林明錦

林明錦

Lim Ming Kim / 林明錦 博士，教授，博士生導師。“巴渝學者”計畫特聘教授，SSCI期刊International Journal of Logistics Research and Applications聯合主編，International Journal of Supply Chain and Operations Resilience主編，無線射頻識別優越研究聯盟創建者。主要研究方向為綠色物流，智慧型製造，技術創新，物聯網，大數據分析，綠色/可持續發展，系統/流程最佳化。

現任重慶大學機械工程學院院長。

基本介紹

  • 中文名：林明錦（Ming Kim Lim）
  • 國籍：馬來西亞
  • 出生地：吉隆坡
  • 職業：教師
  • 畢業院校：英國埃克塞特大學
  • 學位/學歷：博士/博士後
  • 專業方向：智慧型製造,技術創新,物聯網,大數據分析，綠色製造
  • 職務：院長／教師
  • 主要成就：教授/博士研究生導師
  • 學術代表作：2部專著，9個章節，140餘篇論文
個人簡介,人物履歷,研究領域,學術成就,主要代表性著作,科研項目,近5年發表的論文,Journal Articles,Book Chapters/Series,Conference Papers,

個人簡介

2004年12月獲英國埃克塞特大學(University Of Exeter)製造工程與管理博士學位，1998年7月獲英國利物浦大學(University of Liverpool)製造工程學士學位。近五年，主持英國“國家工程與物理科學基金”、“國家創新基金”、“歐盟基金”等項目，科研經費總額折合人民幣 2400 多萬元。在智慧型製造、綠色/可持續供應鏈管理、物流信息化及仿真、最佳化數學算法等領域，都有深入的研究和突出的學術成果。其研究成果發表在Journal of Cleaner Production, International Journal of Production Economics, International Journal of Production Research, Production Planning and Control, European Journal of Operational Research, Journal of the Operational Research Society, Expert Systems with Applications, Industrial Management & Data System, International Journal of Logistics: Research and Applications等多份國際期刊上。
現擔任重慶大學機械工程學院院長，SSCI期刊International Journal of Logistics Research and Applications聯合主編，International Journal of Supply Chain and Operations Resilience主編。“巴渝學者”計畫特聘教授。

人物履歷

2017-12~ 中國重慶大學機械工程學院院長，製造與物流工程教授，博士生導師。
2016-06~2017-09 英國考文垂大學(Coventry University)供應鏈與運營管理教授。
2012-09~2016-05 英國 德比大學(University of Derby)供應鏈與物流管理教授(2013年6月晉升教授)。
2001-09~2004-12 英國埃克塞特大學(University of Exeter)博士後。
1998-09~2004-12 英國埃克塞特大學(University of Exeter)製造工程與管理博士生，獲博士學位。

研究領域

· 射頻識別技術（RFID）
· 雲計算、物聯網、工業4.0與大數據分析
· 人工智慧（多主體系統）
· 綠色/低碳物流和可持續供應鏈管理
· 回響和可重構的工業系統和供應鏈
· 精益和敏捷製造
· 元啟發式最佳化方法（遺傳算法，模擬退火）
· 系統建模和仿真以及成本和系統最佳化

學術成就

提出了基於 Multi-Agent 的智慧型製造系統建模與仿真研究，為智慧型製造系統最佳化奠定理論基礎。提出在不確定環境下運用工業大數據對製造系統供應鏈的最佳化方法，為製造系統供應鏈綠色與可持續性發展奠定理論基礎。提出基於元啟發式算法的製造資源分配理論，建立製造過程非線性複雜模型，獲得了國際同行的套用。在 J CLEAN PROD (SCI/EI, IF=5.715), INT J PROD ECON (SCI/EI, IF=3.494), EURJ OPER RES (SCI/EI, IF=3.297), ENG APPL ARTIF INTEL (SCI/EI, IF=2.894), INT J PRODRES (SCI/EI, IF=2.325), PROD PLAN CONTROL (SCI/EI, IF=2.369), EXPERT SYST APPL(SCI/EI, IF=3.928)等相關領域重要期刊已發表了超過140篇論文和著作。其中，近五年發表SCI/SSCI/EI論文80篇，在世界著名學術出版社出版了2部專著和9個章節。論文和專著近五年被引用將近1100次（Google Scholar），180 次（SCI）和250次（EI）。其中，2013年在J CLEAN PROD 發表的“Green as the new lean: How to use lean practices as a catalyst to greening your supply chain”，單篇被引最高達282次。

