梁越昇

梁越昇，美國柏克萊加州大學機械工程博士，東華大學機械工程學院講座教授及博導。

基本介紹

• 中文名：梁越昇
• 職業：教授

簡介

梁越昇現為美國喬治亞理工學院機械工程學院永久講座及終身教授，經遴選為上海市“千人計畫”專家及國家“千人計畫”專家，於2012年起在東華大學機械工程學院兼任講座教授及博士生導師。他在聯合國、美國防部門、國家實驗室及許多大型汽車、航太、關鍵零組件、生產設備等相關機構與產業的委託支持下，致力於製造系統的研發，主導推動大型製造企業進行全方位的創新力，生產力，及競爭力的策略變革與提升。

研究方向

精密化、智慧型化、自動化、微型化、永續化，及遠距化之高效能機械製造工藝、設備、系統、科學與技術。

學術兼職

1、總裁,北美洲製造研究學術院 (President, North American Manufacturing Research Institution (NAMRI))

2、理事長, 美國機械工程師學會製造門會 (Chair, Manufacturing Engineering Division, American Society of Mechanical Engineers (MED/ASME))

3、先進制造講座冠名教授、美國喬治亞理工學院機械系 (Morris M. Bryan, Jr. Professor for Advanced Manufacturing Systems, Georgia Institute of Technology, USA.)

4、總經理,華新麗華股份有限公司(總管理部)

5、總工程師,上海工具機公司

科研成果

科研項目

（共主持55科研項目, 含以下在研）：

1、Single-Grit Magnetobrasion for Free Form Micro-Machining, GT Fund for Innovation in Research and Education, GT-FIRE, 3/12-6/14.

2、Predictive Modeling for First-Part-Right Grind Shaping of Honeycomb Substrates, Corning Corp., 9/2012-8/2014.

3、Manufacturing-Influenced Computational Materials Design, Boeing Strategic University Program (SUP), 12/2012-12/2014.

4、Intelligent Learning Engines for Manufacturing, SEC Academic Sinica (SEAS), 7/2013-12/2013.

5、Intelligent Manufacturing Systems, SEC Academic Sinica (SEAS), 1/2014-6/2016.

6、Making Ultra-Fine Grained Pure Titanium-Based Medical Implant by Seamless Integrating Severe Plastic Deformation and Machining, US National Science Foundation, 4/2014 – 3/2017.

7、Investigation of Alternative Manufacturing Processes for the Production of Slot-Type Features in Difficult-to-Machine Materials, ALCOA, 3/2014 – 3/2016.

學術論文（共300餘篇論文及20餘場國際會議主題講演、含近一年發表）：

1、Su, J.-C., Young, K. A., Ma, K., Srivasta, S., Morehouse, J. B., and Liang, S. Y., “Modeling of Residual Stresses in Milling,” International Journal of Advanced Manufacturing Technology, Vol. 65, Issue 5, 2013, pp. 717-733.

2、Su, J.-C., Young, K. A., Ma, K., Srivatsa, S., Morehouse, J. B., and Liang, S. Y., “Predictive Modeling of Machining Residual Stresses Considering Tool Edge Effects,” Production Engineering Research and Development, : Volume 7, Issue 4, 2013, pp. 391-400.

3、Venkatachalam, S., Li, X., Fergani, O., Yang, J. G., and Liang, S. Y., “Crystallographic Effects on Micro-scale Machining of Polycrystalline Brittle Materials,” ASME Trans. Journal of Micro and Nano-Manufacturing, Vol. 1, No. 4, 2013, pp. 041001-1~04100-9.

4、Hwang, J., Jeong, E.-H., Chung, E.-S., and Liang, S. Y., “Assessment of the Cutting Tooling Effect on Turning Chatter,” Proceedings of International Conference on Mechatronics and Control Engineering (ICMCE), Dalian, China, 2013.

5、Ji, X., Zhang, X. P., Li, B. Z., and Liang, S. Y., “Predictive Modeling of Cutting Force, Temperature, and Residual Stress in Minimum Quantity Lubrication,” Proceedings of 2nd International Conference on Machine Design and Manufacturing Engineering（ICMDME), Jeju Island, S. Korea, May 1~2, 2013.

6、Pucha, R., Utschig T., and Liang, S. Y., “Use of Process-oriented Approaches in Content-Intensive Courses: Some Insight in Teaching / Learning of Machine Design” Proceedings of 120th ASEE Annual Conference & Exposition, Atlanta, Paper ID # 6259, June 23-26, 2013.

7、Hwang, J., Jeong, E.-H., Chung, E.-S., and Liang, S. Y., “Assessment of the Cutting Tooling Effect on Turning Chatter,” Applied Mechanics and Materials, Vol. 433-435, 2013, pp. 2101-2106.

