汪炳叔

汪炳叔，男，漢族，1982年4月出生，福建泉州人，中共黨員，重慶大學博士學位，福州大學材料科學與工程學院副教授、碩士生導師。

基本介紹

• 中文名：汪炳叔
• 國籍：中國
• 民族：漢族
• 出生地：福建泉州
• 畢業院校：重慶大學
• 學位/學歷：博士
• 專業方向：材料科學與工程

人物簡介

2000/9-2004/6，重慶大學，材料科學與工程學院，本科

2006/9-2012/6，重慶大學，材料科學與工程學院，博士

2012/8-2016/6， 福州大學，材料科學與工程學院，講師，碩士生導師

2016/6-至今， 福州大學，材料科學與工程學院，副教授，碩士生導師

研究方向

微觀組織及織構表征技術（EBSD，TEM）; 金屬材料（鎂合金、鈦合金、銅合金、不鏽鋼等）塑性變形機理; 金屬材料加工過程微觀組織與織構控制; 鎂/鈦合金孿晶及相變晶體學計算，; 晶體塑性模擬

科研項目

主持項目：

1. 中國博士後科學基金一等資助項目，2017-2019，在研，主持

2. 福建省自然科學基金面上項目，2016J01215，基於多向變形的鎂合金孿生變體選擇機制研究，2016-2019，已結題，主持

3. 國家自然科學基金青年項目，51301040，基於室溫多向高速預變形的鎂合金微觀組織及織構演變規律研究，2014-2016，已結題，主持

4.2012-2015 福州大學人才基金

5. 2013-2015 福州大學科技發展基金

參與項目：

1. 國家自然科學基金面上項目，高強韌CNTs/Al複合材料仿生構型設計與製備基礎研究，2019-2022, 在研，參與

2. 國家自然科學基金青年項目，51601039，Cu-Nb微觀複合線材的界面行為研究，2017-2019，在研，參與

3. 國家自然科學基金重點項目，51131009，時效鎂合金的沉澱析出與強韌化機理研究，2012-2016，已結題，參與

科研成果

發表論文：

[1] Bingshu Wang*, Jingjing Shi, Peng Ye, Liping Deng, Ning Guo, Chen Wang, Junfeng Chen, Qiang Li. Analysis of {10–12} twinning variants’ selection behavior during multi-directional compression in Mg–3Al–1Zn magnesium alloy. Journal of Materials Science, 2019, 54(13):9797-9808

[2]Liping Deng, Bingshu Wang, Ke Han, Rongmei Niu, Hongliang Xiang, Karl T. Hartwig, Xiaofang Yang, Response of microstructure to annealing in in situ Cu–Nb microcomposite, Journal of Materials Science, 2019, 54: 840-850

[3]Zhimin Zhang, Qingshan Dong, Bo Song, Hong He, Linjiang Chai, Ning Guo,Bingshu Wang and Zhongwen Yao, Effect of Shear Strain Rate on Microstructure and Properties of Austenitic Steel Processed by Cyclic Forward/Reverse Torsion, Materials, 2019, 12: 506

[4]Bingshu Wang*, Jingjing Shi, Peng Ye, Liping Deng, Chen Wang, Junfeng Chen, Xiaohua Yang, Qiang Li, In-situ investigation on nucleation and propagation of {10-12} twins during uniaxial multi-pass compression in an extruded AZ31 Mg alloy, Materials Science and Engineering: A, 2018, 731: 71-79

[5]Chen Wang, Hui Zheng, Hao Ding, Xiaocao Hu, George C. Hadjipanayis, Bingshu Wang, Junfeng Chen, Xigui Cui, Effects of B addition on the microstructure and magnetic properties of Fe-Co-Mo alloys, Journal of Alloys and Compounds, 2018, 766:649-655

[6]Chen Wang, Kui Wang, Hao Ding, Xiaobo Xiao, Bingshu Wang, JunFeng Chen, Weilin Zhang, Lei Zhao, Xing Yu, Effects of ammonium tungstate on the properties of insulating coating for grain-oriented silicon steel. Materials Science & Engineering B, 2018, 228:109-116

[7]Jingjing Shi, Kaixuan Cui, Bingshu Wang*, Liping Deng, Chen Wang, Zeren Xu, Qiang Li, Effect of Initial Microstructure on Static Recrystallization of Mg-3Al-1Zn Alloy, Materials Characterization, 2017, 129: 104-113

[8]Chen Wang, Hao Ding, BingShu Wang*, Kui Wang, Jingjing Shi, Junfeng Chen, Effects of Deformation Texture and Twins on the Corrosion Resistance of Rolled AZ31 Mg Alloy Under 5% Uniaxial Compression, Acta Metallurgica Sinica, 2017, 30: 921-930

[9]Deng LIping, Wang Bingshu, Xiang Hongliang, Yang Xiaofang, Ke Han. Effect of Annealing on the Microstructure and Properties of in-situ Cu–Nb Microcomposite Wires.Acta Metallurgica Sinica. 2016; 29: 668-673