主要代表性著作

(1) Ming-LangTseng; MingLim; Kuo-JuiWu; LiZhou; David Tat DatBui, A novelapproach for enhancing green supply chain management using convergedinterval-valued triangular fuzzy numbers-grey relation analysis, RESOURCESCONSERVATION AND RECYCLING. (期刊論文)
(2) Lim, Ming K.; Tan, Kim; Leung, Stephen C. H., Using a multi-agentsystem to optimise resource utilisation in multi-site manufacturing facilities, INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, 2012.11.27, 51(9): 2620~2638. (期刊論文)
(3) Lim, Ming K. ; Bahr, Witold; Leung, Stephen C. H., RFID in thewarehouse: A literature analysis (1995-2010) of its applications, benefits,challenges and future trends , INTERNATIONAL JOURNAL OF PRODUCTION ECONOMICS,2013.5.12, 145(1): 409~430. (期刊論文)
(4) Tseng, Ming-Lang; Tan, Kim-Hua; Lim, Ming; Lin, Ru-Jen; Geng, Yong, Benchmarking eco-efficiency in green supply chain practices in uncertainty , PRODUCTION PLANNING & CONTROL, 2014.10.26, 25(13-14): 1079~1090. (期刊論文)
(5) Ming-Lang Tseng; Ming K. Lim; Wai-Peng Wong; Yi-Chun Chen; Yuanzhu Zhan, A framework for evaluating the performance of sustainable service supplychain management under uncertainty, INTERNATIONAL JOURNAL OF PRODUCTIONECONOMICS. (期刊論文)
(6) Dues, Christina Maria; Tan, Kim Hua; Lim, Ming, Green as the new Lean:how to use Lean practices as a catalyst to greening your supply chain , JOURNAL OF CLEANER PRODUCTION, 2013.2, 40: 93~100. (期刊論文)
(7) Lim, Ming K. ; Tseng, Ming-Lang; Tan, Kim Hua; Bui, Tat Dat, Knowledge management in sustainable supply chain management: Improving performancethrough an interpretive structural modelling approach , JOURNAL OF CLEANERPRODUCTION, 2017.9.20, 162: 806~816. (期刊論文)
(8) Tseng, MingLang; Lim, Ming; Wong, Wai Peng, Sustainable supply chainmanagement A closed-loop network hierarchical approach , INDUSTRIAL MANAGEMENT& DATA SYSTEMS, 2015.1.16, 115(3): 436~461 . (期刊論文)
(9) Mengru Tu; Ming Lim; Ming-Fang Yang, IoT-based production logistics andsupply chain system-Part 2: IoT-based cyber-physical system: A framework &evaluation, INDUSTRIAL MANAGEMENT & DATA SYSTEMS . (期刊論文)
(10) Mengru Tu; Ming K. Lim; Ming-Fang Yang, Internet of Things-basedproduction logistics and supply chain system-Part 1: Modeling IoT-basedmanufacturing supply chain, Industrial Management and Data System, 2017.06.24,118(1): 65~95 . (期刊論文)
(11) 2017 Jose Arturo Garza-Reyes, Vikas Kumar, Juan Luis Martinez-Covarrubias, and Ming K. Lim, “Managing Innovation and Operations in the 21st Century”, CRC Press. (專著)
(12) 2013, Ming K Lim (Ed) “Bidding: Types, Strategies & the Impact of Irrationality”, Nova Science Publishers, ISBN-13: 9781628080506. (專著)

科研項目

近五年，主持英國“國家工程與物理科學基金”、“國家創新基金”、“歐盟基金”等24個項目，科研經費總額折合人民幣 2400 多萬元。在RFID、智慧型製造、綠色/可持續供應鏈管理、物流信息化及仿真、最佳化數學算法等領域，都有深入的研究。