8、Ji, X., Zhang, X. P., and Liang, S. Y., “Effects of Cutting Fluid on Force, Temperature and Residual Stress,” Proceedings of International Forum on System and Mechatronics, Gui-lin, China, July 22~25, 2013.

9、Ji, X., Zhang, X. P., Li, B. Z., and Liang, S. Y., “Predictive Modeling of Minimum Quantity Lubrication: Cutting Force, Temperature and Residual Stress,” Applied Mechanics and Materials, Vol. 365-366, 2013, pp 1181-1184.

10、Li, B., Ni, J., Yang, J., and Liang, S. Y., “Study on High-speed Grinding Mechanisms for Quality and Process Efficiency,” International Journal of Advanced Manufacturing Technology, 2013, DOI 10.1007/s00170-013-5297-y.

11、Fergani, O., Mamedov, A., Lazoglu, I., Yang, J., and Liang, S. Y., “Prediction of Residual Stress Induced Distortions in Micro-milling of Al7050 Thin Plate”, Proceedings of International Conference on Management, Manufacturing and Materials Engineering (ICMMM), Xi’an, China, October 25-27, 2013.

12、Omar Fergani and Steven Y. Liang, “Materials–Affected Manufacturing, Manufacturing Letters, Vol. 1, 2–4, 2013, pp. 74–77.

13、Shih, A. H., and Liang, S. Y., “Magnetic Levitation and Rotation for Feasibility of Free-form Machining,” Proceedings of 2013 The 4th International Conference on Frontiers of Manufacturing and Design Science (ICFMD), Hong Kong, Dec 11-13, 2013.

14、Shao, Y., Fergani, O., Venkatachalam, S., and Liang, S. Y., “Predictive Materials-Influenced Force Model in the Ductile-Regime Machining of Polycrystalline Brittle Materials,“ International Journal of Recent Advances in Mechanical Engineering (IJMECH), Vol. 2, No. 4, November 2013, pp. 1-7.

15、Ji, X., Zhang, X., and Liang, S. Y., “Predictive Modeling of Residual Stress in Minimum Quantity Lubrication Machining, International Journal of Advanced Manufacturing Technology, 2013, DOI 10.1007/s00170-013-5439-2.

16、Shih, A. H., and Liang, S. Y., “Magnetic Levitation and Rotation for Feasibility of Free-form Machining,” Applied Mechanics and Materials, Vols. 496-500, pp 1048-1051, Trans Tech Publications, Switzerland, 2014.

17、Liang, S. Y., Li, Y., Billington, S. A., Zhang, C., Shiroishi, J., Kurfess, T. R., and Danyluk, S., “Adaptive Prognostics for Rotary Machineries,” Proceedings of International Conference on Structural Integrity, Kalpakkam, India, February 4-7, 2014.

18、Fergani, O., Mamedov, A., Lazoglu, I., Yang, J., and Liang, S. Y., “Prediction of Residual Stress Induced Distortions in Micro-milling of Al7050 Thin Plate”, Applied Mechanics and Materials, Vol. 472, 2014, pp 677-681.

19、Fergani O., Shao Y., Lazoglu I., Tabei, A., Liang S. Y., “Temperature Effect on Grinding Residual Stresses,” 6th CIRP Conference on High Performance Cutting, Berkeley, June 23-25, 2014 (accepted)

20、Fergani, O, Shao Y, Liang S Y, Effect of Temperature on the Subsurface Microstructure and Mechanical Properties of AA 7075-T6 during Orthogonal Cutting, 2nd CIRP Conference on Surface Integrity (CSI), Notthingham, UK, 28-30 May 2014 (accepted)

21、Wu, Zhouping, Li, Beizhi, Yang, Jianguo, and Liang, S. Y., “Effect of Grinding Wheel on the Dynamic Performance of High-Speed Spindle System with an Improved FE Model,” Journal of Vibroengineering, 2014 (accepted).

獲獎情況

1、美國道格拉斯工程獎章 (Douglas Outstanding Young Manufacturing Engineer Award, SME);

2、國際迪德工程獎章 (Ralph R. Teetor Educational Award, SAE International);

3、伍卓夫學術專家獎 (Woodruff Faculty Fellow, Georgia Institute of Technology, USA)

4、美國機械工程師學會院士 (Fellow, American Society of Mechanical Engineers);

5、美國布列爾量測技術獎章 (ASME Blackall Machine Tool and Gage Award);

6、國際製造工程師學會院士 (Fellow, American Society of Manufacturing Engineers);

7、上海千人計畫專家;

8、最佳論文發表獎,國際機電系統會議 (Best Paper Award, International Forum on System and Mechatronics);

9、國家千人計畫專家.

主講課程

1、工具機設計與控制(Machine Tool Design and Control), (研)

2、設計,材料,與製造(Design, Materials, and Manufacture), (本)

3、製造工程與技術(Manufacturing Engineering), (本)