基本介紹
- 中文名：
- 畢業院校：
- 學位/學歷：
- 職業：
- 專業方向：
- 任職院校：
人物經歷,學習經歷,工作經歷,研究方向,教授課程,學術成果,科研項目,發表論文,申請專利,獲獎記錄,
人物經歷
學習經歷
工作經歷
研究方向
教授課程
學術成果
科研項目
發表論文
(6) Surface asperity evolution and microstructure analysis of Al 6061T5 alloy in a quasi-static cold uniaxial planar compression(CUPC) Applied Surface Scieuce 347 (2015) 193-201 SCI
(7) Theory and experimental research on the process of rolling shape slab，J.MPT, v 121, n 2-3, Feb 28, 2002, p 182-188
(8) Model Buiding of Backup Roller Diameter Effct Rate in 4-High Mill，J.MST Vol.20, No.4, 2004, p1-3
(9) A Method to Analyse of Roll Bending Force Effect Rate in 4-high Hot Strip Mill，Key Engineering Materials
(10) 異型扁坯軋制過程的剛塑性有限元分析，機械工程學報, v 36, n 9, Sep, 2000, p 11-15
(11) 入口楔形對中厚板側彎影響規律，東北大學學報（自然科學版），2012，33（12）：1731 ~ 1733
(12) 單位寬度軋制力對熱軋帶鋼凸度的影響規律，東北大學學報（自然科學版），2003，24（3）：280 ~ 283
(13) 大凸度支撐輥帶鋼凸度的控制能力，東北大學學報（自然科學版），2003，24（2）：151 ~ 154
(14) 工作輥彎輥力對熱軋帶鋼凸度的影響，鋼鐵研究學報，2003，15（5）：23 ~ 27
(15) 四軋輥機軋輥彈性變形解析模組的開發，軋鋼，2003，20（2）：8 ~ 11
(16) 軋輥直徑對熱軋帶鋼凸度的影響規律，東北大學學報（自然科學版），2002，23（12）：1170 ~ 1173
(17) Effects of temperature and strain rate on microstructure and mechanical properties of high chromium cast iron/low carbon steel bimetal prepared by hot diffusion-compression bonding, Materials and Design, 2014, 63: 650-657
(18) 熱帶終軋溫度計算的逐步回歸分析模型，東北大學學報（自然科學版），2007，28（4）：522 ~524+528
(19) A Fadavi Boostani#, R Taherzadeh Mousavian, S Tahamtan, S Yazdani, R Azari Khosroshahi, Dongbin Wei, Jianzhong Xu, Xiaoming Zhang, Zhengyi Jiang*, Solvothermal-assisted Graphene Encapsulation of SiC Nanoparticles: A New Horizon toward Toughening Aluminium Matrix Nanocomposites, Materials Science and Engineering A, 2016, A653: 99-107
(20) A Fadavi Boostani#, S Tahamtan, Zhengyi Jiang*, Dongbin Wei, S Yazdani, R Azari Khosroshahi, R Taherzadeh Mousavian, Jianzhong Xu, Xiaoming Zhang, Dianyao Gong, Enhanced Tensile Properties of Aluminium Matrix Composites Reinforced with Graphene Encapsulated SiC Nanoparticles, Composites part A-Applied Science and Manufacturing, 2015, 68: 155-163
(21) A Fadavi Boostani#, R Taherzadeh Mousavian, S Tahamtan, S Yazdani, R Azari Khosroshahi, Dongbin Wei, Jianzhong Xu, Dianyao Gong, Xiaoming Zhang, Zhengyi Jiang*, Graphene Sheets Encapsulating SiC Nanoparticles: A Roadmap towards Enhancing Tensile Ductility of Metal Matrix Composites, Materials Science and Engineering A, 2015, A648: 92-103
(22) A Fadavi Boostani#, S Yazdani, R Taherzadeh Mousavian, S Tahamtan, R Azari Khosroshahi, Dongbin Wei, D Brabazon, Jianzhong Xu, Xiaoming Zhang, Zhengyi Jiang*, Strengthening Mechanisms of Graphene Sheets in Aluminium Matrix Nanocomposites, Materials and Design, 2015, 88: 983-989
(23) Hejie Li#,*, Zhengyi Jiang, Dongbin Wei, Xingjian Gao*, Jianzhong Xu, Xiaoming Zhang, Surface Asperity Evolution and Microstructure Analysis of Al6061T5 Alloy in a Quasi-static Cold Uniaxial Planar Compression (CUPC), Applied Surface Science, 2015, 347: 193-201
(24) Hejie Li#,*, Zhengyi Jiang, Dongbin Wei, Jianzhong Xu, Xiaoming Zhang, Dianyao Gong, Jiangtao Han, Study on Surface Asperity Flattening in Cold Quasi-static Uniaxial Planar Compression by Crystal Plasticity Finite Element Method, Tribology Letters, 2015, 58(3): 46-55
(25) Zhengyi Jiang#, Xingjian Gao*, Shengli Li, Hongmei Zhang, Dengfu Chen, Jianzhong Xu, Interface Analysis and Hot Deformation Behavior of a Novel Laminated Composite with High-Cr Cast Iron and Low Carbon Steel Prepared by Hot Compression Bonding, Journal of Iron and Steel Research, International, 2015, 22(5): 438-445