近5年發表的論文

Journal Articles

  1. 2018, Fuli Zhou, Xu Wang, Ming K. Lim, Yandong He, Longxiao Li, “Sustainable recycling partner selection using fuzzy DEMATEL-AEW-FVIKOR: a case study in small-and-medium enterprises (SMEs)”, Journal of Cleaner Production, in Print.
  2. 2018, Jackie, Corporate sustainability performance improvement: an interrelationship hierarchical model approach, Business Strategy and the Environment, In print.
  3. 2018, Ming-Lang Tseng, Kuo-Jui Wu, Chia-Hao Lee, Ming Lim, Tat-Dat Bui, Chih-Cheng Chen, “Assessing sustainable tourism in Vietnam: a hierarchical structure approach”, Journal of Cleaner Production, in Print.
  4. 2018, Kuo-Jui Wu, Yafang Zhu, Chia-Hao Lee, Ming-Lang Tseng, Ming Lim, Bing Xue, “Developing a hierarchical structure of the co-benefits of the triple bottom line under uncertainty”, Journal of Cleaner Production, in Print.
  5. 2018, Ling-Ling Li; Xin-Bao Zhang; Ming-Lang Tseng, Ming K. Lim; Han Ye, “Sustainable energy saving: a junction temperature numerical calculation method for power Insulated gate bipolar transistor module”, Journal of Cleaner Production, in Print.
  6. 2018, Hou J, Teo TSH, Zhou F, Lim MK, Chen H, “Does industrial green transformation successfully facilitate a decrease in carbon intensity in China? An environmental regulation perspective”, Journal of Cleaner Production, In Print, doi: 10.1016/j.jclepro.2018.02.311
  7. 2018, Ling-Ling Li, Xin-Bao Zhang, Ming-Lang Tseng, Ming Lim, Ye Han, “Sustainable energy saving: a junction temperature numerical calculation method for power Insulated gate bipolar transistor module”, Journal of Cleaner Production, In Print.
  8. 2018, Zhimei Lei, Kuo-Jui Wu, Li Cui, Ming K Lim, “A Hybrid Method of Exploring the Risk Dependency Structure Among Agribusiness Firms”, Sustainability, 10, 533; doi:10.3390/su
  9. 2018, Ming-Lang Tseng, Ling-Ling Li; Guo-Qian Lin; kimhua Tan; Ming Lim, “A Maximum Power Point Tracking Method for PV System with Improved Gravitational Search Algorithm”, Applied Soft Computing, In print.
  10. 2018, Marlon Meier, Kim Hua Tan, Ming K Lim, Leane Chung, "Unlocking Innovation in the Sport Industry through Additive Manufacturing", Business Process Management Journal, In print.
  11. 2018, Bek, David & Lim, Ming K, “The Circular Economy: A Key Approach for Addressing Strategic Business Challenges in Supply Chains”, Social Business, 8(1), 95-102.
  12. 2018, Ke Ronga, Jialun Hu, Yuge Ma, Ming K Lim, Yang Liu, Chao Lu, “The sharing economy and its implications for sustainable value chains”, Resources, Conservation & Recycling, 130, 188-189.
  13. 2018, Tu, Mengru; Lim, Ming; Yang, Ming-Fang, “Internet of Things-based production logistics and supply chain system-Part 1: Modeling IoT-based manufacturing supply chain”, Industrial Management and Data System, 118, 1, 65-95.
  14. 2018, Tu, Mengru; Lim, Ming; Yang, Ming-Fang, “IoT-based production logistics and supply chain system-Part 2: IoT-based cyber-physical system: A framework & evaluation”, Industrial Management and Data System, 118,1, 96-125.
  15. 2017, Chen, Liquan; Lim, Ming; Fan, Zijuan, “A Public Key Compression Scheme for Fully Homomorphic Encryption Based on Quadratic Parameters with Correction” IEEE Access, 5,17692-17700.
  16. 2017, Tu, Mengru; Lim, Ming; Yang, Ming-Fang, “Internet of Things-based production logistics and supply chain system-Part 1: Modeling IoT-based manufacturing supply chain”, Industrial Management and Data System, Accepted.
  17. 2017, Tu, Mengru; Lim, Ming; Yang, Ming-Fang, “IoT-based production logistics and supply chain system-Part 2: IoT-based cyber-physical system: A framework & evaluation”, Industrial Management and Data System, Accepted.
  18. 2017, Ming K. Lim, Ming-Lang Tseng, Kim Hua Tan and Tat Dat Bui, “Knowledge management in sustainable supply chain management: improving performance through an interpretive structural modelling approach”, Journal of Cleaner Production, 162, 806-816.
  19. 2017, Eleni Iacovidou, Philip Purnell and Ming K. Lim, “The use of smart technologies in enabling construction components reuse: A viable method or a problem creating solution?”, Journal of Environmental Management.
