基本介紹
- 中文名：李淼泉
- 國籍：中國
- 出生日期：1964.03
- 職業：教師
- 畢業院校：西北工業大學
- 學位/學歷：博士、研究生
- 專業方向：精密塑性變形理論、技術，塊體金屬表面納米化與強化技術
- 職務：教授
- 主要成就：獲得國家技術發明獎貳等獎1項(《鈦合金精密鍛造成形技術》，第1完成人)
- 學術代表作：學術專著《鈦合金精密鍛造》，科學出版社，2016年；
基本情況,學習簡歷,工作經歷,教育教學,社會兼職,主要研究方向與項目,研究方向：,科研項目,主要學術成果與獲獎,學術文獻,學術成果,榮譽獲獎,
基本情況
學習簡歷
工作經歷
1987年西北工業大學任教，1997年西北工業大學教授、博士生導師，1995年兼任西北工業大學材料科學與工程系副主任，2003年兼任西北工業大學材料學院副院長，2007年兼任國防科技工業難變形材料鍛造技術創新中心主任，2002年英國伯明罕大學訪問教授，2008年香港理工大學訪問教授。
教育教學
先後為本科生、碩士研究生、博士研究生開設三個層次的課程。獲陝西省高等學校優秀教材獎壹等獎1項(《衝壓成形理論及技術》)，西北工業大學研究生教育優秀導師稱號。《模具CAD/CAM》(主編)，西北工業大學出版社，2012年；《衝壓成形理論及技術》(執行主編)，西北工業大學出版社，2012年；《材料的先進成形技術》(副主編)，高等教育出版社，2002年；《衝壓工藝及模具設計》(副主編)，西北工業大學出版社，1989年。指導的博士學位論文《半固態Al-4Cu-Mg合金的製備及微觀組織演變研究》(江海濤，2008年)、《鈦合金鍛造過程跨尺度模型及工藝參數最佳化》(羅皎，2013年)、《熱氫處理鈦合金的微觀組織演變與性能研究》(朱堂葵，2015年)分別獲得陝西省優秀博士學位論文獎3項，博士學位論文《鈦合金鍛造過程跨尺度模型及工藝參數最佳化》入選2013年度10項代表性陝西省優秀博士學位論文創新成果。
社會兼職
1.金屬材料及加工（International Conference on Metallic Materials and Processing，ICMMP）國際學術會議發起人。與澳大利亞昆士蘭大學、美國北德克薩斯大學在澳大利亞、美國共同舉辦了ICMMP2012、ICMMP2014國際學術會議系列會議。
2.輕合金加工科學與技術國防重點學科實驗室學術委員會委員
3.中國機械工程學會塑性工程分會常務理事
4.中國航空學會材料工程分會理事
5.中國機械工程學會塑性工程分會精密鍛造技術委員會委員
6.中國機械工程學會塑性工程分會微納米成形技術委員會委員
7.中國機械工程學會塑性工程分會超塑性技術委員會委員
8.中國航空學會材料工程分會熱工藝及表面工程委員會副主任
9.陝西省有色金屬學會常務理事
10.陝西省材料研究學會理事
11.陝西省金屬學會理事
12.陝西省航空學會理事
13.《金屬學報》編委
14.《材料工程》編委
15.《材料導報》編委
16.《塑性工程學報》編委
17.《鍛壓技術》編委
18.《精密成形工程》編委
19.《International Journal of Metals》編委
20.《Journal of Control Engineering and Technology》編委
21.《Journal of Minerals》編委
主要研究方向與項目
研究方向：
1. 精密塑性變形理論
2. 精密塑性變形技術
3. 塊體金屬表面納米化與強化技術
4. 塑性變形智慧型技術
科研項目
主要學術成果與獲獎
學術文獻
1.TC8鈦合金等溫壓縮變形過程中的不連續屈服特徵 , 2016,26(6),1583-1588 ,DOI:, ISSN:1003-6326
2. Stress-induced twinning of nanocrystalline hexagonal close-packed titanium in Ti-6Al-4V , Elsevier,2016,180,47-50 ,DOI:10.1016/j.matlet.2016.05.098, ISSN:0167577X
3. Deformation induced face-centered cubic titanium and its twinning behavior in Ti-6Al-4V , Elsevier Ltd,2016,119,5-8 ,DOI:10.1016/j.scriptamat.2016.03.018, ISSN:13596462
4. Effect of the alpha grain size on the deformation behavior during isothermal compression of Ti-6Al-4V alloy , ELSEVIER SCI LTD,2015,88,32-40 ,DOI:10.1016/j.matdes.2015.08.130, ISSN:0261-3069
5. Phase dependent restoration mechanisms of TC8 titanium alloy during hot compression in the two phase region , IOP PUBLISHING LTD,2015,89(1) ,DOI:10.1088/1757-899X/89/1/012047, ISSN:1757-8981
6. Quantitative analysis of microstructure and deformation mechanisms during isothermal compression of Ti-5Al-5Mo-5V-1Cr-1Fe alloy , ELSEVIER SCIENCE INC,2015,108,115-123 ,DOI:10.1016/j.matchar.2015.09.003, ISSN:1044-5803
7. Surface nanocrystallization and gradient structure developed in the bulk TC4 alloy processed by shot peening , Elsevier Ltd,2016,685,186-193 ,DOI:10.1016/j.jallcom.2016.05.295, ISSN:09258388
