彭慶宇，男，漢族，教授，任職於哈爾濱工業大學航天學院複合材料與結構研究所與特種環境複合材料技術國家級重點實驗室。
基本介紹
- 中文名：彭慶宇
- 學位/學歷：博士
- 職業：教師
- 專業方向：輕質複合材料與結構
- 任職院校：哈爾濱工業大學
人物經歷,研究方向,學術成果,論文期刊,發明專利,主講課程,榮譽獎項,社會兼職,
人物經歷
工作經歷
2014年11月-2018年12月 哈爾濱工業大學 航天學院 副教授（青年拔尖）
2019年1月-今 哈爾濱工業大學 航天學院 教授（青年拔尖）
教育經歷
1. 2004年9月-2008年7月，哈爾濱工業大學，航天學院，複合材料與工程，學士學位
2. 2008年9月-2010年7月，哈爾濱工業大學，航天學院，材料學，碩士學位
3. 2010年9月-2014年7月，哈爾濱工業大學，航天學院，材料學，博士學位
研究方向
納米碳巨觀體及其複合材料
輕質複合材料與結構
變剛度驅動智慧型複合材料與結構
學術成果
論文期刊
2019年
L. L. Xu, Q. Y. Peng（通訊作者）, Y. Zhu, X. Zhao, M. L. Yang, S. S. Wang, F. H. Xue, Y. Yuan, Z. S. Lin, F. Xu, X. X. Sun, J. J. Li, W. L. Yin, Y. B. Li, X. D. He, Artificial muscle with reversible and controllable deformation based on stiffness-variable carbon nanotube spring-like nanocomposite yarn. NANOSCALE, 2019, 11, 17. (IF=6.97)
Q. Chen, Q. Y. Peng（通訊作者）, Zhao Xu, et al. Grafting carbon nanotubes densely on carbon fibers by poly(propylene imine) for interfacial enhancement of carbon fiber composites. Carbon, 2019.11.14. (IF=7.466)
X. Zhao, L. L. Xu, Q. Chen , Q. Y. Peng（通訊作者）et al. Highly Conductive Multifunctional rGO/CNT Hybrid Sponge for Electromagnetic Wave Shielding and Strain Sensor. Advanced Materials Technologies, 2019.08.08. (IF=5.395)
Y. Li, S. S. Wang, Q. Y. Peng（通訊作者）, et al. Active control of graphene-based membrane-type acoustic metamaterials using a low voltage. Nanoscale, 2019.08.07. (IF=6.97)
Y. Y. Qin, Q. Y. Peng（通訊作者）, Y. Zhu, et al. Lightweight, mechanically flexible and thermally superinsulating rGO/polyimide nanocomposite foam with an anisotropic microstructure. Nanoscale Advances, 2019.10.27.
Y. Li, L. Sun, F. Xu, S. S. Wang, Q. Y. Peng, Z. Y. Yang, X. D. He, Y. B. Li, Electromagnetic and acoustic double-shielding graphene-based metastructures. NANOSCALE, 2019, 11, 4. (IF=6.97)
M. L. Yang, Y. Yuan, W. L. Yin, S. Yang, Q. Y. Peng, J. J. Li, Y. B. Li, X. D. He, Co/CoO@C nanocomposites with a hierarchical bowknot-like nanostructure for high performance broadband electromagnetic wave absorption. APPLIED SURFACE SCIENCE, 2019. (IF=5.155)
2018年
Y. Yuan, W. L. Yin, M. L. Yang, F. Xu, X. Zhao, J. J. Li, Q. Y. Peng, X. D. He, S. Y. Du, Y. B. Li, Lightweight, flexible and strong core-shell non-woven fabrics covered by reduced graphene oxide for high-performance electromagnetic interference shielding. CARBON, 2018. (IF=7.088)
F. Xu, R. F. Chen, Z. S. Lin, X. X. Sun, S. S. Wang, W. L. Yin, Q. Y. Peng（通訊作者）, Y. B. Li, X. D. He, Variable densification of reduced graphene oxide foam into multifunctional high-performance graphene paper. JOURNAL OF MATERIALS CHEMISTRY C, 2018, 6, 48. (IF=5.688)
F. Xu, R. F. Chen, Z. S. Lin, Y. Y. Qin, Y. Yuan, Y. Li, X. Zhao, M. L. Yang, X. X. Sun, S. S. Wang, Q. Y. Peng（通訊作者）, Y. B. Li, X. D. He, Superflexible Interconnected Graphene Network Nanocomposites for High-Performance Electromagnetic Interference Shielding. ACS OMEGA, 2018, 3, 3.