  20. 2017, Krista Yu, Kathleen Aviso, Michael Angelo B. Promentilla, Farhan Khan, Ming Lim, Anthony Chiu, Raymond R. Tan, “Hybrid input-output model for minimizing carbon emissions in waste valorization supply chains”, Chemical Engineering Transactions, In print.
  21. 2017, Ming K. Lim and Christine Jones, “Resource efficiency and sustainability in logistics and supply chain management”, 20(1), 20–21.
  22. 2017, Ming-Lang Tseng, Ming Lim, Kuo-Jui Wu, Li Zhou and David Tat Dat Bui, “A novel approach for enhancing green supply chain management using converged interval-valued triangular fuzzy numbers-grey relation analysis”, Resources, Conservation and Recycling, 2017 http://dx.doi.org/10.1016/j.resconrec.2017.01.007
  23. 2017, Kuo-Jui Wu, Ming-Lang Tseng, Anthony S.F. Chiu and Ming K. Lim, “Achieving competitive advantage through supply chain agility under uncertainty: A novel multi- criteria decision-making structure”, International Journal of Production Economics, 180, 96-107.
  24. 2017, Kuo-Jui Wu, Ching-Jong Liao, Ming-Lang Tseng, Ming K. Lim, Jiayao Hu and Kimhua Tan, “Toward sustainability: Using big data to explore decisive supply chain risk factors under uncertainty”, Journal of Cleaner Production, 142(2), 663–676, 142(2), 663-676.
  25. 2017, Bernardo Villarreal, Jose Arturo Garza-Reyes, Vikas Kumar and Ming K. Lim, “Improving road transport operations through lean thinking: A case study”, International Journal of Logistics: Research and Applications, 20(2), 163-180.
  26. 2017, Ha Minh Vu, Hing Kai Chan, Ming K. Lim, Anthony S.F. Chiu, “Measuring business sustainability in food service operation: A case study in the fast food industry”, Benchmarking: An International Journal, 24(4), 1037-1051.
  27. 2017, Hing Kai Chan, Ewelina Lacka, Rachel W.Y. Yee and Ming K. Lim, “The role of social media data in operations and production management”, International Journal of Production Research, 55(17).
  28. 2016, Ming-Lang Tseng, Ming K. Lim, Wai-Peng Wong, Yi-Chun Chen and Yuanzhu Zhan, “A framework for evaluating the performance of sustainable service supply chain management under uncertainty”, International Journal of Production Economics.
  29. 2016, Shuihua Han, Weina Ma, Ling Zhao, Xuelian Zhang, Ming K. Lim, Shuangyuan Yang and Stephen Leung, “A robust optimization model for hybrid remanufacturing and manufacturing systems under uncertain return quality and market demand”, International Journal of Production Research, 54(17).
  30. 2016, Hing Kai Chan, Rachel W.Y. Yee, Jing Dai and Ming K. Lim, “The moderating effect of environmental dynamism on green product innovation and performance”, International Journal of Production Economics, 181(B), 384-391.
  31. 2015, Ming-Lang Tseng, Ming Lim and Wai Ping Wong, “Sustainable supply chain management: a closed-loop network hierarchical approach”, Industrial Management & Data System, 115(3). Outstanding Paper in the 2016 Emerald Literati Network Awards for Excellence.
  32. 2015, Ming-Lang Tseng, Yuan Hsu Lin, Ming K. Lim and Benito L. Teehankee, “Using hybrid method to evaluate the service innovation in hotel industry”, Applied Soft Computing, 28, 411-421.
  33. 2014, Ming-Lang Tseng, Kim-Hua Tan, Ming Lim, Ru-Jen Lin and Yong Geng, “Benchmarking eco-efficiency in green supply chain practices in uncertainty”, Production Planning and Control, 25(13-14), 1079-1090.
  34. 2014, Gabriela Winck. Jacques, Jose Arturo Garza-Reyes, Ming K. Lim and Vikas Kumar “Outcomes from an exploratory study of quality improvement approaches utilization in Brazilian companies”, International Journal of Quality Engineering and Technology, 4(4), 315-333.
  35. 2014, Anthony I. Anosike and Ming K. Lim, “A synergistic approach to process innovation”, International Journal of Knowledge, Innovation & Entrepreneurship, 2(1), 33-54.
  36. 2014, Ploytip Jirasukprasert, Jose Arturo Garza-Reyes, Vikas Kumar and Ming K. Lim “A six sigma and DMAIC application for the reduction of defects in a rubber gloves manufacturing process”, International Journal of Lean Six Sigma, 5(1), 2-21.
