房豐洲

房豐洲

房豐洲，男，博士研究生學位，精密機械及儀器——博導、碩導，機械製造及自動化——博導、碩導，天津大學機械工程學院機械工程系機械製造及其自動化專業。應邀多次在中國、日本、美國、泰國等國家舉行的先進制造和微納加工領域的國際會議發表大會主題報告20餘次。發起在製造領域形成廣泛影響的系列納米製造國際會議（nanoMan），並擔任在新加坡舉行的第一屆會議和在中國舉行的第二屆會議的大會主席。

基本介紹

  • 中文名：房豐洲
  • 國籍：新加坡
  • 民族：漢
  • 出生地：黑龍江
  • 出生日期：1963年11月
  • 職業：天津大學精密儀器及光電子工程學院精密儀器工程系教授
  • 畢業院校：黑龍江科技大學（本科）哈爾濱工業大學（研究生）
  • 主要成就：國家重點基礎研究計畫973項目首席科學家 
  • 榮譽：長江學者特聘教授
  • 籍貫：黑龍江
  • 主講課程：微納製造（雙語課）
  • 所屬課題組：微納製造
求學經歷,工作經歷,研究方向,主要貢獻,主要著作,

求學經歷

1982年畢業於黑龍江礦業學院（現為黑龍江科技大學）。
1994年於哈爾濱工業大學獲得博士學位。

工作經歷

長江學者特聘教授。現任國際生產工程院（CIRP）通訊會員、泛太平洋製造聯盟（MIRAI）委員、《納米技術與精密工程》編委、《國際納米製造技術學報》（International Journal of Nanomanufacturing）主編、《國際精密技術學報》（International Journal of Precision Technology）編委，英國工程委員會特許工程師（CEng）。是多個國際學術會議的科學委員會委員、組委、或會議主席。1982年大學畢業後，一直從事精密加工與測量的教學與科研工作。多年從事超精密加工、複雜曲面加工和精密測量方面的研究與開發。

研究方向

超精密加工技術及裝備、微製造、微加工、光學自由曲面加工、脆性材料複雜曲面加工及超精密檢測技術加裝備。

主要貢獻

國家重點基礎研究計畫973項目：光學自由曲面製造的基礎研究
國家自然科學基金委員會“納米製造基礎研究”重大計畫重點項目
國家863計畫重點課題：脆性材料放電銑削及超聲輔助複合加工技術與裝備

