2003年7月畢業於吉林大學，獲學士學位，2008年6月于吉林大學獲材料學專業博士學位，目前於東南大學材料學院任教。
基本介紹
- 中文名：張友法
- 國籍：中國
- 民族：漢族
- 性別：男
人物經歷,研究方向,主要貢獻,獲獎記錄,
人物經歷
2003年7月畢業於吉林大學，獲學士學位。
2008年6月于吉林大學獲材料學專業博士學位。
目前於東南大學材料學院任教。
研究方向
金屬仿生微納米表面和石墨烯-金屬微納米摩擦學。
主要貢獻
致力於金屬表面仿生微納米結構設計、製備，從而實現潤濕性和光學特性的調控，旨在解決金屬表面露、霜、冰、光反射等技術難題；同時，開展宏量高性能石墨烯的新型製備技術研究，並在微納米尺度研究石墨烯-金屬複合表面的摩擦學特性，為微納米加工和MEMS/NEMS器件的減黏脫附提供新思路。主持了包括國家自然科學基金、教育部博士點基金、江蘇省自然科學基金和國家重大科技專項子課題等多項項目，還作為主要參加人承擔了國防重大科技專項、國家自然科學基金和江蘇省工業支撐、江蘇省重大科技成果轉化項目等縱向項目10餘項。已發表論文30多篇，其中SCI或EI收錄26篇。已申請專利13件，其中發明專利11件。
Facile fabrication of superhydrophobic nanostructures on aluminum foils with controlled-condensation and delayed-icing effects.
Youfa Zhang, Xinquan Yu, Hao Wu, Jie Wu.
Applied Surface Science, 2012, in press.
Microscopic observations of the lotus leaf for explaining the outstanding mechanical properties.
Youfa Zhang, Hao Wu, Xinquan Yu, Feng Chen, Jie Wu.
Journal of Bionic Engineering, 2012, 9(1): 84-90.
Low-cost one-step fabrication of superhydrophobic surface on Al alloy.
Youfa Zhang, Jie Wu, Xinquan Yu, Hao Wu.
Applied Surface Science, 2011, 257: 7928-7931.
Microstructure characteristics and solidification behavior of thixomolded Mg-9 Pct Al-1 Pct Zn alloy
Y. F. Zhang, Y. B. Liu, Z. Y. Cao.
Transactions of Nonferrous Metals Society of China, 2011, 21(2): 250-256.
Fabrication and anti-icing performance of a superhydrophobic copper surface with low adhesion
Y. F. Zhang, X. Q. Yu, Q. H. Zhou, K. N. Li.
Acta Phys. -Chim. Sin., 2010, 26(5): 1457-1462.
Fabrication of superhydrophobic surface on aluminum alloy by sandblasting-anodizing-fluorination
Q. H. Zhou, X. Q. Yu, Y. F. Zhang, K. N. Li, F. Chen, Z. Z. Gu.
Chemical Journal of Chinese Universities, 2010, 31(3): 456-462
Fabrication of superhydrophobic copper surface with ultra-low water roll angle.
Y. F. Zhang, X. Q. Yu, F. Chen, Q. H. Zhou, K. N. Li.
Applied Surface Science, 2010, 256: 1883-1887.
Microstructure transformation of deformed AZ91D during isothermal holding.
Y. F. Zhang, Y. B. Liu, Z. Y. Cao, L. Zhang.
Transactions of Nonferrous Metals Society of China, 2010, 20: 14-21.
Effects of isothermal process parameters on the microstructure of semisolid AZ91D alloy produced by SIMA.
L. Zhang, Y. B. Liu, Z. Y. Cao, Y. F. Zhang, Q. Q. Zhang.
Journal of Materials Processing Technology, 2009, 209(2): 792-797.
Mechanical properties of thixomolded AZ91D magnesium alloy.
Youfa Zhang, Yongbing Liu, Zhanyi Cao, Q. Q. Zhang, L. Zhang.
Journal of Materials Processing Technology, 2009, 29: 1375-1384.
Study on the microstructure evolution and rheological parameter of semisolid Mg–10Al–4Zn alloys.
Q. Q. Zhang, Z. Y. Cao, Y. B. Liu, J. H. Wu, Y. F. Zhang.
Materials Science and Engineering A, 2008, 478: 195-200.
Effect of asymmetrical deformation on the microstructure evolution of semisolid AZ91D alloy.
Q. Q. Zhang, Z. Y. Cao, Y. B. Liu, Y. F. Zhang, L. Zhang, Milin Zhang, Ruizhi Wu.
Materials Science and Engineering A, 2008, 488(1-2): 260-265.
Effect of compression ratio on the microstructure evolution of semisolid AZ91D alloy.
Q. Q. Zhang, Z. Y. Cao, Y. F. Zhang, G. H. Su, Y. B. Liu.
Journal of Materials Processing Technology, 2007, 184(1-3): 195-200.
Microstructural evolution of thixomolded AZ91D magnesium alloy with process parameters variation.
Y. F. Zhang, Y. B. Liu, Q. Q. Zhang, Z. Y. Cao, X. P. Cui, Y. Wang.
Materials Science and Engineering A, 2007, 444: 251-256.
Filling analysis for Thixomolded process of AZ91D magnesium alloy.
Y. F. Zhang, Y. B. Liu, X. P. Cui, Z. Y. Cao.
Transactions of Nonferrous Metals Society of China, 2006, 16: s117-s121.
獲獎記錄
2011.3，東南大學第十八屆青年教師授課競賽提名獎。
2011.9，東南大學教學工作優秀二等獎。
2012.5，常州市人民政府獎教金。