  37. 2013, Ming K. Lim, Witold Bahr and Stephen C.H. Leung, “RFID in the warehouse: A literature analysis (1995-2010) of its applications, benefits, challenges and future trends”, International Journal of Production Economics, Vol.145, Issue 1, 409-430.
  38. 2013, Stephen C.H. Leung, Zhenzhen Zhang, Defu Zhang, Xian Hua, Ming K. Lim, “A meta-heuristic algorithm for heterogeneous fleet vehicle routing problems with two-dimensional loading constraints”, European Journal of Operational Research, 225(2), 199-210.
  39. 2013, Shuihua Han, Weina Ma, Ling Zhao, Xuelian Zhang, Ming K. Lim, Shuangyuan Yang and Stephen Leung, “Production planning for hybrid remanufacturing and manufacturing system with component recovery”, Journal of the Operational Research Society, 64, 1447-1460.
  40. 2013, Ming K. Lim, Kim Tan and Stephen C.H. Leung, “Using a multi-agent system to optimise resource utilisation in multi-site manufacturing facilities”, International Journal of Production Research, 51(9).
  41. 2013, Christina Maria Dües, Kim Hua Tan and Ming Lim, “Green as the new lean: How to use lean practices as a catalyst to greening your supply chain”, Journal of Cleaner Production, 40, 93-100.
  42. 2013, Hing Kai Chan, Sai Ho Chung and Ming K. Lim, “Recent research trend of economic-lot scheduling problems”, Journal of Manufacturing and Technology Management, 24(3), 465-482.
  43. 2013, Rebecca Aggarwal and Ming K. Lim, “Aligning physical and virtual logistical spheres with radio-frequency identification and agent-based modelling”, International Journal of Agile Systems and Management, 6(1), 66-82.
  44. 2013, Rebecca Aggarwal and Ming K. Lim, “Enhancing competitive advantage with radio-frequency identification (RFID) enabled returnable transport equipment (RTE)”, International Journal of Information Technology and Management, 12(1/2), 3-26.
  45. 2013, Johanna Virkki, Toni Björninen, Juha Virtanen, Lauri Sydänheimo, Leena Ukkonen, Ming Lim, “Embedding RFID tags into wooden doors for identification and tracking”, International Journal of Radio Frequency Identification Technology and Applications, 4(2), 181-196.
  46. 2013, M Winsper and M Lim, “Using a multi-agent system to investigate the benefits of RFID technology in the reconfiguration of disrupted supply chains”, Information Technology Journal, 12(13), 2617-2620.
  47. 2012, M.K. Lim and Z. Zhang, “A multi-agent system using iterative bidding mechanism to enhance manufacturing agility”, Expert Systems with Applications, 39(9).
  48. 2012, Senior, Carl, Howard, Christopher, Reddy, Peter, Clark, Robin and Lim, Ming, “The relationship between student Centred lectures, emotional intelligence and study teams: A social telemetry study with mobile telephony”, Studies in Higher Education, 37(8,) 957-970.
  49. 2012, Mohsan Hussain, Louise Knight and Ming Lim, “Scenario planning for healthcare management: Aligning guidance from practice to the standards of high quality research”, International Journal of Qualitative Methods, 11(5), 877-878.
  50. 2012, Chien-wen Shen, Ming K Lim and Chiao-Chun Cheng, “Technological innovation in electronics inventory solutions: An analysis of patent data”, International Journal of Digital Content Technology and its Applications, 6(13), 98-106.
  51. 2012, Peter Hosie, Ming K. Lim and Marcus Chng, “The impact of general sales agents on the air cargo industry”, International Journal of Logistics and Systems Management, 13(3), 393-416.
  52. 2012, Peter J. Hosie, Ming K. Lim, Albert Wee Kwan Tan and Yong Keong Yu, “Current and future uses of IT in Europe and Far East: Achieving competitive advantage with 3PL”, International Journal of Logistics and Systems Management, 13(1), 112 – 137.
  53. 2012, Izabela Nielsen, Ming K. Lim, Peter Nielsen and Rebecca Aggarwal, “A decision support system for waste collection management and its potential improvement with radio-frequency identification technology (RFID)”, International Journal of Environmental Technology and Management, 15(3-6), 305-324.

