崔俊佳

崔俊佳，男，1983年2月生，工學博士，湖南大學機械與運載工程學院副教授、博士生導師。

基本介紹

• 中文名：崔俊佳
• 畢業院校：哈爾濱工業大學
• 學位/學歷：博士
• 專業方向：機械與運載工程
• 任職院校：湖南大學

人物經歷

教育經歷

2002/09-2006/06，哈爾濱工業大學，材料成型及控制工程專業，學士。

2006/09-2008/06，哈爾濱工業大學，材料加工工程專業，碩士。

2008/09-2012/06，哈爾濱工業大學，材料加工工程專業，博士。

工作經歷

2013/05-2017/01，湖南大學機械與運載工程學院（助理教授、碩士生導師）

2017/01-至今，湖南大學機械與運載工程學院（副教授、博士生導師）

學術兼職

[1] 《材料科學》期刊編委

[2] 《American Journal of Mechanical and Materials Engineering》期刊編委

[3] Materials and Design 審稿人

[4] Materials Science and Engineering: A審稿人

[5] International of Material Forming審稿人

[6] Journal of Manufacturing Processes審稿人

[7] Scientia Iranica Journal審稿人

[8] Materials Chemistry and Physics審稿人

[9] Thin-Walled Structures審稿人

[10] ASME Journal of Manufacturing Science and Engineering審稿人

[11] 《中國機械工程》審稿人

[12] 《塑性工程學報》審稿人

[13] 廣汽研究院異種材料焊接技術培訓專家

[14] 廣汽菲亞特汽車技術資格評審專家

研究領域

汽車車身輕量化設計、汽車車身輕量化製造、先進板材成形技術、異種材料焊接技術。

科研項目

（1）主持科研項目

[1] 國家自然科學基金 高強鋼板熱衝壓三維成形極限圖的構建理論與套用研究 主持

[2] 湖南省自然科學基金 高強鋼板熱變形行為研究及失效準則的建立 主持

[3] 上汽通用五菱汽車股份有限公司 車身輕量化粘接工藝套用研究 主持

[4] 國家重點研發計畫“新能源”汽車專項 輕量化純電動轎車集成開發技術 子課題負責人

[5] 湖南省重點研發計畫 複雜形狀鋁合金車身件複合成形關鍵技術研究 子課題負責人

[6] 湖南大學青年教師成長計畫項目 主持

[7] 汽車車身先進設計製造國家重點實驗室人才培育計畫 主持

[8] 汽車零部件先進制造技術教育部重點實驗室開放基金 主持

[9] 先進焊接與連線國家重點實驗室開放基金 主持

[10] 材料成形與模具技術國家重點實驗室開放基金 主持

[11] 凝固技術國家重點實驗室開放基金 主持

[12] 汽車用鋼安全碰撞性能檢測分析 主持

[13] 膠粘劑在輕量化車身上的測試套用 主持

[14] 汽車用鋼產品認證高速拉伸測試服務 主持

學術成果

期刊論文

[1] Junjia Cui, Guangyong Sun, Guangyao Li, ZhidanXu, Paul Chu. Specific wave interface and its formation mechanism in magnetic pulse welding. Applied Physics Letters, 2014, 105 (22): 221901.

[2] Hao Jiang, Tong Luo, Guangyao Li, Xu Zhang, Junjia Cui*. Fatigue life assessment of electromagnetic riveted carbon fiber reinforce plastic/aluminum alloy lap joints using Weibull distribution. International Journal of Fatigue, 2017, 105: 180-189.

[3] Hao Jiang, Guangyao Li, Xu Zhang, Junjia Cui*. Fatigue and failure mechanism in carbon fiber reinforced plastics/aluminum alloy single lap joint produced by electromagnetic riveting technique. Composites Science and Technology, 2017, 152: 1-10.

[4] Guangyong Sun, Huile Zhang, Guoxing Lu, Jianwen Guo, Junjia Cui*, Qing Li. An Experimental and Numerical Study on Quasi-Static and Dynamic Crashworthiness for Tailor Rolled Blank (TRB) Structures. Materials & Design, 2017, 118: 175-197.