8. Detailed analysis of surface asperity deformation mechanism in diffusion bonding of steel hollow structural components , Elsevier,2016,371,407-414 ,DOI:10.1016/j.apsusc.2016.03.039, ISSN:01694332
9. The flow behavior and the deformation mechanisms of Ti-6Al-2Zr-2Sn-2Mo-1.5Cr-2Nb alloy during isothermal compression , Elsevier Ltd,2016,667,44-52 ,DOI:10.1016/j.jallcom.2016.01.164, ISSN:09258388
10. Void shrinking process and mechanisms of the diffusion bonded Ti-6Al-4V alloy with different surface roughness , SPRINGER,2016,122(1),1-8 ,DOI:10.1007/s00339-015-9546-9, ISSN:0947-8396
11. The correlation between the flow behavior and the microstructure evolution during hot working of TC18 alloy , ELSEVIER SCIENCE SA,2016,654,213-220 ,DOI:10.1016/j.msea.2015.12.040, ISSN:0921-5093
12. Dynamic globularization and restoration mechanism of Ti-5Al-2Sn-2Zr-4Mo-4Cr alloy during isothermal compression , ELSEVIER SCIENCE SA,2015,622,174-183 ,DOI:10.1016/j.jallcom.2014.10.043, ISSN:0925-8388
13. Effects of hydrogenation on microstructure of Ti-6Al-4V alloy , Hanrimwon Publishing Co., 206-3 Ojang-dong, Jung-gu,, Seoul, 100-310, Korea, Republic of,2008,,1490-1494 ,DOI:, ISSN:9788957081525
14. Efficiency of power dissipation and instability criterion for processing maps in hot forming , Tech Science Press, 5805 State Bridge Road,, suite G108, GA 30027, United States,2010,18(3),271-299 ,DOI:, ISSN:15462218
15. Mechanism in the beta phase evolution during hot deformation of Ti-5Al-2Sn-2Zr-4Mo-4Cr with a transformed microstructure , PERGAMON-ELSEVIER SCIENCE LTD,2015,94,36-45 ,DOI:10.1016/j.actamat.2015.04.045, ISSN:1359-6454
16. A constitutive equation coupling the grain size during the high temperature deformation of Ti-6.62Al-5.14Sn-1.82Zr alloy , TRANS TECH PUBLICATIONS LTD,2007,561-565(PART 1),155-158 ,DOI:, ISSN:0255-5476
17. Effect of deformation parameters on the precipitation mechanism of secondary alpha phase under high temperature isothermal compression of Ti-6A1-4V alloy , ELSEVIER SCIENCE SA,2010,527(16-17),4210-4217 ,DOI:10.1016/j.msea.2010.03.024, ISSN:0921-5093
18. Effect of the hydrogen content on the deformation behavior in the isothermal compression of Ti600 alloy , ELSEVIER SCIENCE SA,2010,527(24-25),6626-6632 ,DOI:10.1016/j.msea.2010.07.005, ISSN:0921-5093
19. Characterization of the forgeability of 1Cr11Ni2W2MoV steel using processing map , ELSEVIER SCIENCE SA,2010,527(24-25),6505-6510 ,DOI:10.1016/j.msea.2010.07.003, ISSN:0921-5093
20. Deformation behavior in the isothermal compression of Ti-5Al-5Mo-5V-1Cr-1Fe alloy , ELSEVIER SCIENCE SA,2014,589,15-22 ,DOI:10.1016/j.msea.2013.09.066, ISSN:0921-5093
