International Journal of Rock Mechanics and Mining Sciences, 47(6), pp1038-1045.
2009
4. Wong, L.N.Y. and Einstein, H.H.* (2009) "Using high speed video imaging technique in the study of cracking and coalescence processes in rock", Geotechnical Testing Journal, 32, 2, pp164-180.
3. Wong, L.N.Y. and Einstein, H.H.* (2009) “Systematic Evaluation of Cracking Behavior in Specimens Containing Single Flaws under Uniaxial Compression”, International Journal of Rock Mechanics and Mining Sciences, 46(2), pp239-249.
2. Wong, L.N.Y. and Einstein, H.H.* (2009) “Crack Coalescence in Molded Gypsum and Carrara Marble: Part 1 – Macroscopic Observations and Interpretation”, Rock Mechanics and Rock Engineering, 42(3), pp475-511.
1. Wong L.N.Y. and Einstein, H.H.* (2009) “Crack Coalescence in Molded Gypsum and Carrara Marble: Part 2 – Microscopic Observations and Interpretation”, Rock Mechanics and Rock Engineering, 42(3), pp513-545.
Discussion in refereed journals (* Corresponding Author)
3. Li, D.* and Wong, L.N.Y. (2013) Reply to Comment by Saffet Yagiz on “Point Load Test on Meta-Sedimentary Rocks and Correlations to UCS and BTS”, Rock Mechanics and Rock Engineering, 46(4), pp913-915.
2. Li, D. and Wong, L.N.Y.* (2012) "Discussion on "Predicting the Uniaxial Compressive and Tensile Strengths of Gypsum Rock by Point Load Testing" by Heidari M, Khanlari G, Torabi Kaveh M, Kargarian S.", Rock Mechanics and Rock Engineering, 45, pp1127-1130.
1. Wong, L.N.Y. and Whittle, A.J.* (2005) "Discussion on "A Non-linear Approach for Settlement Prediction of Single Pile and Pile Groups under Vertical Load" by Castelli, F. and Motta, E.", Geotechnical Engineering, Proceedings of the Institution of Civil Engineers, 158, pp175-177.
Non-SCI journals (* Corresponding Author)
6. Jiang, Y., Wong, L.N.Y.*, Ren, J. (2015) “A numerical test method of California bearing ratio on graded crushed rocks using particle flow modeling”, Journal of Traffic and Transportation Engineering (English Edition), 2(2), pp107-115.
5. Wong, L.N.Y.* (2013) "A review of field occurrence of crack types and crack coalescence in rocks", Applied Mechanics and Materials. Vols. 405-408, pp191-202.
4. Cai, J.*, Wong, L.N.Y. and Yan, H.W. (2012) "Dynamic response of airport concrete pavement to impact loading", Advanced Materials Research, 594-597, pp1395-1401.
3. Fang, Q.*, Zhang, D., Wong, L.N.Y., Li, P. and Chen, T. (2011) "Study of contact pressure between primary lining and secondary lining for tunnels of passenger dedicated lines", Chinese Journal of Rock Mechanics and Engineering, 30 (suppl. 2), pp3377-3385 (in Chinese).
2. Li, D.Y.*, Li, X.B., Li C.C. and Wong, L.N.Y. (2011) "Experimental and numerical Studies on the mechanical response of plate-shape granite samples containing prefabricated holes under uniaxial compression", Chinese Journal of Rock Mechanics and Engineering, 30(6), pp1198-1206 (in Chinese).
1. Fang, Q.*, Zhang, D.L., Wong, L.N.Y., Li, P.F. and Li, Q.Q. (2011) "Study on circular tunnel failure modes using model test", Chinese Journal of Rock Mechanics and Engineering, 30(3), pp564-571 (in Chinese).
Conferences
37. Wong, L.N.Y., Maruvanchery, V. and Oo, N.N. (2016) “Comprehensive Laboratory Study of a Slightly Metamorphosed Limestone”, 9th Asian Rock Mechanics Symposium, Bali, Indonesia, 18-20 October, 2016.
