王廷梅 女 博士生導師 中科院蘭州化學物理研究研究員
教育背景,工作經歷,研究領域,代表論著,
教育背景
2000-07--2003-06 中科院蘭州化學物理研究所固體潤滑國家重點實驗室 博士
1995-07--1998-06 蘭州大學化學系有機化學專業 碩士
1988-07--1992-06 西北大學化工系 學士
工作經歷
1988.7-1992.7 西北大學化工系有機化工專業 讀本科
1992.7-1994.6 蘭化公司石油化工廠高壓聚乙烯車間 助理工程師
1994.7-1995.6 蘭化公司石油化工廠設計室 工程師
1995.7-1998.7 蘭州大學化學系有機化學專業 讀碩士
1998.7-2000.7 蘭化公司設計院 工藝設計師
2000.7-2003.7 中科院蘭州化學物理研究所固體潤滑室 讀博士
2003.10-至今 蘭州化物所潤滑中心602組 副研、研究員
2011.7.-至今 博士生導師
研究領域
多孔聚合物複合材料的設計製備
聚合物複合材料的設計研製
有機/無機納米複合材料的製備與性能研究
高強度纖維增強複合材料的研製
聚合物複合材料的設計研製
有機/無機納米複合材料的製備與性能研究
高強度纖維增強複合材料的研製
代表論著
(1)Low dielectric, nanoporous fluorinated polyimide films prepared from PCL-PI-PCL 3 triblock copolymer using retro-Diels–Alder reaction,Journal of Colloid and Interface Science,2013
(2)Controllable low dielectric porous polyimide films templated by silica microspheres: Microstructure, formation mechanism, and properties,Journal of Colloid and Interface Science,2013
(3)Studies on wettability, mechanical and tribological properties of the polyurethane composites filled with talc,Applied Surface Science ,2012
(4)Preparation and tribological properties of graphene oxide/nitrile rubber nanocomposites,Journal of Materials Science,2012,
(5)Phenylphosphine oxide-containing aromatic polyamide films with high atomic oxygen erosion resistance,Polymer Degradation and Stability,2012
(6)Damping, thermal, and mechanical properties of carbon nanotubes modified castor oil-based polyurethane/epoxy interpenetrating polymer network composites,Materials and Design,2012
(7)Damping, Thermal, and Mechanical Properties of Polycaprolactone-Based PU/EP Graft IPNs: Effects of Composition and Isocyanate Index,Journal of Macromolecular Science , Part B: Physics,2012
(8)Thermoresponsive PNIPAAm-modified cotton fabric surfaces that switch between superhydrophilicity and superhydrophobicity,Applied Surface Science,2012
(9)In Situ Synthesis and Properties of PMR PI/SiO2 Nanocomposites,Journal of Applied Polymer Science,2012
(10)Influence of the Hard Segment Content on the Mechanical and Tribological Properties of the Polyurethane Modified by Hydroxyl-Terminated Polydimethylsiloxane Under Different Lubricated Conditions,Polymer Composites,2012
(2)Controllable low dielectric porous polyimide films templated by silica microspheres: Microstructure, formation mechanism, and properties,Journal of Colloid and Interface Science,2013
(3)Studies on wettability, mechanical and tribological properties of the polyurethane composites filled with talc,Applied Surface Science ,2012
(4)Preparation and tribological properties of graphene oxide/nitrile rubber nanocomposites,Journal of Materials Science,2012,
(5)Phenylphosphine oxide-containing aromatic polyamide films with high atomic oxygen erosion resistance,Polymer Degradation and Stability,2012
(6)Damping, thermal, and mechanical properties of carbon nanotubes modified castor oil-based polyurethane/epoxy interpenetrating polymer network composites,Materials and Design,2012
(7)Damping, Thermal, and Mechanical Properties of Polycaprolactone-Based PU/EP Graft IPNs: Effects of Composition and Isocyanate Index,Journal of Macromolecular Science , Part B: Physics,2012
(8)Thermoresponsive PNIPAAm-modified cotton fabric surfaces that switch between superhydrophilicity and superhydrophobicity,Applied Surface Science,2012
(9)In Situ Synthesis and Properties of PMR PI/SiO2 Nanocomposites,Journal of Applied Polymer Science,2012
(10)Influence of the Hard Segment Content on the Mechanical and Tribological Properties of the Polyurethane Modified by Hydroxyl-Terminated Polydimethylsiloxane Under Different Lubricated Conditions,Polymer Composites,2012