[5] Gong zhihui, Zhan zhaobin, Zhang Xu, Sun guangyong, Zheng Gang, Cui junjia*. Research on the whole tool mesh reconstruction in the process of springback compensation for auto-body panels. International Journal of Material Forming, 2018, 11: 77-85.

[6] Guangyao Li, Hao Jiang, Xu Zhang, Junjia Cui*. Mechanical properties and fatigue behavior of electromagnetic riveted lap joints influenced by shear loading. Journal of Manufacturing Processes, 2017, 26: 226-239.

[7] Guangyao Li, Huakun Deng, Yunfei Mao, Xu Zhang, Junjia Cui*. Study on AA5182 aluminum sheet formability using combined quasi-static-dynamic tensile processes. Journal of Materials Processing Technology, 2018, 255: 373-386.

[8] Junjia Cui, Lin Qi, Hao Jiang, Guangyao Li, Xu Zhang. Numerical and experimental investigations in electromagnetic riveting with different rivet dies. International Journal of Material Forming. 2017. Doi:10.1007/s12289-017-1394-z.

[9] Junjia Cui, Dongying Dong, Xu Zhang, Xiaodong Huang, Guoxing Lu, Hao Jiang, Guangyao Li. Influence of thickness of composite layers on failure behaviors of Carbon Fiber Reinforced Plastics/Aluminum alloy electromagnetic riveted lap joints under high-speed loading. International Journal of Impact Engineering, 2018, 115: 1-9.

[10] HuihuiGeng, ZehuaXia, XuZhang, GuangyaoLi, JunjiaCui*. Microstructures and mechanical properties of the welded AA5182/HC340LA joint by magnetic pulse welding. Materials Characterization, 2018, 138: 229-237.

[11] Junjia Cui, Hao Jiang, Huihui Geng, Quanxiaoxiao Liu, and Guangyao Li*. Research on magnetic pulse technology for joining dissimilar materials in lightweight automobile bodies in Reimagining new energy vehicles: Research innovations at Tongji University. (Science/AAAS, Washington, DC, 2017), p. 21-22.

[12] Jiang Hao, Cong Yanjun, Zhang Xu, Li Guangyao, Cui Junjia*. Fatigue degradation after salt spray ageing of electromagnetically riveted joints for CFRP/Al hybrid structure, Materials & Design. 2018, 142: 297-307.

[13] Ou Hang, Zhang Xu, Xu junrui, Li guangyao, Cui junjia. Mechanical Properties and Microstructure of High Strength Steel Controlled by Hot Stamping Process. Journal of Materials Engineering and Performance. 2018, Accept. DOI: 10.1007/s11665-018-3290-1

[14] Junjia Cui, Guangyong Sun, Junrui Xu, Zhidan Xu, Xiaodong Huang, Guangyao Li. A Study on the Critical Wall Thickness of the Inner Tube for Magnetic Pulse Welding of Tubular Al-Fe Parts. Journal of Materials Processing Technology, 2016, 227: 138-146.

[15] Junjia Cui, Guangyong Sun, Junrui Xu, Xiaodong Huang, Guangyao Li. A method to evaluate the formability of high-strength steel in hot stamping. Materials & design, 2015, 77: 95-109.

[16] Junjia Cui, Chengxi Lei, Zhongwen Xing, Chunfeng Li. Microstructure Distribution and Mechanical Properties Prediction of Boron Alloy during Hot Forming Using FE Simulation. Materials Science and Engineering A, 2012, 535: 241-251.

[17] Junjia Cui, Chengxi Lei, Zhongwen Xing, Chunfeng Li. Predictions of the Mechanical Properties and Microstructure Evolution of High Strength Steel in Hot Stamping. Journal of Materials Engineering and Performance, 2012, 21: 2244-2254.

[18] Junjia Cui, Chengxi Lei, Zhongwen Xing, Chunfeng Li. Analysis of Phase Transformation Simulation and Prediction of Phase Distribution in High Strength Steel in Hot Stamping. Journal of Computational and Theoretical Nano science, 2012, 9(9): 1309-1314.

