基本介紹
- 中文名：康鵬超
- 學位/學歷：博士
- 職業：教師
- 專業方向：耐燒燒蝕複合材料的設計及性能
- 任職院校：哈爾濱工業大學
人物經歷,研究方向,學術成果,榮譽稱號,
人物經歷
工作經歷
1990.7-1997.10 東北重型機械學院
1997.10-2004.12 燕山大學
2005.1- 哈爾濱工業大學
教育經歷
1986年-1990年, 就讀於東北重型機械學院,獲學士學位
1990年-1993年, 就讀於東北重型機械學院,獲碩士學位
2000年-2004年, 就讀於哈爾濱工業大學 ,獲博士學位
研究方向
耐燒燒蝕複合材料的設計及性能
複合材料的界面設計及控制
學術成果
論文期刊
1.Pengchao Kang, Zhongda Yin，Celestine Okoye. Effect of milling time on phase transition and grain growth during the annealing process of MA powders .Materials Science & Engineering A . Vol 395/1-2 ,2005, 167-172
2. Pengchao Kang, Zhongda Yin, Yue Jiang, Mingwei Li, “Formation mechanism of Ti5Si3 powder by mechanical alloying” J. University of Sci. Tech Beijing. 11(2), 2004, 117-119
3. PengChao Kang, ZhongDa Yin. “Formation Mechanism and Nanocrystalline Phase Transformation of Molybdenum Disilicide by Mechanical Alloying” Nanotechnology 15（7）, 2004, 851－855
4. Pengchao Kang, Zhongda Yin “Phase formation during annealing as-milled powders of molybdenum disilicide” Mater. Lett. 57 (2003), 4412-4417
5. 康鵬超，尹鐘大，李明偉，姜越, 機械合金化反應燒結製備SiC/MoSi2複合材料 稀有金屬材料與工程 Vol.34(12), 2005, 1974-1977
6. Pengchao Kang, Gaohui Wu, Zhongda Yin. Influence of Nowonty phase on the fracture toughness of SiC/MoSi2 composites. Key Engineering Materials, 2007 v 353-358: 1326-1329 EI
7. Kang Pengchao, Wu Gaohui, Cao Zhongwen, Zhang Jihong, Wei Dejun, Lin Leiting. Reactive Hot-press Sintering of Al-B4C Composites at Relative Low Temperature. Journal of Wuhan University of Technolotgy-Mater. Sci. Ed. Jun. 2009.72-74
8. P.C. Kang, Z.W. Cao, G.H. Wu, J.H. Zhang, D.J. Wei, L.T. Lin. Phase identification of Al–B4C ceramic composites synthesized by reaction hot-press sintering. Int. Journal of Refractory Metals & Hard Materials 2010; 28: 297–300
9. Pengchao Kang, Guoqin Chen and Gaohui Wu. Synthesis Nano-SiCp/MoSi2 Composites by in-situ Reaction Sintering and Low Temperature Oxidation Behavior. Advanced Materials Research Vols. 105-106 (2010) pp 150-153
10. Pengchao Kang, Bin Zhang, Guoqin Chen, Gaohui Wu. Synthesis of nanostructured SiC coatings on carbon fibres by in situ reaction sintering with milled powders. Surface & Coatings Technology. 205 (2010) 294–298.
11. Pengchao Kang, Bin Zhang, Gaohui Wu, Jun Su, Huasong Gou. Synthesis of SiO2 covered SiC nanowires with milled Si,C nanopowders. Materials Letters 65 (2011) 3461–3464
12. P.C. Kang, G.Q. Chen, B. Zhang, G.H. Wu, S. Mula, C.C. Koch. Oxidation protection of carbon fibers by a reaction sintered nanostructured SiC coating. Surface & Coatings Technology. 206 (2011) 305-311.
13. Z. Wu , P. C. Kang, G. H. Wu,Q. Guo, Z. Y. Xiu. Effect of heating process on fracture behaviors of Wf/Cu82Al10Fe4Ni4 composites. J Mater Sci (2011) 46:5541–5545.
14. Z. Wu, G.H. Wu, P.C. Kang, Q. Gou, G.Q. Chen, L.T. Jiang. High temperature fracture behavior of tungsten fiber reinforced copper matrix composites under dynamic compression. Materials and Design 32 (2011) 5022–5026.
15. Zhe Wu, Pengchao Kang, Gaohui Wu, Qiang Guo, LongTao Jiang. The effect of interface modification on fracture behavior of tungsten fiber reinforced copper matrix composites. Materials Science and Engineering A.2012,536(2):45-48
16. Suhrit Mula, H. Bahmanpour, S. Mal, P.C. Kang, M. Atwater,W. Jian, R.O. Scattergood, Carl C. Koch. Thermodynamic feasibility of solid solubility extension of Nb in Cu and their thermal stability. Materials Science and Engineering A 539 (2012) 330–336.
Li Bing-qing, KangPeng-chao,GouHua-song,ZhangQiang,WuGao-hui. Ablation mechanisms of interpenetrating Al20Si/graphite composites. Ceramics International 39 (2013)
Suhrit Mula, J. Panigrahi, P.C. kang, Carl C. Koch. Effect of microwave sintering over vacuum and conventional sintering of Cu based nanocomposites. Journal of Alloys and Compounds 588 (2014) 710–715
Pengchao Kang, Bin Zhang, Gaohui Wu, Huasong Gou, Guoqin Chen, Longtao Jiang, Suhrit Mula. Synthesis of b-SiC nanowires by ball milled nanoparticles of silicon and carbon. Journal of Alloys and Compounds 604 (2014) 304–308
Bingqing Li , Pengchao Kang, Huasong Gou, Gaohui Wu, Suhrit Mula. Surface morphology evolution and ablation mechanism of SiC–Si multiphase ceramic coating on graphite under oxy-acetylene flame. Corrosion Science 88
榮譽稱號
2007年 被評為哈爾濱工業大學優秀專兼職學生工作者
