楊夏煒，男，西北工業大學，材料學院，材料成型及控制系，副教授/博士生導師。主要從事：（1）摩擦焊接及接頭完整性研究；（2）複雜構件熱處理過程多場耦合模擬研究。近5年共發表第一作者SCI論文17篇，第一作者EI論文3篇，授權發明專利2項。獲2016年度陝西高等學校科學技術獎一等獎（排名第3）。獲2017年度陝西省科學技術獎二等獎（排名第3）。先後兩次獲得西北工業大學本科優秀畢業論文指導教師。
基本介紹
- 中文名：楊夏煒
- 國籍：中國
- 職業：高校教師
- 畢業院校：哈爾濱工業大學
- 學位/學歷：博士
- 專業方向：摩擦焊接
- 職務：副教授/博士生導師
- 主要成就：陝西省科學技術獎二等獎
教育經歷,工作經歷,學術成果,
教育經歷
2001.9-2005.7 哈爾濱工業大學 材料科學與工程學院 材料成型及控制工程 學士
2005.9-2007.7 哈爾濱工業大學 材料科學與工程學院 材料學 工學碩士
2008.9-2013.6 哈爾濱工業大學 材料科學與工程學院 材料科學與工程 工學博士
工作經歷
2007.7-2008.8 德昌電機 零件部 模具設計工程師
2013.7-2016.4 西北工業大學 材料學院 材料成型及控制系 講師
2016.3-今 西北工業大學 材料學院 焊接黨支部書記
2016.5-今 西北工業大學 材料學院 材料成型及控制系 副教授（破格）
2018.6-今 西北工業大學 材料學院 材料成型及控制系 副教授/碩士生導師
2019.6-今 西北工業大學 材料學院 材料成型及控制系 副教授/博士生導師
學術成果
SCI 列表：
2011年
1.楊夏煒*,朱景川,來忠紅,劉勇,王洋. TA15鈦合金熱擠壓過程中金屬變形行為及組織分析.稀有金屬材料與工程. 2011, 40(5): 797-801(SCI, IF=0.164)
2012年
2.X.W. Yang*, Z.H. Lai, J.C. Zhu, Y. Liu, D. He. Hot Compressive Deformation Behavior of the As-Quenched A357 Aluminum Alloy.Materials Science and Engineering B, 2012, 177(19):1721-1725 (SCI, IF=1.846)
3.X.W. Yang*, J.C. Zhu, Z.H. Lai, Y. R. Kong, R. D Zhao, D. He. Application of Artificial Neural Network to Predict the Flow Stress of the As-Quenched A357 Alloy.Materials Science and Technology, 2012, 28(2): 151-155 (SCI,IF=0.751)
2013年
4.Xiawei Yang,Jingchuan Zhu*,Zhisheng Nong, Zhonghong lai, Dong He. FEM Simulation of Quenching Process in Aluminum Alloy Cylindrical Bars and Reduction of Quench Residual Stress Through Cold Stretching Process.Computational Materials Science,2013, 69: 396-413(SCI, IF=1.879)
5.Xiawei Yang,Jingchuan Zhu*,ZhishengNong, Dong He, Zhonghong Lai, Ying Liu, Fawei Liu. Prediction of Mechanical Properties of A357 Alloy Using Artificial Neural Network.Transactions of Nonferrous Metals Society ofChina.2013, 23(3): 788-795 (SCI, IF=1.001)
6.Xiawei Yang, Jingchuan Zhu*, Dong He, Zhonghong Lai,ZhishengNong, Yong Liu. Optimum Design of Flow Distribution in Quench Tank for Heat Treatment of A357 Aluminum Alloy Large Complicated Thin-Wall Workpieces by Using CFD Simulation and ANN Approach.Transactions of Nonferrous Metals Society ofChina.2013, 23(5): 1442-1451 (SCI, IF=1.001)
7.Xiawei Yang, Jingchuan Zhu*, Zhonghong Lai, Yong Liu, Dong He,ZhishengNong. Finite Element Analysis of Quench Temperature Field, Residual Stress and Distortion in A357 Aluminum Alloy Large Complicated Thin-Wall Workpieces.Transactions of Nonferrous Metals Society ofChina. 2013, 23(6): 1751-1760 (SCI, IF=1.001)
8.Xiawei Yang, Jingchuan Zhu*, Zhisheng Nong, Mao Ye, Zhonghong Lai, Yong Liu. Constitutive Behavior of As-Quenched Al-Cu-Mn Aluminum Alloy.Modern physics letters B. 2013, 27(19):1341036(8pages) (SCI, IF=0.687)
2014年
9.X. W. Yang, T. Fu, and W. Y. Li*. Friction Stir Spot Welding: A Review on Joint Macro- and Microstructure, Property, and Process Modelling. Advances in Materials Science and Engineering. Volume 2014, Article ID 697170, 11 pages(SCI, IF=0.744)
2015年