主要著作

部分國際會議主題及特邀報告：
  1. Fang, F. Z., 2010, Trends of manufacturing development (plenary speech), PEI General Assembly, Jinan, China, 12-16 December。
  2. Fang, F. Z., 2010, Machining of freeform optics (plenary speech), OSA-IEEE-COS Topical Meeting on Advances in Optoelectronics and Micro/nano-optics, Guangzhou, China, 3-6 December
  3. Fang, F. Z., 2010, Mechanical processes for micro-optics (invited presentation), SPIE – Phonics Europe, Brussels, Belgium, 12-16 April.
  4. Fang, F. Z., Xu, Z. W., 2009, Nano mask fabrication based on focused ion beam milling (invited presentation), Asia Symposium for Precision Engineering and Nanotechnology (ASPEN2009), Kitakyushu, Japan, 11-13 November.
  5. Fang, F. Z., 2009, Advances in micro/nano fabrication (invited presentation), The 3rd MIRAL International Conference – Micro Fabrication and Green Manufacturing, Incheon, Korea, 14-16 October.
  6. Fang, F. Z., 2009, Development in nanomanufacturing (invited presentation), Singapore Institute of Manufacturing Technology, Singapore, 3 November.
  7. Fang, F. Z., 2009, Inspection of high aspect ratio features (invited presentation), School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore, 4 November.
  8. Fang, F. Z., 2009, Manufacturing in nanometric accuracy (invited presentation), The 2nd NSFC-NSF Joint Symposium on Nanomanufacturing, Nebraska, USA, 19-20 October.
  9. Fang, F. Z., 2009, Functional surfaces fabrication (keynote presentation), The 1st International Conference on Surface and Interface Fabrication Technologies, Wako, Japan, 16-17 July.
  10. Fang, F. Z., 2009, Micro/nano machining by mechanical tools (keynote presentation), 1st Int. Symposium on Atomically Controlled Fabrication Technology , Osaka, Japan.
  11. Fang, F. Z., 2008, Advances in machining of freeform optics (keynote presentation), 1st Int. Symposium of the Volkswagen Foundation on Functional Surfaces , Bremen, Germany.
  12. Fang, F. Z., 2008, Development in freeform optics (invited presentation), International Joint Workshop on Micro Fabrication (IJWMF2008), Taiwan, China.
  13. Fang, F. Z., 2007, Advances in freeform machining (keynote presentation), Asia Symposium on Precision Engineering and Nanotechnology (ASPEN2007), Korea.
  14. Fang, F. Z., 2007, Advances in ultra-precision machining of optical components (keynote presentation), Asia Pacific Conference on Optics Manufacture (APCOM2007), Hong Kong, China.
  15. Fang, F. Z., 2006, Advances in micro/nano machining (invited presentation), Hong Kong Polytechnic University, Hong Kong, China.
  16. Fang, F. Z., 2006, Advances in micro/nano manufacturing (keynote presentation), International Conference on Micro/Nano Fabrication Technology’06 Bangkok, Thailand.
  17. Fang, F. Z., 2005, Fundamentals in micro machining (invited presentation), Nagoya University, Japan.
  18. Fang, F. Z., 2005, Brittle-to-ductile transition in single crystal silicon (keynote presentation), TMMF2005, Tsukuba, Japan.
  19. Fang, F. Z., 2005, Micro machining of optical and bio-medical parts (invited presentation), Technological University of Malaysia, Malaysia.
  20. Fang, F. Z., 2004, Micro machining technology (invited presentation), Georgia Institute of Technology, USA.
  21. F. Z. Fang, 2003, Micro machining technologies (invited presentation), MTA2003 International Technical Forum, Singapore.
  22. F. Z. Fang, 2003, Micro machining of optical and bio components (invited presentation), Tsinghua University, China.
  23. F. Z. Fang, 2003, Development of micro machining (invited presentation), Beijing University of Aeronautics and Astronautics, China.
  24. Fang, F. Z., 2003, Micro fabrication processes (invited presentation), Seminar at National University of Singapore.