21. Development of processing map coupling grain size for the isothermal compression of 300 M steel , ELSEVIER SCIENCE SA,2014,595,77-85 ,DOI:10.1016/j.msea.2013.11.083, ISSN:0921-5093
22. The study on kinetics of static recrystallization in the two-stage isothermal compression of 300M steel , ELSEVIER SCIENCE BV,2014,84,115-121 ,DOI:10.1016/j.commatsci.2013.11.056, ISSN:0927-0256
23. Flow behavior and deformation mechanism in the isothermal compression of the TC8 titanium alloy , ELSEVIER SCIENCE SA,2014,600,122-128 ,DOI:10.1016/j.msea.2014.02.002, ISSN:0921-5093
24. The flow behavior and processing maps during the isothermal compression of Ti17 alloy , ELSEVIER SCIENCE SA,2014,606,165-174 ,DOI:10.1016/j.msea.2014.03.103, ISSN:0921-5093
25. Effects of heat treatment and hot deformation on the secondary alpha phase evolution of TC8 titanium alloy , ELSEVIER SCIENCE SA,2014,613,209-216 ,DOI:10.1016/j.msea.2014.06.056, ISSN:0921-5093
26. Characterization of surface layer in TC17 alloy treated by air blast shot peening , ELSEVIER SCI LTD,2015,65,120-126 ,DOI:10.1016/j.matdes.2014.09.019, ISSN:0261-3069
27. Interaction mechanism between void and interface grain boundary in diffusion bonding , MANEY PUBLISHING,2015,20(2),123-129 ,DOI:10.1179/1362171814Y.0000000242, ISSN:1362-1718
28. Formation mechanisms of high quality diffusion bonded martensitic stainless steel joints , MANEY PUBLISHING,2015,20(2),115-122 ,DOI:10.1179/1362171814Y.0000000258, ISSN:1362-1718
29. Flow softening mechanism of Ti-5Al-2Sn-2Zr-4Mo-4Cr with different initial microstructures at elevated temperature deformation , ELSEVIER SCIENCE SA,2015,628,11-20 ,DOI:10.1016/j.msea.2015.01.034, ISSN:0921-5093
30. DETERMINATION OF THE DUCTILE PLASTIC DAMAGE VARIABLE FOR THE ANNEALED 30CRMNSI , KLUWER ACADEMIC PUBL,1990,46(4),R51-R54 ,DOI:, ISSN:0376-9429
共241篇，以下從略
2. Stress-induced twinning of nanocrystalline hexagonal close-packed titanium in Ti-6Al-4V , Elsevier,2016,180,47-50 ,DOI:10.1016/j.matlet.2016.05.098, ISSN:0167577X
3. Deformation induced face-centered cubic titanium and its twinning behavior in Ti-6Al-4V , Elsevier Ltd,2016,119,5-8 ,DOI:10.1016/j.scriptamat.2016.03.018, ISSN:13596462
4. Effect of the alpha grain size on the deformation behavior during isothermal compression of Ti-6Al-4V alloy , ELSEVIER SCI LTD,2015,88,32-40 ,DOI:10.1016/j.matdes.2015.08.130, ISSN:0261-3069
5. Phase dependent restoration mechanisms of TC8 titanium alloy during hot compression in the two phase region , IOP PUBLISHING LTD,2015,89(1) ,DOI:10.1088/1757-899X/89/1/012047, ISSN:1757-8981
6. Quantitative analysis of microstructure and deformation mechanisms during isothermal compression of Ti-5Al-5Mo-5V-1Cr-1Fe alloy , ELSEVIER SCIENCE INC,2015,108,115-123 ,DOI:10.1016/j.matchar.2015.09.003, ISSN:1044-5803