(26) Xingjian Gao#, Zhengyi Jiang*, Dongbin Wei, Hejie Li, Sihai Jiao, Jianzhong Xu, Xiaoming Zhang, Jiangtao Han, Dafu Chen, Constitutive Analysis for Hot Deformation Behavior of Novel Bimetal Consisting of Pearlitic Steel and Low Carbon Steel, Materials Science and Engineering A, 2015, A648: 92-103
(27) Kezhi Linghu#, Zhengyi Jiang*, Jingwei Zhao, Fei Li, Dongbin Wei, Jianzhong Xu, Xiaoming Zhang, Xiaoming Zhao, 3D FEM analysis of strip shape during multi-pass rolling in a 6-high CVC cold rolling mill, International Journal of Advanced Manufacturing Technology, 2014, 74: 1733-1745
(28) Haijun Li#,*, Jianzhong Xu, Guodong Wang, Lijun Shi, Yong Xiao, Development of Strip Flatness and Crown Control Model for Hot Strip Mills, Journal of Iron and Steel Research, International, 2010, 17(3): 21-27
(29) Yu Hu#, Dianyao Gong*, Zhengyi Jiang, Jianzhong Xu, Dianhua Zhang, Xianghua Liu, Effect of Initial Crown on Shape of Hot Rolled Strip, Journal of Iron and Steel Research, International, 2009, 16(5): 32-34
(30) 趙旭亮，龔殿堯*，徐建忠，張殿華，熱帶軋機支撐輥輥型曲線的影響因素，東北大學學報（自然科學版），2009，30（5）：677 ~680
(31) 李海軍*，徐建忠，王國棟，熱軋帶鋼精軋過程高精度軋制力預測模型，東北大學學報（自然科學版），2009，30（5）：669 ~672
(32) 胡宇，龔殿堯*，徐建忠，劉相華，四輥軋機熱軋帶鋼板形的急停測量實驗研究，東北大學學報（自然科學版），2009，30（4）：547 ~550
(33) 李海軍*，時立軍，徐建忠，王國棟，帶鋼熱連軋機組溫度模型及其自學習方法，東北大學學報（自然科學版），2009，30（3）：369 ~372
(34) 趙旭亮*，張殿華，徐建忠，劉相華，熱帶軋機工作輥初始輥型曲線的設計，東北大學學報（自然科學版），2008，29（11）：1585 ~1588
(35) 趙旭亮*，王淑君，徐建忠，張殿華，四輥軋機軋輥彈性變形的研究，東北大學學報（自然科學版），2008，29（6）：834 ~837
(36) 郭忠峰*，徐建忠，李長生，劉相華，幾類典型軋輥橫移變凸度輥型的比較與分析，東北大學學報（自然科學版），2008，29（6）：830 ~833
(37) 郭忠峰*，徐建忠，劉相華，1700熱連軋機軋輥溫度場及熱凸度研究，東北大學學報（自然科學版），2008，29（4）：517 ~520
(38) 郭忠峰*，徐建忠，劉相華，1700熱連軋機軋輥磨損模型研究，東北大學學報（自然科學版），2007，28（10）：1378 ~1380
(39) Zhongfeng Guo#,*, Jianzhong Xu, Changsheng Liu, Xianghua Liu, Shape Setup System for 1700 Hot Strip Mill, Journal of Iron and Steel Research, International, 2007, 14(5): 27-30
(40) Dianyao Gong#,*, Jianzhong Xu, Lianggui Peng, Guodong Wang, Xianghua Liu, Journal of Iron and Steel Research, International, 2007, 14(4): 11-14
(41) Haijun Li#,*, Jianzhong Xu, Guodong Wang, Xianghua Liu, Improvement on Conventional Load Distribution Algorithm in Hot Tandem Mills, Journal of Iron and Steel Research, International, 2007, 14(2): 36-41
(42) Jianzhong Xu#,*, Dianyang Gong, Zhengyi Jiang, Xianghua Liu, Guodong Wang, Mechanics of Design and Model Development of CVC-plus Roll Curve, Advanced Materials Research, 2012, 418-420: 1158-1166, 2nd International Conference on Advances in Materials and Manufacturing, Guilin, P.R. China, 2011.12.16-12.18
(43) Dianyao Gong, Jianzhong Xu*, Zhengyi Jiang, Xiaoming Zhang, Xianghua Liu, Guodong Wang, Effects of Asymmetrical Stand Stiffness on Hot Rolled Strip Shape , International Journal of Modern Physics B, 2008, 22(31-32): 5734-5739, 9th Asia-Pacific Symposium on Engineering Plasticity and Its Applications, Daejeon, South Korea, 2008.10.20-10.24
(44) Zhengyi Jiang, Xingjian Gao*, Dongbin Wei, Shengli Li, Hongmei Zhang, Jianzhong Xu, Di Wu, Sihai Jiao, Effect of carbide orientation on sliding wear behavior of high chromium cast iron, Advanced Materials Research, 2015, 806: 567-572, 17th International Symposium on Advances in Abrasive Technology, Hawaii, United States of America, 2014.9.22-9.25
(45) Jiang Zonglin, Experiments and Development of Long-test-duration Hypervelocity Detonation-driven Shock Tunnel , 2014 AIAA Science and Technology Forum and Exposition, National Harbor, Maryland , 13 - 17 January 2014
申請專利
熱軋鋼材控冷系統穩壓節能供水裝置 實用新型
獲獎記錄
(1) “板帶鋼軋制過程的智慧型最佳化及數模調優”2001年獲得國家科技進步二等獎；
(2)“剛塑性有限元可壓縮法的若干理論問題”2001年獲得遼寧省自然科學三等獎；
(3)“人工智慧及其在軋制中的套用”2000年獲得遼寧省科技進步二等獎；
(4) “智慧型化信息處理系統的建立與套用研究”1999年獲得遼寧省教委科技進步一等獎；
(5) “剛塑性有限元理論與套用”1999年獲得國家冶金局科技進步二等獎；
(6) “粗軋區板坯橫向變形規律的研究”1999年獲得遼寧省科技進步三等獎。