  25. Fang, F. Z, 2003, High speed machining technology (invited presentation), Workshop jointly organized by NUS and JSME, Singapore.
  26. Fang, F. Z., 2001, Cutting of hardened steels (keynote presentation), The International Conference on Advanced Manufacturing Technology – ICAMT'2001, Nanjing, China.
  27. Fang, F. Z., 2001, Hardened steel machining, Gintic (Singapore)-Georgia Tech (USA) Joint Workshops on Manufacturing Technology, Singapore.
  28. Fang, F. Z., 2000, Ultra-precision machining of brittle materials (invited presentation), Tianjin University, China.
部分學術論文：
  1. Fang, F. Z., Xu, Z. W., Hu, X. T., Wang, C. T., Luo, X. G., Fu, Y. Q., 2010, Nano-photomask fabrication using focused ion beam direct writing, CIRP Annals, Vol 59/1, pp 543-546.
  2. Gong, H.,Fang, F. Z., and Hu, X.T., 2010, Kinematic view of tool life in rotary ultrasonic side milling of hard brittle materials, International Journal of Machine Tools and Manufacture, Vol. 50/3, pp 303-307.
  3. Xu, Z. W.,Fang, F. Z., Fu, Y. Q., Zhang, S. J., Han, T. and Li, J. M., 2009, Fabrication of micro/nano-structures using focused ion beam implantation and XeF2 gas-assisted etching, Journal of Micromechanics and Microengineering, Vol. 19/5, 054003(9pp).
  4. Zhang, X. D.,Fang, F. Z., Wang, H. B., Wei, G. S. and Hu, X. T., 2009, Ultra-precision machining of sinusoidal surfaces using the cylindrical coordinate method, Journal of Micromechanics and Microengineering, Vol. 19/5, 054004(7pp).
  5. Fang, F. Z., Xu, Z. W., Hu, X. T., 2009, Fabrication and configuration of carbon nanotube probes in atomic force microscopy, CIRP Annals, Vol 58/1, pp 455-458.
  6. Fang, F. Z., Zhang, X. D., Hu, X. T., 2008, Cylindrical coordinate machining of optical freeform surfaces, Optics Express, Vol. 16, pp 7323-7329.
  7. Fang, F. Z., Xu, Z. W., Dong, S., 2007, High aspect ratio nanometrology using carbon nanotube probes in atomic force microscopy, CIRP Annals, Vol 56/1.
  8. Wu, H.,Fang, F. Z., Pei, Q. X., 2006, Study on nanometric cutting mechanism and burr formation using molecular dynamics simulation, International Journal of Nanoscience, Vol. 5, pp 547-551.
  9. Pei, Q. X., Lu, C.,Fang, F. Z., Wu, H., 2006, Molecular dynamics simulation of nanometric cutting process, International Journal of Nanoscience, Vol. 5, pp 633-638.
  10. Pei, Q. X., Lu, C.,Fang, F. Z., Wu, H., 2006, Nanometric cutting of copper: A molecular dynamics study, Computational Materials Science, Vol. 37, pp 434-441.
  11. Fang, F. Z., Xiong, Z. and Hu, X. T.,2006, An experimental study of micromachining step-mirror for laser diode beam shaping, Journal of Micromechanics and Microengineering, Vol. 16, pp 214-218.
  12. Fang, F. Z., Wu, H.,Liu, Y. C., 2005, Modeling and investigation on machining mechanism of nano-cutting monocrystalline silicon, International Journal of Machine Tools and Manufacture, Vol. 45, pp1681-1686.
  13. Fang, F. Z., Liu, Y. C., 2004, On minimum exit-burr in micro cutting, Journal of Micromechanics and Microengineering, Vol. 14, pp 984-988.
  14. Fang, F. Z., Wu, H., Liu, X. D., Liu, Y. C., and Ng, S. T., 2003, Tool geometry study in micro machining, Journal of Micromechanics and Microengineering, Vol 13, pp 726-731.
  15. Fang, F. Z., Liu, X. D., and Lee, L. C., 2003, Ultra-precision machining of brittle materials, Nanotechnology and Precision Engineering, Vol 1, pp 38-47.
  16. Fang, F. Z., Liu, X. D. and Lee, L. C., 2003, Micro machining of optical glasses, Sadhana – Academy Proceedings in Engineering Sciences, (invited), Vol 28/5, pp 945-956.
  17. Fang, F. Z., Lee, L. C., and Liu, X. D., 2005, Mean flank temperature measurement of high speed dry cutting of magnesium alloy, Journal of Materials Processing Technology, Vol 167, pp 119-123.