[19] 許冰，歐航，柳泉瀟瀟，徐志丹，李光耀，崔俊佳*. 鋁合金-高強鋼磁脈衝焊接接頭鹽霧腐蝕性能研究. 中國機械工程, 2018, Accept.

[20] 崔俊佳，袁偉，李光耀. 汽車車身異種金屬板件磁脈衝焊接工藝研究. 汽車工程, 2017，39(1): 113-120.

[21] 崔俊佳，胡明，李光耀. 汽車零部件熱成形極限裕度雲圖的構建與套用研究. 中國機械工程, 2017, 28(03): 358-365.

[22] 李光耀，陳乾，蔣浩，張旭，崔俊佳*. 卡車車架磁脈衝鉚接結構可行性研究. 塑性工程學報, 2017, 24 (3): 1-6.

[23] 單業奇, 崔俊佳*, 王濤, 龐通. 磁脈衝脹形管件材料本構參數識別方法研究. 鍛壓技術, 2016, 41(9):71-79

[24] 崔俊佳, 邢忠文, 李春峰, 徐偉力. 高強度鋼板熱衝壓數值模擬研究. 材料科學與工藝, 2010, 18 (Sup.1): 224-228.

[25] 崔俊佳, 孫立強, 孟令博, 章茂雲. 碳纖維連線結構鈦合金鉚釘電磁鉚接試驗研究. 鍛壓技術, 2013, 38(2): 47-52.

[26] 崔俊佳, 于海平, 李春峰, 雷呈喜, 邢忠文. 高強鋼板熱衝壓工藝中的相變模擬. 塑性工程學報, 2013, 20(1): 50-54.

[27] ZhidanXu, Junjia Cui*, Haiping Yu, Chunfeng Li. Research on the Impact Velocity of Magnetic Impulse Welding of Pipe Fitting. Materials & Design, 2013, 49: 736-745.

[28] Junrui Xu, Junjia Cui*, Qiquan Lin, Chunfeng Li. Effects of driver sheet on magnetic pulse forming of AZ31magnesium alloy sheets. The International Journal of Advanced Manufacturing Technology, 2014, 72: 791-800.

[29] Junrui Xu, Junjia Cui*, Qiquan Lin, Yanrong Li, Chun Feng Li. Magnetic pulse forming of AZ31 magnesium alloy shell by uniform pressure coil at room temperature. The International Journal of Advanced Manufacturing Technology, 2014, 77: 289-304.

[30] Zhang Xu, Cui junjia, Xu junrui, Li Guangyao. Microstructure investigations on 2A10 aluminum alloy bars subjected to electromagnetic impact upsetting, Materials Science and Engineering: A, 2017, 702: 142-152.

[31] 李光耀，陳侶侶，崔俊佳*. 5182鋁合金/HC340LA高強鋼異種金屬件磁脈衝焊接數值模擬與試驗驗證. 塑性工程學報. Accept.

[32] 陳碩琛，李光耀，崔俊佳*. 表面處理對汽車車身用5182鋁合金膠粘接頭性能的影響。汽車工程. Accept.

[33] Zhang Xu, Cui Junjia, Li Guangyao. Microstructural mechanism in adiabatic shear bands of Al-Cu alloy bars using electromagnetic impact upsetting. Materials Letters, 2017, 194, 62-65.

[33] Hongsheng Liu, Junjia Cui, Kaiyong Jiang, and Guangtao Zhou. Cracking Prediction in Hot Stamping of High-Strength Steel by a Temperature-Dependent Forming Limit Surface Approach. Journal of Materials Engineering and Performance, 2016, 25(11): 4894-4901.

[34] Junrui Xu, Junjia Cui, Qiquan Lin, Yanrong Li , Chun Feng Li. Experimental and numerical research on formability of magnetic pulse plain strain of AZ31 magnesium alloy sheets. International Journal of Precision Engineering and Manufacturing, 2015, 16, 1779-1788.