10.X.W. Yang*, J.C. Zhu, W.Y. Li. Constitutive behaviour in as quenched Al-5Cu-0.4Mn alloy during hot deformation.Materials Science and Technology, 2015, 31(11):1320-1328(SCI, IF=1.008)
11.Yang Xiawei*,Li Wenya, Ma Tiejun.Computational analysis of the linear friction welding process and micromechanical modeling of the deformation behavior for medium carbon steel.Journal of Central South University, 2015, 22, 3275-3281(SCI, IF=0.562)
12. Yang Xiawei*, Zhu Jingchuan, Li Wenya. CFD supported the optimization of the flow distribution in quench tank for heat treatment of A357 alloy large complicated components.Transactions of Nonferrous Metals Society of China,2015,25: 3399-3409(SCI, IF=1.340)
13. Xiawei Yang,Wenya Li, Jiang Li, Tiejun Ma, Jia Guo. FEM analysis of temperature distribution and experimental study of microstructure evolution in friction interface of GH4169 superalloy.Materials and Design. 2015, 84:133-143 (SCI, IF=3.997)
14. Xiawei Yang,Wenya Li*, Jinglong Li, Bo Xiao, Tiejun Ma, Zhe Huang, Jia Guo. Finite element modeling of the linear friction welding of GH4169 superalloy.Materials and Design. 2015, 87: 215-230 (SCI, IF=3.997)
15. Xiawei Yang, Wenya Li*. Flow behavior and processing maps of a low-carbon steel during hot deformation.Metallurgical and Materials Transactions A. 2015, 46(12): 6052-6064(SCI, IF=1.749)
2016年
16. Xiawei Yang, Wenya Li*, Juan Ma, Shitian Hu, Yong He, Long Li, Bo Xiao. Thermo-physical simulation of the compression testing for constitutive modeling of GH4169 superalloy during linear friction welding.Journal of Alloys and Compounds. 2016, 656: 395-407(SCI, IF=3.014)
17. Xiawei Yang*, Wenya Li*,Yan Feng,Siqi Yu,Bo Xiao.Physical simulation of interfacial microstructure evolution for hot compression bonding behavior in linear friction welded joints of GH4169 superalloy.Materials and Design. 2016,104: 436-452(SCI, IF=3.997)
EI列表：
18.Xiawei Yang, Jingchuan Zhu, Zhonghong Lai, Yong Liu,JiajunZhan. Fractal Studies on Primary Phase Morphology of the TA15 Titanium Alloy after Hot Compressive Deformation.Journal of Shanghai Jiaotong University (Science). 2011, 16(3): 343-346 (EI)
19.Yang Xiawei,Li Wenya, Ma Tiejun.Finite element analysis of the effect of micro-pore defect on linear friction welding of medium carbon steel. China welding. 2014, 23(1):1-5(EI)
20.Yang Xiawei, Li Wenya, Zhu Jingchuan, Lai Zhonghong, Nong. Zhisheng.Numerical study of residual stresses and distortion in quenched large complicated thin-wall A357 aluminum alloy workpieces.Thermal Process Modeling-Proceedings from the 5th International Conference on Thermal Process Modeling and Computer Simulation, ICTPMCS 2014, p156-162, 2014(EI)
專利列表：
21. 朱景川,楊夏煒,來忠紅,劉勇,何東.結合有限元法和反傳熱法計算淬火介質換熱係數的方法.發明專利.申請日: 2011.12.2.專利號: ZL 2011 1 0395888.X.授權公告日: 2014.2.12
22.楊夏煒,張志函,李文亞,李錦鋒,王衛兵.一種可消除攪拌摩擦點焊Hook缺陷的方法.發明專利.申請日: 2014.5.5.專利號:ZL201410186178.X. 授權公告日: 2016.2.3