  18. Fang, F. Z., Venkatesh, V. C., and Zhang, G. X., 2002, Diamond turning of soft semi-conductors to obtain nanometric mirror surfaces, International Journal of Advanced Manufacturing Technology, Vol 19/9, pp 637-641.
  19. Fang, F. Z., and Zhang, G. X., 2004, An experimental study of optical glass machining, International Journal of Advanced Manufacturing Technology, Vol 23, pp 155-160.
  20. Fang, F. Z., and Zhang, G. X., 2003, An experimental study of edge radius effect in cutting single crystal silicon, International Journal of Advanced Manufacturing Technology, Vol 22, pp 703-707.
  21. Fang, F. Z.and Chen, L., 2000, Ultra-precision cutting for ZKN glass, CIRP Annals, Vol 49/1, pp 17-20.
  22. Fang, F. Z.and Venkatesh, V. C., 1998, Diamond cutting of silicon with nanometric finish, CIRP Annals, Vol 47/1, pp 45-49.
  23. Fang, F. Z., 1998, Nano-turning of single crystal silicon, Journal of Materials Processing Technology, Vol 82, pp 95-101.
  24. Venkatesh, V. C.,Fang, F. Z.and Chee, W. K., 1997, On mirror surfaces obtained with and without polishing, CIRP Annals, Vol 46/1, pp 505-508.
  25. Fang, F. Z.and Zhang, G. X., 1996, On AOM laser measuring system, Manufacturing Technology & Machine Tool, No.6, pp 8-11.
  26. Fang, F. Z.and Dong, S., 1995, X-ray interferometry for nanometric measurement, Chinese Journal of Scientific Instrument, Vol.16, No.1.
  27. Fang, F. Z.and Yuan, Z. J., 1994, An open measuring system for ultra-precision machine tools, Manufacturing Technology & Machine Tool, No.7, pp 17-19.
  28. Fang, F. Z.and Yuan, Z. J., 1994, Positioning and measuring technique on ultra-precision turning machines, China Mechanical Engineering, Vol.5, No.2, pp 49-51.
  29. Fang, F. Z., Liu, Y. C., Hu, X., 2006, Machining monocrystalline silicon without cracks, Proc. !st Topical Meeting on Microfactories, pp 25-30.
  30. Fang, F. Z., Liu, Y. C., 2006, Energy variation of micro-cracking on single crystal silicon, Proc. SPIE Vol. 6344, pp 366-371.
  31. Fang, F. Z., Wu, H., Liu, X. D., Lim, G. C., Liu, Y. C., and Ng, S. T., 2003, Fabrication of micro grooves, ASPE 18th Annual Meeting, Portland, USA, Oct.
  32. Fang, F. Z., Lee, L. C., Liu, X. D., 2002, Experimental study of high speed milling of hardened steel with CL mist and chilled air, International Conference on Precision Engineering & Nanotechnology – ICPN’2002, Changsha, China, pp 251-256.
  33. Fang, F. Z., Thoe, T. B., Song, W. and Shaw, K. C., 2000, Energy dissipation in high speed milling, ICoPE-2000, Singapore, pp 486-491.
  34. Fang, F. Z., Lee, L. C., Song, W., Thoe, T. B. and Liu, X. D., 2000, Study on high speed milling of hardened steel, ICAMT-2000, Malaysia, pp 403-408.
  35. Fang, F. Z., 1999, Mirror surface finishing for gallium arsenide, ASPE 15th Annual Meeting, USA, Nov, pp 62-66.
  36. Fang, F. Z., and Ngoi, K. A., 1998, Two-frequency laser measuring technique with high axis-velocity, Proceeding of SPIE, Vol 3407, 454-457.
  37. Fang, F. Z., Venkatesh, V. C., 1997, On high quality diamond turned silicon surfaces, ASPE 13rd Annual Meeting, USA, Nov, pp 220-223.
  38. Fang, F. Z.and Zhang, G. X., 1996, The principle of AOM laser heterodyne measuring and its instrument, SPIE, Vol 2899, pp 599-602.
Books and Journals:
1.Fang, F. Z.and Luo, J., guest editor, 2009, Journal of Vacuum Science & Technology B, Vol 27/3
2. 房豐洲，宮虎，張效棟，郭彤，2009，複雜曲面加工領域科學技術發展研究，機械工程學科發展報告，中國科學技術出版社.
3. Luo, J. and Fang, F. Z., guest editor, Journal of Micromechanics and Microengineering, Vol 19/5.
4. Fang, F. Z., Liu, K., T. Kurfess, and Lim, G. C., 2005, Tool-based Micro Machining and Applications in MEMS, MEMS/NEMS Handbook: Techniques and Applications, edited by C. T. Leondes, published by Kluwer Academic Press, Massachusetts, USA, Vol III, pp 63-126.

相關詞條

熱門詞條

聯絡我們