2017年
Q. Y. Peng, Y. Y. Qin, X. Zhao, X. X. Sun, Q. Chen, F. Xu, Z. S. Lin, Y. Yuan, Y. Li, J. J. Li, W. L. Yin, C. Gao, F. Zhang, X. D. He, Y. B. Li, Superlight, Mechanically Flexible, Thermally Superinsulating, and Antifrosting Anisotropic Nanocomposite Foam Based on Hierarchical Graphene Oxide Assembly. ACS APPLIED MATERIALS & INTERFACES, 2017, 9, 50. (IF=8.284)
Y. Yuan, X. X. Sun, M. L. Yang, F. Xu, Z. S. Lin, X. Zhao, Y. J. Ding, J. J. Li, W. L. Yin, Q. Y. Peng, X. D. He, Y. B. Li, Stiff, Thermally Stable and Highly Anisotropic Wood-Derived Carbon Composite Monoliths for Electromagnetic Interference Shielding. ACS APPLIED MATERIALS & INTERFACES, 2017, 9, 25. (IF=8.284)
Y. Li, F. Xu, Z. S. Lin, X. X. Sun, Q. Y. Peng, Y. Yuan, S. S. Wang, Z. Y. Yang, X. D. He, Y. B. Li, Electrically and thermally conductive underwater acoustically absorptive graphene/rubber nanocomposites for multifunctional applications. NANOSCALE, 2017, 9, 38. (IF=7.713)
Y. Yuan, L. Y. Liu, M. L. Yang, T. L. Zhang, F. Xu, Z. S. Lin, Y. J. Ding, C. H. Wang, J. J. Li, W. L. Yin, Q. Y. Peng, X. D. He, Y. B. Li, Lightweight, thermally insulating and stiff carbon honeycomb-induced graphene composite foams with a horizontal laminated structure for electromagnetic interference shielding. CARBON, 2017. (IF=7.088)
J. J. Li, Y. F. Wu, M. L. Yang, Y. Yuan, W. L. Yin, Q. Y. Peng, Y. B. Li, X. D. He, Electrospun Fe2O3 nanotubes and Fe3O4 nanofibers by citric acid sol-gel method. JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2017. (IF=2.971)
J. J. Li, Y. F. Wu, J. G. Cao, Z. L. Wei, Y. Guo, Q. Wang, Q. Y. Peng, Y. B. Li, X. D. He, Excellent flexibility of high-temperature-treated SiO2-TiO2 hybrid fibres and their enhanced luminescence with Eu3+ doping. CERAMICS INTERNATIONAL, 2017. (IF=2.882)
2016年
Q. Y. Peng , H. Q. Wei, Y. Y. Qin, Z. S. Lin, X. Zhao, F. Xu, J. S. Leng, X. D. He, A. Y. Cao, Y. B. Li, Shape-memory polymer nanocomposites with a 3D conductive network for bidirectional actuation and locomotion application. NANOSCALE, 2016, 8, 42. (IF=7.713)
C. H. Wang, Y. J. Ding, Y. Yuan, A. Y. Cao, X. D. He, Q. Y. Peng, Y. B. Li, Multifunctional, Highly Flexible, Free-Standing 3D Polypyrrole Foam. SMALL, 2016, 12, 30. (IF=9.061)
Y. Yuan, Y. J. Ding, C. H. Wang, F. Xu, Z. S. Lin, Y. Y. Qin, Y. Li, M. L. Yang, X. D. He, Q. Y. Peng（通訊作者）, Y. B. Li, Multifunctional Stiff Carbon Foam Derived from Bread. ACS APPLIED MATERIALS & INTERFACES, 2016, 8, 26. (IF=8.284)