[35] J Xu, Y Zhou, J Cui, G Sun, G Li. Experimental study for rubber pad forming process of AZ31 magnesium alloy sheets at warm temperature. The International Journal of Advanced Manufacturing Technology, 2017, 89(1-4): 1079-1087.

[36] Junrui Xu, Jiai Su, Yanrong Li, Junjia Cui*, Qiquan Lin, Guangyong sun*, Guangyao Li. Thermal effects in magnetic pulse forming of magnesium alloy sheet. The International Journal of Advanced Manufacturing Technology, 2015, 81(5-8): 755-770.

[37] Junrui Xu, Qiquan Lin, Junjia Cui*, Chunfeng Li, Formability of magnetic pulse uniaxial tension of AZ31magnesium alloy sheet. The International Journal of Advanced Manufacturing Technology, 2014, 72: 665-676.

[38] Chengxi Lei, Junjia Cui, Zhongwen Xing, Hongya Fu, Hao Zhao. Investigation of Cooling Effect of Hot-Stamping Dies by Numerical Simulation. Physics Procedia, 2012, 25:118-124.

[39] Chengxi Lei, Junjia Cui, Zhongwen Xing, Hongya Fu. Research on Hot Stamping of Square Cup for Advanced High Strength Steel by Numerical Simulation. Journal of Computational and Theoretical Nanoscience, 2012, 9(9): 1165-1170.

[40] 雷呈喜, 崔俊佳, 邢忠文, 趙浩. 高強鋼盒形件熱衝壓成形組織預測. 塑性工程學報, 2012, 19(6): 40-44.

[41] Junrui Xu, Haiping Yu, Junjia Cui, Chunfeng Li. Formability of AZ31 magnesium alloy sheets in magnetic pulse bulging. Materials Science and Engineering A, 2013, 569: 150-158.

[42] 章茂雲, 于海平, 孫立強, 崔俊佳, 李春峰. 8mm 2A10鋁合金鉚釘電磁鉚接工藝試驗研究.航天製造技術, 2012, 3: 7-10.

[43] 黃宗斌, 韋超忠, 徐志丹, 崔俊佳, 李光耀, 張旭. Φ6 mm-Q235鋼鉚釘電磁鉚接工藝試驗. 精密成形工程, 2017, 9(1): 76-80.

[44] 李光耀, 馮雪瑞, 蔣浩, 崔俊佳, 張旭. 碳纖維-鋁合金電磁鉚接與準靜態對比研究. 鍛壓技術, 2017, 42 (4): 86-90.

[45] Libin Duan, Guangyong Sun, Junjia Cui, Aiguo Cheng, Tao Chen, Guangyao Li. Crashworthiness design of vehicle structure with tailor rolled blank. Structural and Multidisciplinary Optimization, 2016, 53: 321-338.

[46] Junjia Cui, Chengxi Lei, Zhongwen Xing, Hao Zhao, Shumei Ma. The Use of Advanced High Strength Steel based on Hot Stamping Process in Vehicle Manufacturing Technologies. Proceedings of 2012 International Conference on Advanced Vehicle Technologies and Integration, 2012, 548-552.

[47] Xiaohui Zhang, Junjia Cui*, Chengxi Lei, Zhongwen Xing. Structural Finite Element Analysis of The Fixed Stiffness Testing Instrument. Applied Mechanics and Materials, 2011, 94-96: 2102-2106.

[48] Zhongwen Xing, Junjia Cui, Hongsheng Liu, Chunfeng Li. Numerical and Experimental Investigation into Hot Stamping of High Strength Steel Sheet for Auto B Pillar Reinforced Panel. Advanced Materials Research, 2010, (129-131): 322-327.

[49] Chengxi Lei, Junjia Cui, Zhongwen Xing, Hongsheng Liu. Research of Shot Peening Effect of Hot-Stamping Square-cup Parts of Advanced High Strength Steel for Automobile. Proceedings of 2012 International Conference on Advanced Vehicle Technologies and Integration, 2012, 536-510.