36. Wong, L.N.Y. and Maruvanchery, V. (2016) “Water effects on rocks”, EUROCK 2016, Cappadocia, Turkey, 29-31 August, 2016.
35. Wong, L.N.Y. (2016) “Experimental and numerical studies on earthquake shear rupture generation”, 18th International Conference on Earthquake and Geological Engineering, Tokyo, Japan, 26-27 May, 2016.
34. Wong, L.N.Y. (2016) “Physical and numerical modeling of an earthquake shear rupture”, 7th Guangdong-Hong Kong-Macao Seminars on Earthquake Science and Technology, Hong Kong Observatory, 7-8 April 2016.
33. Wong, L.N.Y. and Maruvanchery, V. (2016) “Engineering properties of different lithological varieties of a Singapore granite”, 18th International Conference on Civil and Earth Science Engineering, Singapore, 18(3), 3-4 March, 2016, p213.
32. Zhang, X.P., Wong, L.N.Y. and Li, X. (2015) “Particle size effect on cracking behavior in bonded-particle model”, Paper 432, The 13th International Congress on Rock Mechanics, Montreal, Canada, 10-13 May, 2015.
31. Wu, Z. and Wong, L.N.Y. (2015) “Modeling the progressive failure in rock slopes based on the fracture mechanics approach using the numerical manifold method”, Paper 284, The 13th International Congress on Rock Mechanics, Montreal, Canada, 10-13 May, 2015.
30. Wong, L.N.Y. and Li, Z. (2015) “High temperature effects on granitic rocks”, 7th International Conference on Mining Science and Technology (ICMST 2015), Xuzhou, China, 26-29 April, 2015, pp362-365.
29. Wong, L.N.Y. (2015) "Upgrading the rock mechanics laboratory at the Nanyang Technological University, Singapore", Vietrock2015, Hanoi, Vietnam, 12-13 Mar, 2015, pp98-104.
28. Wong, L.N.Y. and Li, H.Q. (2015) "Modelling the coalescence of coplanar fractures in rock by AUTODYN analysis", Seoul International Conference on Engineering and Applied Science (2015 SICEAS), Seoul, Korea, 8-10 Jan, 2015.
27. Cheng, Y. and Wong, L.N.Y. (2014) "Evolution of en-echelon flaws to a fault in marble under uniaxial compression" ARMS8, 2014 ISRM International Symposium, 8th Asian Rock Mechanics Symposium, Sapporo, Japan, 14-16 October, 2014, RP3-3.
26. Wong, L.N.Y. and Jong, M.C. (2014) "Study of the water effects on the tensile strength and cracking processes of gypsum", XII IAEG Congress, Torino, 15-19 September 2014. In Engineering Geology for Society and Territory-Volume 5, pp 1263-1267. Springer International Publishing.
25. Gao, Y. and Wong, L.N.Y. (2014) "A re-examination of the Joint Roughness Coefficient (JRC) and its correlation with the roughness parameter Z2", 48th US Rock Mechanics/ Geomechanics Symposium, Minneapolis, MN, June 1–4, 2014. ARMA 14-7104.
24. Zou, C. and Wong, L.N.Y. (2014) "Study of mechanical properties and fracturing processes of Carrara marble in dynamic Brazilian tests by two optical observation methods", GeoShanghai International Conference 2014, Shanghai, China, May 26-28, 2014.
23. Wong, L.N.Y. (2014) "High temperature effects on underground rocks " APCLSE-261, 2014 Asia-Pacific Conference on Life Science and Engineering, Sanya, Hainan Island, China, Feb. 21-23, 2014, pp24-25. (abstract only)
22. Wong, L.N.Y. (2013) "A quick approach for differentiating natural rock joints from artificially damaged rock surfaces" HKICEAS-793, The 2nd Hong Kong International Conference on Engineering and Applied Science (HKICEAS), Hong Kong, December 19-21, 2013, pp325-329.