Book Chapters/Series

  1. 2017, Simon Peter Nadeem, Jose Arturo Garza-Reyes, Sin-Ching Leung, Anass Cherrafi, Anthony I. Anosike, Ming K. Lim, “Lean Manufacturing and Environmental Performance – Exploring the Impact and Relationship” In Hermann Lödding, Ralph Riedel, Klaus-Dieter Thoben, Gregor von Cieminski, Dimitris Kiritsis (eds)., Advances in Production Management Systems. The Path to Intelligent, Collaborative and Sustainable Manufacturing, IFIP Advances in Information and Communication Technology, Vol. 514, 331-340.
  2. 2014, Jose Arturo Garza-Reyes, Gabriela Winck Jacques, Ming K. Lim, Vikas Kumar, Luis Rocha-Lona, “Lean and Green – Synergies, Differences, Limitations, and the Need for Six Sigma”. In Bernard Grabot, Bruno Vallespir, Samuel Gomes, Abdelaziz Bouras, Dimitris Kiritsis (eds), Advances in Production Management Systems. Innovative and Knowledge-Based Production Management in a Global-Local World, IFIP Advances in Information and Communication Technology, Vol. 439, 71-81.
  3. 2013 M. K. Lim and H.K. Chan “Optimize resource utilization at multi-site facilities with agent technology”, In Christos Emmanouilidis, Marco Taisch, Dimitris Kiritsis (eds.), Advances in Production Management Systems. Competitive Manufacturing for Innovative Products and Services, IFIP Advances in Information and Communication Technology Vol. 398, 503-510.
  4. 2013, Anosike, A.I & Lim, M.K, “Integrating Lean, Theory of Constraints and TRIZ for Process Innovation”. In Ogulnlegy, J., Heger, D & Richter, U.H. (eds), Short Research Papers on Knowledge, Innovation and Enterprise, 64-75. London: KIE Conference Book Series, ISBN 978.
  5. 2013, Vikas Kumar, Archana Kumari, Jose Arturo Garza-Reyes, Ming Lim, “Dependability a Key Element for Achieving Sustainable Competitive Advantage: A Study of Information Service Firms”, In Vittal Prabhu, Marco Taisch, Dimitris Kiritsis (eds), Advances in Production Management Systems. Sustainable Production and Service Supply Chains, IFIP Advances in Information and Communication Technology, Vol. 414, 493-500.
  6. 2013, Rahul Ulhas Pai, Sujit Banerji, Jose Arturo Garza-Reyes, Ming Lim, Vikas Kumar, “Selection and Ranking of Low Cost Countries for Outsourcing and Offshoring in the Manufacturing Sector”, In Vittal Prabhu, Marco Taisch, Dimitris Kiritsis (eds), Advances in Production Management Systems. Sustainable Production and Service Supply Chains, IFIP Advances in Information and Communication Technology, Vol. 414, 501-512.
  7. 2013, Aggarwal, R and Lim, MK, "Improving Returnable Transport Equipment Management with an Autonomous Approach", Hans-Jörg Kreowski, Bernd Scholz-Reiter, Klaus-Dieter Thoben (eds), Dynamics in Logistics, 441-452.
  8. 2012 Lim, M.K. and Zhang, Z., “Achieving cost competitiveness with an agent based integrated process planning and production scheduling system, Production Scheduling, 185-206, ISBN: 987-953-307-935-6, published by InTech.
  9. 2012 Lim, M.K., “Exploring value-added benefits to enhance wider adoption of chipless RFID system”. In Nemai Karmakar (Ed.), Chipless Radio Frequency Identification: Systems for Ubiquitous Tagging, IGI Global.