[50] Lei Chengxi, Cui junjia, Xing Zhongwen, Zhao hao. Research on Flow Behavior of Advanced High Strength Steel at Elevated Temperature. Material Science Forum, 2013, 749: 498-503.

[51] Xu zhidan, Cui junjia, Yu haiping, Li chunfeng. Constitutive Relationship of 3A21 Aluminium Alloy Tube for Magnetic Pulse Forming. Applied Mechanics and Materials, 2013, 239-240: 314-319.

[52] Xiaohui Zhang, Chengxi Lei, Junjia Cui, Zhongwen Xing. Design and Research of Stiffness Instrument for Automotive Panel. Applied Mechanics and Materials, 2011, 97-98: 694-697.

[53] Libin Duan, Guangyong Sun, Junjia Cui, Tao Chen, Guangyao Li. Lightweight design of vehicle structure with tailor rolled blank under crashworthiness. 11th World Congress on Structural and Multidisciplinary Optimisation, 2015, Sydney Australia.

[54] Huihui Geng, Junjia Cui, Guangyong Sun, Guangyao Li. A Study on the Critical Thickness of the Inner Tube for Magnetic Pulse Welding Using FEM and BEM. Proceedings of 7th International Conference on High Speed Forming, 2016, Dortmund, Germany.

[55] 鄧將華, 李春峰, 于海平, 崔俊佳. 磁脈衝鉚接鉚模形式對鉚釘變形的影響. 第十屆全國塑性工程學術年會論文集, 2007: 647-651.

[56] 劉紅生, 江開勇, 崔俊佳, 周廣濤, 劉華, 王霏, 鄭清娟. 一種預測板材成形回彈的新的自適應無格線法. 計算機集成製造系統, 2017.

發明專利

[1] 崔俊佳，李光耀，谷永強，李佳盈. 玄武岩纖維增強泡沫基複合保溫層及其製造方法。2016107166365

[2] 崔俊佳，李光耀，孫光永，夏澤華. 一種無鉚釘鉚接柔性化模具集成裝置。2016107821198

[3] 崔俊佳，李光耀，孫光永，歐航. 試驗方法及基於該方法的熱成形起皺極限面的建立方法。2016105286593

[4] 崔俊佳，孫光永，李光耀，胡明. 一種汽車零部件熱衝壓破裂性能的評價方法。106018129A

[5] 崔俊佳，李光耀，孫光永. 一種手持式電磁鉚槍的減震隔振系統。201510004467.8

[6] 崔俊佳，李光耀，孫光永. 一種提高金屬管件的成形極限的裝置。201510002746.0

[7] 崔俊佳，孫光永，李光耀. 一種基於電磁成形技術的複合波紋管及其成形裝置。201410128175.0

[8] 崔俊佳，孫光永，李光耀. 一種基於電液成形的層合板的成形裝置和方法。201410128254.1

[9] 崔俊佳，孫光永，李光耀. 一種高強鋼板熱成形極限圖的建立方法。201410076641.5

[10] 崔俊佳，孫光永，李光耀，袁偉. 一種電磁脈衝徑向粉末壓實裝置和壓實方法。201510765387.4

[11] 崔俊佳，柳泉瀟瀟，李光耀，孫光永. 一種用於磁脈衝焊接的圓管對心柔性夾具。105710591A

[12] 崔俊佳，鄧樺坤，李光耀，孫光永. 一種金屬板材高速成形極限實驗裝置。201610201325.5

[13] 崔俊佳，齊麟，李光耀，孫光永. 一種無頭鉚釘雙側載入磁脈衝鉚接裝置。201610527190.1

[14] 崔俊佳，李光耀，孫光永，鄧樺坤，胡明. 一種金屬板材高速成形極限圖的建立方法。201610204073.1

[15] 李光耀，崔俊佳，陳乾，蔣浩. 一種卡車車架磁脈衝鉚接裝置。2016108867555

[16] 李光耀，崔俊佳，耿輝輝，孫光永. 一種測量複雜應變路徑下薄板成形極限的試驗裝置及方法。2016105273771