[10]Guo Ning, Song Bo, Yu Hongbing, Xin Rrelong, Wang Bingshu, Liu Tingting. Enhancing tensile strength of Cu by introducing gradient microstructures via a simple torsion deformation. Materials & Design. 2016; 90:545-550

[11] Deng Liping, Ke Han,Wang Bingshu, Yang Xiaofang, Liu Qing.Thermal stability of Cu–Nb microcomposite wires.Acta Materialia.2015, 101:181-188

[12] 汪炳叔*, 鄧麗萍, Adrien Chapuis, 郭寧, 李強. AZ31鎂合金在平面應變壓縮過程中的孿生行為研究.金屬學報. 2015: In press （DOI: 10.11900/0412.1961.2015.00215）

[13] Yao Jinyi, Wang Bingshu*, Deng Liping, Adrien Chapuis, Li Qiang and Liu Qing. Simulation of texture evolution and deformation mechanism in Mg-3Al-1Zn alloy during uniaxial compression.Science China Technological Sciences.2015; 58(12): 2052-2059

[14] Wang Bingshu*, Deng Liping, Adrien Chapuis, Guo Ning, Xu Zeren and Li Qiang. Relationship between textures and deformation modes in Mg–3Al–1Zn alloy during uniaxial tension.Materials Characterization.2015; 108: 42-50

[15] Guo Ning, Song Bo, Wang Bingshu and Liu Qing. Influence of Torsion Deformation on Textures of Cold Drawing Pearlitic Steel Wires.Acta Metallurgica Sinica. 2015; 28: 707-714

[16] Wang Bingshu*, Deng Liping, Guo Ning, Xu Zeren and Li Qiang. EBSD analysis of {10–12} twinning activity in Mg–3Al–1Zn alloy during compression.Materials Characterization.2014; 98: 180-185

[17] Guo Ning, Liu Tingting, Luan Baifeng, Wang Bingshu and Liu Qing. Dislocation density and configuration in fully pearlitic steel during wire drawing.Materials Research Innovations. 2014; 18: s249-254

[18] Chapuis Adrien, Wang Bingshu and Liu Qing. A comparative study between uniaxial compression and plane strain compression of Mg–3Al–1Zn alloy using experiments and simulations.Materials Science and Engineering: A. 2014; 597: 349-358

[19] Guo Ning, Luan Baifeng, Wang Bingshu and Liu Qing. Microstructure and texture evolution in fully pearlitic steel during wire drawing,Science China-Technological Sciences,2013. 56(5): 1139-1146.

[20] Wang Bingshu, Xin Renlong, Huang Guangjie and Liu Qing. Strain rate and texture effects on microstructural characteristics of Mg-3Al-1Zn Mg alloy during compression.Scripta Materialia.2012. 66 (5): 239-242.

[21] Wang Bingshu, Xin Renlong, Huang Guangjie and Liu Qing. Effect of crystal orientation on the mechanical properties and strain hardening behavior of magnesium alloy AZ31 during uniaxial compression.Materials Science and Engineering A,2012. 534:588-593.

[22] Wang Bingshu, Xin Renlong, Huang Guangjie and Liu Qing. Hot-deformation behaviors of AZ31 alloys with different initial states.Transactions of Nonferrous Metals Society of China.2008. 18: 145-149.

[23] Xin Renlong, Wang Bingshu, Huang Guangjie and Liu Qing. Effects of strain rate and temperature on microstructure and texture for AZ31 during uniaxial compression.Transactions of Nonferrous Metals Society of China. 2010. 20：594-598.

[24] Xin Renlong, Wang Bingshu, Huang Guangjie and Liu Qing. Examination of dynamic recrystallization during compression of AZ31 magnesium.Science in China Series E-Technological Sciences. 2009. 52: 176-179.

[25] M.Y. Wang, Xin Renlong, Wang Bingshu and Liu Qing. Effect of initial texture on dynamic recrystallization of AZ31 Mg alloy during hot rolling.Materials Science and Engineering A.2011, 528: 2941–2951.

[26] 汪炳叔；辛仁龍；黃光傑；陳興品；劉慶。EBSD分析技術在鎂合金晶粒尺寸表征中的套用。電子顯微學報。2009。28(1)：20-22。

[27] 辛仁龍；汪炳叔；陳興品；黃光傑；劉慶。形變鎂合金微觀組織與織構的EBSD研究。電子顯微學報。2008。27(6)：495-498。

[28] 肖梅；周正；黃光傑；汪炳叔。AZ31鎂合金的熱變形行為及加工圖。機械工程材料。2010。34(4)：18-21。

[29] 曾柯；辛仁龍；李波；汪炳叔；黃光傑；劉慶。EBSD技術在稀土變形鎂合金微觀表征中的套用。電子顯微學報。2010。29(1)：720-723。