Conference Papers

  1. 2017, Liquan Chen, Ming Lim and Muyang Wang, “Fully Homomorphic Encryption Scheme Based on Public Key Compression and Batch Processing”, 13th International Conference on Information Security and Cryptology, November 3-5, 2017, Xi'an, China
  2. 2017, Chih-Cheng Chen, Ming-Lang Tseng, Ming Lim and David Bui, “Assessing the sustainable tourism in Vietnam: proposed a hierarchical structure approach”, 21st International conference on Business Innovation and Technology Management, Venice Italy, 3-5 May 2017.
  3. 2017, Ming-Lang Tseng and Ming Lim “Service innovation in sustainable product service system: improving performance under linguistic preferences”, 1st International Symposium on Supply Chain and Service Innovation, Guangzhou China, 6-7 April 2017.
  4. 2016, Ming-Lang Tseng, Shu Kai S. Fan, and Ming Lim, “A novelty hybrid method for integrated innovation in strategic supply chain management”, Proceedings of the 17th Asia Pacific Industrial Engineering & Management Systems Conference, Taipei Taiwan, 7-10 December 2016.
  5. 2016, Jose Arturo Garza-Reyes, Kam-Kuen Wong, Ming K. Lim, and Vikas Kumar “Measuring the Level of Lean Readiness of the Hong Kong's Manufacturing Industry” 6th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM 2016), Seoul Korea, 27-30 June 2016.
  6. 2016, Navasiri, Pabhavi; Kumar, Vikas; Garza-Reyes, Jose; Lim, Ming K; Kumari, Archana, “How supplier selection criteria affect business performance? a study of UK automotive sector”, 21st International Symposium on Logistics, Kaohsiung, Taiwan, 3-6 July 2016.
  7. 2016, Chan, H. K., Yee, R. W. Y., Dai, J., and Lim, M. K., “The Effect of Regulatory Pressures and Environmental Dynamism on Green Product Innovation and Performance” In 19th International Working Seminar on Production Economics, Innsbruck, Austria, 22-26 February 2016, Vol. 4, pp. 51-61.
  8. 2016, Bruno Gallotta, Jose Arturo Garza-Reyes, Anthony Anosike, Ming K Lim, Ian Roberts, “A conceptual framework for the implementation of sustainability business processes” 27th Annual Conference Production and Operations Management Society, Orlando USA, 6-9 May 2016.
  9. 2015, M.L. Tseng, M. Lim, A. Chiu, “Improving the corporate sustainable development in hotels: using an interdependence hierarchical framework” Global Cleaner Production and Sustainable Consumption Conference 2015, 1-4 November 2015, Sitges, Spain.
  10. 2015, K. Hader, J.A. Garza-Reyes, M.K. Lim, “Sustainability Diffusion: Maximising the Rate of Sustainability Adoption” Global Cleaner Production and Sustainable Consumption Conference 2015, 1-4 November 2015, Sitges, Spain.
  11. 2015, K. Hader, J.A. Garza-Reyes, M.K. Lim, “Sustainability Implementation - An Innovation Diffusion Perspective” Global Cleaner Production and Sustainable Consumption Conference 2015, 1-4 November 2015, Sitges, Spain.
  12. 2015 Qassim, O., Garza-Reyes, J.A., Lim, M.K., Kumar, V., “Integrating Value Stream Mapping and PDCA to improve the operations of a pharmaceutical organisation in Pakistan”, Proceedings of the 23rd International Conference for Production Research (ICPR), Manila, Philippines, 2-5 August.
  13. 2015 Li, X., Kumar, V., Kumari, A., Garza-Reyes, J.A., Rocha-Lona, L., Lim, M.K. “Empirical investigation of the linkage between Corporate Social Responsibility, Corporate Image and Customer Loyalty among Chinese dairy consumers”, Proceedings of the 23rd International Conference for Production Research (ICPR), Manila, Philippines, 2-5 August.
  14. 2015, Ilchenko, A., Garza-Reyes, J.A., Er, A., Lim, M.K., Vikas, K., “Waste reduction in the manufacture of UPVC windows in a Russian SME: a case study”, Proceedings of the 25th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM), Wolverhampton, UK, 23-26 June 2015.
  15. 2015, Ming K Lim, Gaz Raqib, “Exploring Environmental Initiatives in the UK Logistics Sector”, 9 International Conference on Operations and Supply Chain Management (ICOSCM), Ningbo China, 13-15 July 2015.
  16. 2015, Falguieres, M., Kumar, V., Garza-Reyes, J., Kumari, A., Lim, MK., Rocha-Lona, L., “Investigating the Impact of Short Food Supply Chain on Emigration: A Study of Valencia Community in Spain”, 15th Symposium on Information control problems in Manufacturing, Ottawa Canada, 11-13 May 2015, 2306-2312. IFAC-PapersOnLine, Volume 48, Issue 3, 2015, Pages 2226-2232
  17. 2015, Garza-Reyes, J., Lim, M.K., Zisis, S., Kumar, V. and Rocha-Lona, L., “Adoption of operations improvement methods in the Greek engineering sector”, Proceedings of the 5th International Conference on Industrial Engineering and Operations Management (IEOM), Dubai, UAE, 3-5 March, 2518-2525, DOI: 10.1109/IEOM.2015.