Y. J. Ding, J. Q. Zhu, C. H. Wang, B. Dai, Y. X. Li, Y. Y. Qin, F. Xu, Q. Y. Peng, Z. Z. Yang, J. Bai, W. X. Cao, Y. Yuan, Y. B. Li, Multifunctional three-dimensional graphene nanoribbons composite sponge. CARBON, 2016. (IF=7.088)
2015年
Y. Y. Qin(學生), Q. Y. Peng（共同一作，副導師）, Y. J. Ding, Z. S. Lin, C. H. Wang, Y. Li, J. J. Li, Y. Yuan, X. D. He, Y. B. Li, Lightweight, Superelastic, and Mechanically Flexible Graphene/Polyimide Nanocomposite Foam for Strain Sensor Application.ACS Nano,2015,9(9). (IF=13.709)
Y. Y. Shang, C. H. Wang, X. D. He, J. J. Li, Q. Y. Peng, E. Z. Shi, R. G. Wang, S. Y. Du, A. Y. Cao, Y. B. Li, Self-stretchable, helical carbon nanotube yarn supercapacitors with stable performance under extreme deformation conditions. NANO ENERGY, 2014, 12. (IF=13.12)
C. H. Wang, Y. B. Li, X. D. He, Y. J. Ding, Q. Y. Peng, W. Q. Zhao, E. Z. Shi, S. T. Wu, A. Y. Cao, Cotton-derived bulk and fiber aerogels grafted with nitrogen-doped graphene. NANOSCALE, 2015, 7, 17. (IF=7.713)
C. Wang, X. D. He, L. Y. Tong, Q. T. Luo, Y. B .Li, Q. Song, X. J .Lv, Y. Y. Shang, Q. Y. Peng, J. J. Li, Tensile failure mechanisms of individual junctions assembled by two carbon nanotubes. COMPOSITES SCIENCE AND TECHNOLOGY,2015. (IF=5.202)
Y. T. Yao, H. B. Lu, J. J. Li, Q. Y. Peng, Q. Wang, Y. B. Li, X. D. He, J. S. Leng, Electrospun silica-based inorganic/organic hybrid membranes with tunable performance in appropriate solvent systems. RSC ADVANCES, 2015, 5. (IF=3.096)
Y. Y. Shang, X. D. He , C. H. Wang, L. Y. Zhu, Q. Y. Peng, E. Z. Shi, S. T. Wu, Y. B. Yang, W. J. Xu, R. G. Wang, S. Y. Du, A. Y. Cao, Y. B. Li, Large-Deformation, Multifunctional Artificial Muscles Based on Single-Walled Carbon Nanotube Yarns. ADVANCED ENGINEERING MATERIALS, 2015. (IF=2.516)
2014年
Q. Y. Peng, Y. B. Li, X. D. He, X. C. Gui, Y. Y. Shang, C. H. Wang, C. Wang, W. Q. Zhao, S. Y. Du, E. Z. Shi, P. X. Li, D. H. Wu, A. Y. Cao, Graphene nanoribbon aerogels unzipped from carbon nanotube sponges. Advanced Materials, 2014. (IF=15.409)
C. Wang, Q. Y. Peng(共同一作), J. Y. Wu, X. D. He, L. Y. Tong, Q. T. Luo, J. J. Li, S. Moody, H. W. Liu, R. G. Wang, S. Y. Du, Y. B. Li, Mechanical characteristics of individual multi-layer graphene-oxide sheets under direct tensile loading. Carbon, 2014. (IF=6.160)
C. H. Wang, X. D. He, Y. Y. Shang, Q. Y. Peng, Y. Y. Qin, E. Z. Shi, Y. B. Yang, S. T. Wu, W. J. Xu, S.Y. Du, A. Y. Cao and Y.B. Li. Multifunctional graphene sheet-nanoribbon hybrid aerogels. Journal of Materials Chemistry A, 2014. (IF=6.626)
