張曉明(東北大學教授)

張曉明，男，博士，東北大學軋制技術及連軋自動化國家重點實驗室教授。

基本介紹

• 中文名：張曉明
• 職業：教師
• 畢業院校：東北大學
• 學位/學歷：博士
• 專業方向：材料成形過程的摩擦與潤滑、短流程近終成形理論與新技術等
• 任職院校：東北大學

人物經歷

學習經歷

1983.9~1987.8東北大學金屬壓力加工系學士

1987.9~1990.1東北大學研究生院碩士

2000.3~2005.1東北大學研究生院博士

工作經歷

1996.9~2001.5軋制技術及連軋自動化國家重點實驗室講師

2001.6~2008.1軋制技術及連軋自動化國家重點實驗室副教授

2008.1~至今 軋制技術及連軋自動化國家重點實驗室教授

教授課程

1 承擔的本科生課程：材料成型與工藝（中），32學時

2 指導本科生課程設計、畢業設計，認識實習，畢業實習，畢業論文

3 承擔的碩士研究生課程：近終形成形理論與工藝，16學時

研究方向

材料成形過程的摩擦與潤滑、短流程近終成形理論與新技術、材料成形過程的組織性能最佳化與控制

學術成果

科研項目

1.雙輥鑄軋複合帶材製備方法的基礎研究，國家自然科學基金面上項目，2005.01~2007.12

短流程成形加工過程組織性能演化模擬，國家重點基礎研究發展規劃（973項目），2006.9～2011.8

2.基於雙輥薄帶連鑄的高品質矽鋼織構控制理論與工業化技術研究，國家基金委重點基金項目，2008.1～2011.12

3.不鏽鋼與碳鋼混合軋制連軋機組軋制油選擇及潤滑研究，寶鋼，2009.02～2010.06

4.納米鐵粉對冷軋潤滑作用的機理研究，國家自然科學基金面上項目，2009.1～2011.12

5.液氮低溫冷卻條件下的冷軋潤滑機理研究，國家自然科學基金面上項目，2011.1～2013.12

6.冷連軋機軋制潤滑工藝研究，寶鋼，2011.2～2012.07

7.多輥軋機工藝潤滑對軋制過程的影響研究，寧波不銹，2013.07～2015.07

8.高合金材料軋制過程中組織性能智慧型化預測理論與技術，國家重點基礎研究發展規劃（973項目），2011.01~2015.12

9.單機架軋機軋制規程最佳化研究，寶鋼，2015.04～2016.12

10.湛江2030冷連軋機軋制油優選研究，寶鋼，2015.03～2016.12

11.18輥單機架軋制潤滑過程實驗及模擬研究，寶鋼，2015.04～2016.12

12.低密度中錳高鋁復相汽車用鋼變形行為及物理模型的研究，國家自然科學基金項目，2015.01～2017.12

發表論文

1.Zhang Xiaoming，Jiang Zhengyi，Liu Xianghua，Wang Guodong. Analysis of slab edging by a 3-D rigid visco-plastic finite element method. Chinese Journal of mechanical engineering ,2002,15(1):48~52

2.Zhang, X.M., Jiang, Z. Y., Tieu, A.K., Liu, X.H. and Wang, G.D. Numerical modeling of the thermo deformation of the CVC roll for hot strip mills. Journal of Materials Processing Technology, 2002，130-131：219-223.

3.X M Zhang, Z Y Jiang, X H Liu, G D Wang. Modelling of the micro-segregation of twin-roll thin strip casting. Journal of Materials Processing Technology .2005, 162-163,591-595.

4.Xiaoming ZHANG, Zhenyi JIANG, Xianghua LIU and Guodong WANG.Simulation of the Fluid Flow, Heat Transfer and Micro-segregation in Twin-roll Strip Casting of Stainless Steel.Journal of MATERIALS SCIENCE and TECHNOLOGY, 2006，22(3): 295～300

5.X.M. Zhang, Z.Y. Jiang, L.M. Yang, X.H. Liu and G.D.Wang. Modelling of coupling flow and temperature fields in molten pool during twin-roll strip casting process. Journal of Materials Processing Technology, 2007, 187-188, 339-343.

6.Xiaoming Zhang, Zhengyi Jiang, Dongbin Wei, Xianghua Liu, Guodong Wang.Analysis of Casting Roll during Twin-Roll Thin Strip Casting. Steel research int.2010, 81(9):138-141.

7.Xiaoming Zhang, Zhengyi Jiang, Dongbin Wei, Xianghua Liu and Guodong Wang. Finite Element Modeling of Casting Roll during Twin-Roll Strip Casing [J].Advanced Materials Research, 2011,145:287-292.

8.Liang Bo, Wang Guodong, Zhang Baoyan, Zhang Xiaoming, Corrosion resistance of Al-Cu-Fe alloy powder coated with silica using an ultrasound-assisted sol-gel method, Corrosion science, 2013, 73, 292-299.

9.Bo Liang, Baoyan Zhang, Guodong Wang, Di Li, Xiaoming Zhang, Application of ultrasound irradiation on sol-gel technique for corrosion protection of Al65Cu20Fe15 alloy powder, Applied Surface Science, 2013, 285, 249-257.

10.Zhang Ting, Zhang Xiaoming, Wang Yuqian, Li Chenggang, Lan Liangyun, AlN Precipitates and Microstructure in Non-oriented Electrical Steels Produced by Twin-roll Casting Process, Acta Metallurgica Sinica-english Letters, 2013,26(4), 483-488.