7. Surface nanocrystallization and gradient structure developed in the bulk TC4 alloy processed by shot peening , Elsevier Ltd,2016,685,186-193 ,DOI:10.1016/j.jallcom.2016.05.295, ISSN:09258388
8. Detailed analysis of surface asperity deformation mechanism in diffusion bonding of steel hollow structural components , Elsevier,2016,371,407-414 ,DOI:10.1016/j.apsusc.2016.03.039, ISSN:01694332
9. The flow behavior and the deformation mechanisms of Ti-6Al-2Zr-2Sn-2Mo-1.5Cr-2Nb alloy during isothermal compression , Elsevier Ltd,2016,667,44-52 ,DOI:10.1016/j.jallcom.2016.01.164, ISSN:09258388
10. Void shrinking process and mechanisms of the diffusion bonded Ti-6Al-4V alloy with different surface roughness , SPRINGER,2016,122(1),1-8 ,DOI:10.1007/s00339-015-9546-9, ISSN:0947-8396
11. The correlation between the flow behavior and the microstructure evolution during hot working of TC18 alloy , ELSEVIER SCIENCE SA,2016,654,213-220 ,DOI:10.1016/j.msea.2015.12.040, ISSN:0921-5093
12. Dynamic globularization and restoration mechanism of Ti-5Al-2Sn-2Zr-4Mo-4Cr alloy during isothermal compression , ELSEVIER SCIENCE SA,2015,622,174-183 ,DOI:10.1016/j.jallcom.2014.10.043, ISSN:0925-8388
13. Effects of hydrogenation on microstructure of Ti-6Al-4V alloy , Hanrimwon Publishing Co., 206-3 Ojang-dong, Jung-gu,, Seoul, 100-310, Korea, Republic of,2008,,1490-1494 ,DOI:, ISSN:9788957081525
14. Efficiency of power dissipation and instability criterion for processing maps in hot forming , Tech Science Press, 5805 State Bridge Road,, suite G108, GA 30027, United States,2010,18(3),271-299 ,DOI:, ISSN:15462218
15. Mechanism in the beta phase evolution during hot deformation of Ti-5Al-2Sn-2Zr-4Mo-4Cr with a transformed microstructure , PERGAMON-ELSEVIER SCIENCE LTD,2015,94,36-45 ,DOI:10.1016/j.actamat.2015.04.045, ISSN:1359-6454
16. A constitutive equation coupling the grain size during the high temperature deformation of Ti-6.62Al-5.14Sn-1.82Zr alloy , TRANS TECH PUBLICATIONS LTD,2007,561-565(PART 1),155-158 ,DOI:, ISSN:0255-5476
17. Effect of deformation parameters on the precipitation mechanism of secondary alpha phase under high temperature isothermal compression of Ti-6A1-4V alloy , ELSEVIER SCIENCE SA,2010,527(16-17),4210-4217 ,DOI:10.1016/j.msea.2010.03.024, ISSN:0921-5093
18. Effect of the hydrogen content on the deformation behavior in the isothermal compression of Ti600 alloy , ELSEVIER SCIENCE SA,2010,527(24-25),6626-6632 ,DOI:10.1016/j.msea.2010.07.005, ISSN:0921-5093
19. Characterization of the forgeability of 1Cr11Ni2W2MoV steel using processing map , ELSEVIER SCIENCE SA,2010,527(24-25),6505-6510 ,DOI:10.1016/j.msea.2010.07.003, ISSN:0921-5093