C. Wang, Y. B. Li, L. Y. Tong, Q. Song, K. Z. Li, J. J. Li, Q. Y. Peng, X. D. He, R. G. Wang, W. C. Jiao, S. Y. Du, The role of grafting force and surface wettability in interfacial enhancement of carbon nanotube/carbon ？ber hierarchical composites. Carbon, 2014. (IF=6.160)
W. Q. Zhao, Y. B. Li, S. S. Wang, X. D. He, Y. Y. Shang, Q. Y. Peng, C. Wang, S. Y. Du, X. C. Gui, Y. B. Yang, Q. Yuan, E. Z. Shi, S. T. Wu, W. J. Xu, A. Y. Cao, Elastic improvement of carbon nanotube sponges by depositing amorphous carbon coating. Carbon, 2014. (IF=6.160)
P. X. Li, E. Z. Shi, Y. B. Yang, Y. Y. Shang, Q. Y. Peng, S. T. Wu, J. Q. Wei, K. L. Wang, H. W. Zhu, Q. Yuan, A. Y. Cao and D. H. Wu. Carbon nanotube-polypyrrole core-shell sponge and its application as highly compressible supercapacitor electrode. Nano Research, 2014, 7(2). (IF=6.963)
2013年
Q. Y. Peng, Y. B. Li, X. D. He, H. Z. Lv, P. A. Hu, Y. Y. Shang, C. Wang, R. G. Wang, T. Sritharan, S. Y. Du, Interfacial enhancement of carbon fiber composites by poly(amido amine) functionalization. Composites Science and Technology, 2013. (IF=3.633)
J. K. Sun, Y. H. Li, Q. Y. Peng, S. C. Hou, D. C. Zou, Y. Y. Shang, Y. B. Li, P. X. Li, Q. J. Du, Z. H. Wang, Y. Z Xia, L. H. Xia, X. L. Li, and A. Y. Cao. Macroscopic, Flexible, High-Performance Graphene Ribbons. ACS nano, 2013. (IF=12.033)
Y. B. Li, Y. Y. Shang, X. D. He, Q. Y. Peng, S. Y. Du, E. Z. Shi, S. T. Wu, Z. Li, P. X. Li, and A. Y. Cao. Overtwisted, Resolvable Carbon Nanotube Yarn Entanglement as Strain Sensors and Rotational Actuators. ACS nano, 2013, 7(9). (IF=12.033)
C. Wang, X. D. He, L. Y. Tong, Q. Y. Peng, R. G. Wang, Y. B. Li, Y. X. Li, Theoretical prediction and experimental verification of pulling carbon nanotubes from carbon fiber prepared by chemical grafting method. Composites: Part A, 2013. (IF=3.012)
Y. X. Li, Y. B. Li, Y. J. Ding, Q. Y. Peng, C. Wang, R. G. Wang, T. Sritharan, X. D. He, S. Y. Du, Tuning the interfacial property of hierarchical composites by changing the grafting density of carbon nanotube using 1,3-propodiamine. Composites Science and Technology, 2013. (IF=3.633)
X. J. Zhang, Y. B. Li, Z. Y. Zhu, J. W. Zhang, Q. Y. Peng, X. D. He, Microstructure, mechanical and oxidation properties of in-situ synthesized (Y2O3 + TiC)/Ti-4.5Si composites. International Journal of Materials Research, 2013, 104(1). (IF=0.675)
2012年
Q. Y. Peng, X. D. He, Y. B. Li, C. Wang, R. G. Wang, P. A. Hu, Y. D. Yan, T. Sritharan, Chemically and uniformly grafting carbon nanotubes onto carbon fibers by poly(amidoamine) for enhancing interfacial strength in carbon fiber composites. Journal of Materials Chemistry, 2012. (IF=6.626)