  18. 2015, Rocha-Lona, L., Garza-Reyes, J.A., Lim, M.K., Kumar, V., “Corporate sustainability and business excellence”, Proceedings of the 5th International Conference on Industrial Engineering and Operations Management (IEOM), Dubai, UAE, 3-5 March, 1489-1495, DOI: 10.1109/IEOM.2015.
  19. 2014, Ming-Lang Tseng, Anthony SF Chiu, Ming K. Lim, “Assessing the competitive priorities within sustainable supply chain management under uncertainty” 15th Asia Pacific Industrial Engineering and Management Systems Conference, 12-15 Oct 2014, Jeju Korea.
  20. 2014, Hing Kai CHAN, Ewelina LACKA, Rachel W. Y. YEE, Ming K. LIM” A Case Study on Mining Social Media Data”, IEEE International Conference on Industrial Engineering and Engineering Management, 9-12 December 2014, Selangor Malaysia.
  21. 2014, CHINONSO UDOKPORO, Anthony Anosike, Ming K Lim, “A comparative analysis of agility and sustainability”, 12th International Conference on Manufacturing Research, 9-11 Sept 2014, Southampton Solent University.
  22. 2014, Adeyemi, A.A., Garza-Reyes, J.A., Lim, M.K., Kumar, V., Rocha-Lona, “An investigation into the challenges of implementing the EFQM Excellence Model”, Proceedings of the 24th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM), 20-23 May, 2014, San Antonio, TX, US.
  23. 2014, Ming-Lang Tseng, Ru-Jen Lin, Ming K. Lim, Anthony SF Chiu, “Identifying the competitive determinants of firms’ green supply chain capabilities: a study of the electronic manufacturing industry in Taiwan” Eighteenth International Working Seminar on Production Economics, Innsbruck, Austria, February 24-28, 2014.
  24. 2014, Chih-Cheng Chen and Ming Lim, “A Measurement of Information and Communication Technology contribution on Corporate Competitiveness Management and Efficiency between Taiwan and China Finance Industry” SIBR International Conference on Interdisciplinary Business and Economics Research, 7th-8th February 2014, Kuala Lumpur.
  25. 2013, Michael Winsper, Ming K. Lim, “Comparing the Benefits of RFID and Barcode-based track and trace in the Reconfiguration of Disrupted Supply Chains: An Empirical Study”, 18th International Symposium on Logistics (ISL 2013), Vienna, Austria, 7-10 July 2013. 762-771.
  26. 2013, M Winsper and M Lim, “Using a multi-agent system to investigate the benefits of RFID Technology in the Reconfiguration of Disrupted Supply Chains”, ScienceOne International Conference on Information Technology, 6-7 Feb 2013, Dubai, UAE.
  27. 2012, M K Lim and M Winsper, “Maximising the efficiency of logistics operations with radio frequency identification technology”, IEEE RFID – TA, 5-7 Nov 2012, Nice France, 275-280.
  28. 2012, P Singh, M Lim, D Love and G Hancox, “QFD-based manufacturing strategy development in an uncertain environment”, Int. Conf. on Manufacturing Research, 11-13 Sept 12, Birmingham UK, Vol.1, 80-85.
  29. 2012 F Sai, M Lim and G Rahib, “Green strategies and initiatives in the UK transport network and logistics industry”, Int. Conf. on Manufacturing Research, 11-13 Sept 12, Birmingham UK, Vol.1, 785-792.
  30. 2012 A Munir, M Lim and L Knight, “Capabilities and competence management in small and medium enterprises”, Int. Conf. on Manufacturing Research, Sept 11-13 2012, Birmingham UK, Vol.1, 20-25.
  31. 2012 M Alnaeem and M Lim, “The obstacles of Saudi Arabian organisational culture to implement total quality management”, Int. Conf. on Manufacturing Research, Sept 11-13 2012, Birmingham, UK, Vol.1, 292-297.
  32. 2012, S.C.H. Leung, MK Lim, A. Tan, Y Yu, “Evaluating the use of IT by the third party logistics in South East Asia to achieve competitive advantage and its future trend”, 5th IEEE International Conference on Interaction Sciences: IT, Human and Digital Content, 26-28 June, Jeju Island Korea, 465-469.
  33. 2012, M Lim and M Winsper, “Exploring value-added applications of RFID systems in industry and service sectors”, 5th IEEE International Conference on Interaction Sciences: IT, Human and Digital Content, 26-28 June, Jeju Island Korea, 470-475.
  34. 2012 Ha Minh Vu, Hing Kai Chan and Ming K. Lim, “A framework for measuring business sustainability”, International Symposium on Business and Management, 30 Mar – 1 Apr, Hong Kong, 204-211.
  35. 2012, M Lim, A Metopoulos, Y Yu, “Investigating the current and future use of IT by 3PL providers in Europe and the Far East”, International Conference on Industrial Logistics, Croatia, 14-16 June 2012, 334-341.
  36. 2012, R Aggarwal and M Lim, “Advances in decision support systems on the endeavour of supply chain optimality”, International Conference on Industrial Logistics, Croatia, 14-16 June 2012, 472-477.

相關詞條

熱門詞條

聯絡我們