21. Wong, L.N.Y. (2013) "Determination of normal joint spacing from apparent joint spacing measurements", International Symposium & 9th Asian Regional Conference of IAEG, Beijing, China, September 24–25, 2013.
20. Cheng, Y., Wong, L.N.Y. and Zou, C. (2013) "Evolution of en-echelon flaws to a shear rupture in moulded gypsum under uniaxial compression", 47th US Rock Mechanics/ Geomechanics Symposium, San Francisco, CA, June 23–26, 2013. ARMA 13-296.
19. Wong, L.N.Y. and Ponti, M.A. (2012) "Constraints, design and implementation of rock discontinuity survey for underground engineering purposes", ACUUS 2012 Singapore.
18. Li, H.Q. and Wong, L.N.Y. (2012) "Numerical study on the cracking processes in rocks under different loading rates". 7th Asian Rock Mechanics Symposium, an ISRM regional symposium, Seoul, Korea, October 15-19, 2012, pp466-476.
17. Wong, L.N.Y. and Zou, C. (2012) "Cracking processes in rocks under dynamic loading". 7th Asian Rock Mechanics Symposium, an ISRM regional symposium, Seoul, Korea, October 15-19, 2012, pp485-494.
16. Wong, L.N.Y. Li, D., Liu, G. and Zhang, X.P. (2012) "Triaxial testings of meta-sedimentary rocks and generalized Hoek-Brown failure criterion of rock mass", AOGS-AGU (WPGM) Joint Assembly, Singapore, August 13-17, 2012.
15. Wu, Z. and Wong, L.N.Y. (2012) "2D frictional crack initiation and propagation analysis using the numerical manifold method", 46th US Rock Mechanics/ Geomechanics Symposium, Chicago, IL, June 24-27, 2012. ARMA 12-338.
14. Zou, C., Wong, L.N.Y. and Cheng, Y. (2012) "The strength and crack behaviour of molded gypsum under high strain rate". 46th US Rock Mechanics/ Geomechanics Symposium, Chicago, IL, June 24-27, 2012. ARMA 12-339.
13. Wong, L.N.Y. and Zhang X.P. (2012) "Crack coalescence study based on the bonded-particle model approach", EUROCK 2012, Stockholm, 28-30 May, 2012.
12. Wong, L.N.Y. and Liu, G. (2012) "Discussion of water content and related physical properties of rock", EUROCK 2012, Stockholm, 28-30 May, 2012.
11. Li, D-Y, Li, X-B, Liu, Z-X, Ma C-D and Wong, L.N.Y. (2011) "Buckling failure of highly-stressed hard rocks surrounding deep underground openings and confining effects of backfilling material" The 12th International Congress on Rock Mechanics, Beijing, China, 16th - 21st October, 2011, pp265-269.
10. Zhang, X.P., Wong, L.N.Y. and Wang, S.J. (2011) "Back-analysis of schistose rock mass strength parameters based on displacement monitoring data". The 12th International Congress on Rock Mechanics, Beijing, China, 16th - 21st October, 2011, pp345-349.
9. Wong, L.N.Y. and Li, H.Q. (2011) "Initiation and propagation of tensile wing cracks and anti-wing cracks from a pre-existing open flaw under compression". The 12th International Congress on Rock Mechanics, Beijing, China, 16th - 21st October, 2011, pp877-880.
8. Li, H.Q. and Wong, L.N.Y. (2011) "Initiation and propagation of tensile wing cracks and horsetail cracks from a pre-existing flaw under compression". 45th US Rock Mechanics/ Geomechanics Symposium, San Francisco, CA, June 26–29, 2011. ARMA 11-341.
7. Sham, W.L., Wong, L.N.Y., Bai, W.Q. and Tiong, R.L.K. (2011) “Geological risk assessment in underground construction”. Modern Methods and Advances in Structural Engineering and Construction, ISEC-6, Zurich, June 21-26, 2011. S1-R02.