Y. B. Li(導師), Q. Y. Peng, X. D. He, P. A. Hu, C. Wang, Y. Y Shang, R. G. Wang, W. C. Jiao, H. Z, Lv, Synthesis and characterization of a new hierarchical reinforcement by chemically grafting graphene oxide onto carbon fibers. Journal of Materials Chemistry, 2012. (IF=6.626, 內封面報導)
Q. W. Guo, Q. Y. Peng, Y. B. Li, L. Mei. Dependence of amino- functionalization on interfacial adhesion strength in epoxy/Al laminated composites. Polymers & Polymer Composites, 2012, 20(5). (IF=0.255)
Y. Y. Shang, X. D. He, Y. B. Li, L. H. Zhang, Z. Li, C. Y. Ji, E. Z. Shi, P. X. Li, K. Zhu, Q. Y. Peng, C. Wang, X. J. Zhang, R. G. Wang, J. Q. Wei, K. L. Wang, H. W. Zhu, D. H. Wu, A. Y. Cao, Super-stretchable spring-like carbon nanotube ropes. Advanced Materials, 2012. (IF=15.409, 封底報導)
X. D. He, C. Wang, L. Y. Tong, R. G. Wang, A. Y. Cao, Q. Y. Peng, S. Moody, Y. B. Li, Direct measurement of grafting strength between an individual carbon nanotube and a carbon fiber. Carbon, 2012.(IF=6.160, 封面報導)
X. D. He, C. Wang, L. Y. Tong, Y. B. Li, Q. Y. Peng, L. Mei, A pullout model for inclined carbon nanotube. Mechanics of Materials, 2012. (IF=2.225)
2011年
L. Mei, X. D. He, Y. B. Li, Q. Y. Peng, R. G. Wang, J. Xu. Enhancement of composite-metal interfacial adhesion strength by dendrimer. Surface and Interface Analysis, 2011, 43(3).(IF=1.393)
L. Mei, Y. B. Li, R. G. Wang, C. Wang, Q. Y. Peng, X. D. He. Multiscale Carbon Nanotube-Carbon Fiber Reinforcement for Advanced Epoxy Composites with High Interfacial strength. Polymers & Polymer Composites, 2011, 19(2-3).(IF=0.255)
X. J. Zhang, Y. B Li, G. P. Song, Y. Sun, Q. Y. Peng, Y. B. Li and X. D. He, Microstructure and mechanical properties of in situ TiC and Nd2O3 particles reinforced Ti-4.5 wt.%Si alloy composites. Materials & Design, 2011. (IF=3.171)
2010年
M. Lei, X. D. He, Y. B. Li, R. G. Wang, C. Wang, Q. Y. Peng, Grafting carbon nanotubes onto carbon fiber by use of dendrimers. Materials Letters, 2010. (IF=2.269)
發明專利
一種石墨烯/銅納米線複合薄膜的製備方法及薄膜 中國 ZL201610789083.6
高強度高耐磨鉸刀齒及其熱處理方法 中國 ZL201410264626.3
一種疏浚挖泥船鉸刀齒及其製備方法 中國 ZL201410264628.2
樹枝狀大分子修飾碳纖維的方法 中國 ZL200910311146.7
一種增強金屬/環氧樹脂複合材料界面性能的方法 中國 ZL200910311222.4
主講課程
《材料力學性能分析》
《複合材料表征技術》
榮譽獎項
2018年 第三屆中國軍民兩用技術創新套用大賽-銅獎
2017年 入選中國科協“青年人才托舉工程”
2016年 首屆中國複合材料優秀博士學位論文
2016年 榮獲黑龍江省科學技術獎（自然科學類）
2015年 哈爾濱工業大學第十七屆優秀博士學位論文
2014年 哈工大優秀畢業生
2013年 首屆哈工大國家開發銀行科技創新獎 哈爾濱工業大學
2012年 學術新人獎 教育部
2012年 榮獲首屆博士研究生國家講學金 教育部
2012年 榮獲中航成都飛機設計所“騰龍”獎學金 哈爾濱工業大學航天學院
社會兼職
1. 中國科協軍民融合學會聯合體青托聯合會主席團成員
2. 中國複合材料學會青年工作委員會委員
3. 中國複合材料學會會員