11.Hejie Li, Zhengyi Jiang,Dongbin Wei,Xiaoming Zhang, Micro texture based analysis of surface asperity flattening behavior of annealed aluminum alloy in uniaxial planar compression. Tribology International, 2013, 66, 282-288.

12.X.J. Gao; Z.Y. Jiang; D.B. Wei; H.J. Li; S.H. Jiao;J. Xu; X.M. Zhang; J.T. Han; D.F Chen. Constitutive analysis for hot deformation behavior of novel bimetal consisting of pearlitic steel and low carbon steel. Materials Science and Engineering A, 2014,595, 1-9.

13.Xingjian Gao,Zhengyi Jiang,Dongbin Wei,Sihai Jiao,Dengfu Chen,Jianzhong Xu,Xiaoming Zhang,Dianyao Gong.Effects of temperature and strain rate on microstructure and mechanical properties of high chromium cast iron/low carbon steel bimetal prepared by hot diffusion-compression bonding. Materials and Design, 2014,63,650-657.

14.Guoqing Zu, Xiaoming Zhang, Jingwei Zhao, Yi Cui, Yuqian Wang, Zhengyi Jiang, Analysis of the microstructure, texture and magnetic properties of strip casting 4.5wt.% Si non-oriented electrical steel. Materials & Design. 2015, 85, 455-460.

15.Li, H.J., Jiang, Z.Y., Wei, D.B., Xu, J., Zhang, X., Gong, D. and Han, J. Study on surface asperity flattening in cold quasi-static uniaxial planar compression by crystal plasticity finite element method. Tribology Letters, 2015, 58(3), 1-10.

16.B. Liang, G. D. Wang, B. Y. Zhang and X. M. Zhang. Optimization of sol–gel coating on the surface of aluminum alloy powder for corrosion protection in the condition of ultrasonic radiation [J], materials and corrosion, 2015, 66(3),241-250.

17.Boostania, A.F., Yazdanib, S., Mousavianb, R.T., Tahamtanc, S., Khosroshahib, R.A., Wei, D.B., Brabazone, D., Xu, J., Zhang, X.M. and Jiang, Z.Y. Strengthening mechanisms of graphene sheets in aluminium matrix nanocomposites. Materials and Design , 2015, 88, 983-989.

18.Boostania, A.F., Mousavianb, R.T., Tahamtanc, S., Yazdanib, S., Khosroshahib, R.A., Wei, D.B., Xu, J., Zhang, X.M. and Jiang, Z.Y. Solvo thermal-assisted graphene encapsulation of SiC nanoparticles: A new horizon toward toughening aluminium matrix nanocomposites. Materials Science and Engineering A, 2016, 653, 99-107.

19.Guoqing Zu, XiaomingZhang, JingweiZhao, YuqianWang, YiCui, YiYan, Zhengyi Jiang .Analysis of {411}<148> recrystallization texture in twin-roll strip casting of 4.5wt%Si non-oriented electrical steel. Materials Letters, 2016,180 ,63–67.

20.Guoqing Zu, Xiaoming Zhang, Jingwei Zhao, Yuqian Wang, Yi Yan, Chengang Li,Guangming Cao, Zhengyi Jiang. Fabrication and properties of strip casting 4.5 wt% Si steel thin sheet. Journal of Magnetism and Magnetic Materials, 2017,424,64–68.

21.Wang, Yu-Qian ; Zhang, Xiao-Ming ; He, Zhen ; Zu, Guo-Qing ; Ji, Guang-Fa ; Duan, Jun-Yang ; Misra, R.D.K. Effect of copper precipitates on mechanical and magnetic properties of Cu-bearing non-oriented electrical steel processed by twin-roll strip casting Materials Science & Engineering A, 2017, 703, 340-347.

22.Wenzhen Xia , Jingwei Zhao , Hui Wu , Sihai Jiao , Xianming Zhao , Xiaoming Zhang , Jianzhong Xu , Zhengyi Jiang. Analysis of oil-in-water based nanolubricants with varying mass fractions of oil and TiO2 nanoparticles. Wear, 2018, 396-397, 162–171.

申請專利

1.一種高矽鋼薄帶及其製備方法，2012.7，中國，ZL201010297551.0

2.一種無取向矽鋼薄帶及其製備方法，2012.8，中國，ZL 201010510464.9

3.一種雙輥薄帶連鑄製備無取向矽鋼等軸晶薄帶坯的方法，2012.11，中國，ZL201010539378.0

4.含改性納米銅的冷軋薄板軋制乳化油及其製備方法 遼寧， CN201210306149.3

5.一種含有機硼酸酯的純水基冷軋薄板軋制液及其製備方法 遼寧， CN201210299683.6

6.一種基於薄帶連鑄製備高磁感高強度無取向矽鋼的方法 , 2016.3，中國，ZL201610178807.3

7.一種新能源汽車驅動電機用高強度無取向矽鋼的製造方法（CN201610884276.X）

8.一種基於納米Cu析出強化製備高強度無取向矽鋼的方法（CN201610883383.0）

出版專著

張曉明編著，實用連鑄連軋技術，化學工業出版社，2008

獲獎記錄

（1）“高精度軋制工藝技術研究”獲國家冶金局科技進步二等獎；

（2）“剛塑性有限元可壓縮法的若干理論問題”獲遼寧省科技進步三等獎；

（3）“高精度軋制工藝技術研究”獲遼寧省科技進步二等獎；

（4）“人工智慧及其在軋制中的套用” 獲遼寧省科技進步二等獎。