6. Wong, L.N.Y. and Liu, G. (2010) "An improved K-means clustering method for the automatic grouping of discontinuity sets". 44th US Rock Mechanics Symposium and 5th U.S.-Canada Rock Mechanics Symposium, Salt Lake City, UT June 27–30, 2010. ARMA 10-265.
5. Wong, L.N.Y. and Einstein, H.H. (2009) "Process Zone Development Associated with Cracking Processes in Carrara Marble". The 9th International Conference on Analysis of Discontinuous Deformation “New Developments and Applications, Nanyang Technological University, Singapore, 25-27 November 2009, pp581-588.
4. Wong, L.N.Y. and Einstein, H.H. (2007) "Crack Coalescence in Molded Gypsum and Carrara Marble". AGU Fall Meeting, San Francisco, December 10-14, 2007. (abstract only)
3. Wong, L.N.Y. and Einstein, H.H. (2007) "Coalescence Behavior in Carrara Marble and Molded Gypsum Containing Artificial Flaw Pairs Under Uniaxial Compression". 1st Canada-U.S. Rock Mechanics Symposium, Vancouver, British Columbia, Canada, May 27-31, 2007.
2. Wong, L.N.Y. and Einstein, H.H. (2006) "Comparison of Coalescence Behavior Between Natural Outcrops and Laboratory Testing Specimens". 2006 GSA Annual Meeting, Philadelphia, Oct 22-25, 2006. (abstract only)
1. Wong, L.N.Y. and Einstein, H.H. (2006) "Fracturing Behavior of Prismatic Specimens Containing Single Flaws". Golden Rocks 2006, The 41st U.S. Symposium on Rock Mechanics (USRMS): "50 Years of Rock Mechanics - Landmarks and Future Challenges, Golden, Colorado, June 17-21, 2006.
Theses and Reports
9. Wong, L.N.Y. and Zou, C.(2013) "Experimental Study on the Cracking Processes in Rocks under Dynamic Loading", Civil Engineering Research, No. 26/2013, School of Civil and Environmental Engineering, Nanyang Technological University, Singapore, pp88-89. ISSN 0219-0370.
8. Wong, L.N.Y. and Li, H.Q. (2013) "Numerical Study on the Cracking Processes in Rocks under Different Loading Rates", Civil Engineering Research, No. 26/2013, School of Civil and Environmental Engineering, Nanyang Technological University, Singapore, pp97-98. ISSN 0219-0370.
7. Wong, L.N.Y. and Wu, Z. (2012) "Frictional crack initiation and propagation analysis using the numerical manifold method", Civil Engineering Research, No. 24/2011, School of Civil and Environmental Engineering, Nanyang Technological University, Singapore, pp96-100. ISSN 0219-0370.
6. Wong, L.N.Y. and Zhang, X.P. (2011) "P-wave velocity measurements in sedimentary rocks ", Civil Engineering Research, No. 24/2011, School of Civil and Environmental Engineering, Nanyang Technological University, Singapore, pp104-107. ISSN 0219-0370.
5. Wong, N.Y. (2008) "Crack Coalescence in Molded Gypsum and Carrara Marble", PhD Thesis, Massachusetts Institute of Technology, Cambridge, USA.
4. Wong, N.Y. (2000) "Engineering Geology Graduate Geological Mapping Project", Tai Tam Reservoir Area, Hong Kong SAR, PR12/2000, Geotechnical Engineering Office, Hong Kong SAR.
3. Wong, N.Y. (2000) "Mapping of Superficial Deposits in the Tai Po Area", PR9/2000, Geotechnical Engineering Office, Hong Kong SAR.
2. Wong, N.Y. (2000) "Petrological study of Dynamic Metamorphism in the Tsing Shan Granite, NW New Territories, Hong Kong SAR", PR3/2000, Geotechnical Engineering Office, Hong Kong SAR.
1. Wong, N.Y. (1999) "Engineering Geology Assessment at Mount Davis Service Reservoir", BSc Thesis, University of Hong Kong, Hong Kong SAR.