20. Deformation behavior in the isothermal compression of Ti-5Al-5Mo-5V-1Cr-1Fe alloy , ELSEVIER SCIENCE SA,2014,589,15-22 ,DOI:10.1016/j.msea.2013.09.066, ISSN:0921-5093
21. Development of processing map coupling grain size for the isothermal compression of 300 M steel , ELSEVIER SCIENCE SA,2014,595,77-85 ,DOI:10.1016/j.msea.2013.11.083, ISSN:0921-5093
22. The study on kinetics of static recrystallization in the two-stage isothermal compression of 300M steel , ELSEVIER SCIENCE BV,2014,84,115-121 ,DOI:10.1016/j.commatsci.2013.11.056, ISSN:0927-0256
23. Flow behavior and deformation mechanism in the isothermal compression of the TC8 titanium alloy , ELSEVIER SCIENCE SA,2014,600,122-128 ,DOI:10.1016/j.msea.2014.02.002, ISSN:0921-5093
24. The flow behavior and processing maps during the isothermal compression of Ti17 alloy , ELSEVIER SCIENCE SA,2014,606,165-174 ,DOI:10.1016/j.msea.2014.03.103, ISSN:0921-5093
25. Effects of heat treatment and hot deformation on the secondary alpha phase evolution of TC8 titanium alloy , ELSEVIER SCIENCE SA,2014,613,209-216 ,DOI:10.1016/j.msea.2014.06.056, ISSN:0921-5093
26. Characterization of surface layer in TC17 alloy treated by air blast shot peening , ELSEVIER SCI LTD,2015,65,120-126 ,DOI:10.1016/j.matdes.2014.09.019, ISSN:0261-3069
27. Interaction mechanism between void and interface grain boundary in diffusion bonding , MANEY PUBLISHING,2015,20(2),123-129 ,DOI:10.1179/1362171814Y.0000000242, ISSN:1362-1718
28. Formation mechanisms of high quality diffusion bonded martensitic stainless steel joints , MANEY PUBLISHING,2015,20(2),115-122 ,DOI:10.1179/1362171814Y.0000000258, ISSN:1362-1718
29. Flow softening mechanism of Ti-5Al-2Sn-2Zr-4Mo-4Cr with different initial microstructures at elevated temperature deformation , ELSEVIER SCIENCE SA,2015,628,11-20 ,DOI:10.1016/j.msea.2015.01.034, ISSN:0921-5093
30. DETERMINATION OF THE DUCTILE PLASTIC DAMAGE VARIABLE FOR THE ANNEALED 30CRMNSI , KLUWER ACADEMIC PUBL,1990,46(4),R51-R54 ,DOI:, ISSN:0376-9429
共241篇，以下從略
學術成果
獲得國家技術發明獎貳等獎1項(《鈦合金精密鍛造成形技術》，第1完成人)，國家科技進步獎叄等獎1項(《擠壓缺陷預測》，第2完成人)，部省級科技成果獎壹等獎和貳等獎8項。發表學術論文330餘篇，SCI論文150餘篇，EI論文200餘篇，他人正面引用2000餘篇次；獲授權國家發明專利等20餘項。出版學術專著《鈦合金精密鍛造》，科學出版社，2016年；《置氫鈦合金高溫變形》，西北工業大學出版社，2015年。主要學術貢獻：
1.提出了多尺度效應下塑性變形耦合分析原理與方法。建立了面向精密塑性工程的多尺度材料模型，解決了塑性變形全過程的多場耦合分析難題，完善了塑性變形形性調控理論、耦合塑性流動的擠壓缺陷控制理論、空洞效應下的超塑性變形理論。
2.發展了精密塑性變形與智慧型新技術(精密鍛造、整體成形、數值模擬、微觀組織預測、計算機輔助設計、輕量化構件塑性變形製造)。提出了面向設計指標的變形工藝參數最佳化方法與全過程分析方法，解決了大型整體、複雜薄壁與高性能精密構件的塑性變形製造難題。
3.發明了超細晶、表層納米晶、半固態合金製備與雷射變形、電場改性新方法。發展了噴丸強化、雷射彎曲、半固態成形、冷溫擠壓、超塑性變形技術，擴大了高端金屬結構材料的套用。
榮譽獲獎
1. 國家萬人計畫百千萬工程領軍人才，中央組織部等，2016年
2. 科學中國人2015年度人物材料科學領域提名人物，《科學中國人》雜誌社，2016年
3. 新世紀百千萬人才工程國家級人選，人力資源社會保障部等，2009年
4. 第六屆中國青年科技獎獲獎者，中央組織部等，1998年
5.政府特殊津貼，國務院，1998年
6. 首屆全國優秀青年教師獎獲獎者，教育部，2000年
7. 光華科技基金獎獲獎者，國防科學技術工業委員會，1995年
8. 中國航空學會青年科技獎獲獎者，中國航空學會，1999年
