科研項目
(1)低溫下納米/聚氨酯複合絕熱泡沫的相變傳熱傳質機理分析及熱膨脹研究,國家自然科學基金項目,2012.01-2014.12,主持人
(2)真空絕熱板用於北方採暖區建築維護結構的傳熱性能研究,遼寧省自然科學基金項目,2013.08-2016.07,主持人
(3)新一代聚氨酯泡沫低溫下熱質耦合的傳熱特性及模型研究,遼寧省博士啟動基金項目,2010.10-2012.12,主持人
(4)環保聚氨酯泡沫低溫熱導率及絕熱機理分析,遼寧省教育廳高等學校科研項目計畫,2008.10-2010.01,主持人
(5)真空絕熱板用於漁船液化天然氣燃料儲罐的低溫絕熱性能研究,遼寧省優秀人才支持計畫項目,2013.07-2016.06,主持人
(6)低溫下聚氨酯泡沫平均表觀熱導率的研究,大連海洋大學人才引進項目,2008.09-2010.09,主持人
(7)真空絕熱板中熱質耦合傳遞現象研究,大連海洋大學首批青年英才工程項目,2010.12-2013.12,主持人
學術論文
(1)C.G. Yang, L. Xu, L.Q. Zhang, N. Chen, An adiabatic calorimeter for heat capacity measurements of polyurethane foam with blowing agent of HFC245fa in the temperature range 60-290 K, Energy Conversion and Management, 2006, 47(9-10): 1124-1132(SCI)
(2)C.G. Yang, L. Xu, N. Chen, Thermal expansion of polyurethane foam at low temperature, Energy Conversion and Management, 2007, 48: 481-485(SCI)
(3)C.G.Yang, L.Xu, J. Wang, F.L.Shi, Outgassing of Rigid Open-celled Polyurethane Foam Used in Vacuum Insulation Panels Under Vacuum Condition, Journal of Cellular Plastics, 2007, 43(1): 17-30(SCI)
(4)C.G.Yang, L.Xu, The mean apparent thermal conductivity of a newly improved polyurethane foam with blowing agent of HFC-245fa under low temperature,《Proceedings of the 4th International Conference on Cryogenics and Refrigeration》, 2008: 328-331(ISTP)
(5)Chun Guang YANG, Lie XU, A Review of Maintenance of Vacuum inside Vacuum Insulation Panels, Journal of the Vacuum Society ofJapan, 2010, 53(1): 37-40
(6)C.G.Yang,N.Zhang, X.Gao, THE LAYERED INSULATION MODEL AND MEAN APPARENT THERMAL CONDUCTIVITY OF AN ENVIRONMENTAL FRIENDLY POLYURETHANE FOAM AT LOW TEMPERATURES, Proceedings of 2009 US-EU-China Thermophysics Conference - Renewable Energy(EI)
(7)C.G.Yang,X.Gao, X.Shao,A Review of Vacuum Degradation Research and the experimental outgassing research of the core material PU foam on Vacuum Insulation Panels, Physics Procedia, 2012,32:239-244
(8)Chunguang Yang, Xia Gao, , Xue Shao, Finite-element Thermal Analysis of Thermal Bridge of Vacuum Insulation Panels Based on Temperature-dependent Laminate Properties, Physics Procedia, 2012,32:658-663
(9)N.Chen,C.G.Yang, L.Xu,Optimal vector analysis of the phase shifter in the pulse tube refrigerator, PROCEEDINGS OF THE 20th INTERNATIONAL CRYOGENIC ENGINEERING CONFERENCE, 2005: 261-264(EI)
(10)N.Chen,C.G.Yang, L.Xu, Analysis of inertance tube in the pulse tube refrigerator, PROCEEDINGS OF THE 20th INTERNATIONAL CRYOGENIC ENGINEERING CONFERENCE, 2005(EI)
(11)Zhang Li-Qiang,Yang Chun-Guang, Xu-Lie,Experimental on heat transfer performance of the umbrella-plate falling film evaporator(Chinese),《Chemical Engineering》, 2006, 34(6): 17-20(EI)
(12)楊春光,肖尤明,陳楠,真空下非金屬材料放氣模型與研究綜述,《真空》, 2006, 43(3): 48-50
(13)楊春光,徐烈,張衛林,一種高效絕熱技術——真空絕熱板,《真空》, 2006, 43(1): 48-50
(14)楊春光,肖尤明,李志偉,聚氨酯泡沫液氮溫度下熱導率的測量,《低溫與超導》, 2004, 32(2): 25-28
(15)楊春光,徐烈,李兆慈,聚氨酯泡沫低溫下平均線膨脹係數的測定,《低溫與超導》, 2004, 32(3): 28-30
(16)楊春光,肖尤明,徐烈,一種可用於材料在低溫環境下放氣的測試系統,《真空》,2007, 43(3): 75-77
(17)楊春光,徐烈,環境友好型聚氨酯泡沫低溫熱物性測試裝備的開發,《低溫與超導》2009, 37(9): 41-44
(18)楊春光,高霞,真空絕熱板中的熱橋效應及其最佳化措施,《真空》2010, 47(3): 78-82
(19)張寧,楊春光,高霞,邵雪,真空絕熱板內部真空度的影響因素分析及改善措施,《真空》, 2010, 47(1) : 19-22
(20)楊春光,都萍,張麗,高紅岩,鍛鍊,真空絕熱板用於北方建築外牆的部件最佳化及節能分析,新型建築材料, 2012,8:11-14
(21)李亞娟,楊春光,顧小克,真空絕熱板中表面隔膜的影響因素及最佳化措施,節能, 2012,31(2):16-19
(22)邵雪,楊春光,製冷系統水平管降膜蒸發器換熱性能的影響因素分析,節能, 2010,29(1):4-7
(23)楊春光,李亞娟,徐烈,真空絕熱板部件真空出氣性能及機理分析,《真空》, 2012, 49(6):74-78
(24)楊春光,杜長明,徐鶴,基於環境友好型發泡劑的硬質聚氨酯泡沫塑膠的性能研究,中國塑膠, 2014, 28(2): 45-49
(25)齊嬌,楊春光,徐鶴,杜長明,真空絕熱板對我國不同氣候區建築能耗的影響模擬分析,節能, 2014, 2
(26)楊春光,徐鶴,徐烈,都萍,硬質聚氨酯泡沫低溫比熱的試驗,江蘇大學學報, 2014, ,35(2): 229-232
授權專利
載入狀態下泡沫類絕熱材料低溫熱導率的測試裝置(發明)(楊春光,高興,張殿光,鍛鍊) 授權號:ZL201010223675.3
著書
建築設備施工組織與管理一點通,中國建築工業出版社, 2011.1,參編.
製冷及低溫工藝,機械工業出版社, 2012.8,參編.