宋波，男，山西大同人，中共黨員，西南大學材料與能源學部副教授。
基本介紹
- 中文名：宋波
- 出生地：山西大同
- 職業：西南大學材料與能源學部副教授
教育背景,工作經歷,教學成果,研究方向,科研成果,專利,
教育背景
2010/03 - 2013/06，重慶大學，材料科學與工程，博士
2007/09 - 2009/12，重慶大學，材料科學與工程，碩士
2003/09 - 2007/06，中北大學，無機非金屬材料，學士
工作經歷
2018/07-至今，西南大學，材料與能源學部，副教授
2013/07 - 2018/06，西南大學，材料與能源學部，講師
教學成果
入職以來發表教改論文1篇，指導本科生髮表CSCD學術論文1篇，指導本科生申請並立項國家大學生創新基金1項。
本科生課程：《材料力學性能》、《粉末冶金原理》、《材料物理性能》
研究生課程：《材料成型與控制》
研究方向
金屬材料的微觀結構表征及組織性能控制；鎂合金塑性變形、強韌化機理及衝壓成形性能；基於梯度應變的微觀組織調控及變形機理研究；基於低成本、短流程、高性能金屬型材的新型加工技術開發等。
科研成果
參與兩項科技部“973”項目及多項國家自然科學基金的研究工作。主持包括省部級基金、重點實驗室開放基金、中央高校和研究生創新基金等多項科研項目。已在Scr Mater, Mater Sci Eng A, Mater Des, J Alloy Compd, Mater Charact, Acta Metall Sin.等國內外知名期刊上發表學術論文30餘篇, 被引用300餘次。
[1] B. Song, N. Guo, R. Xin, H. Pan, C. Guo. Strengthening and toughening of extruded magnesium alloy rods by combining pre-torsion deformation with subsequent annealing. Materials Science and Engineering A. 2015, doi:10.1016/j.msea.2015.10.069.(SCI)
[2] N. Guo*, B. Song*, H. Yu, R. Xin, B. Wang, T. Liu. Enhancing tensile strength of Cu by introducing gradient microstructures via a simple torsion deformation. Materials and Design. 2015, (SCI)
[3] N. Guo, B. Song*, C. Guo, R. Xin*, Q. Liu. Improving tensile and compressive properties of magnesium alloy rods via a simple pre-torsion deformation. Materials and Design. 2015, 83: 270-275.(SCI)
[4] B. Song, R. Xin, N. Guo, J. Xu, L. Sun, Q. Liu.Dependence of tensile and compressive deformation behavior on aging precipitation in rolled ZK60 alloys. Materials Science and Engineering A. 2015, 639: 724-731.(SCI)
[5] B. Song, R. Xin, A. Liao, W. Yu, Q. Liu. Enhancing stretch formability of rolled Mg sheets by pre-inducing contraction twins and recrystallization annealing. Materials Science and Engineering A. 2015, 627: 369-373. (SCI)
[6] B. Song, R. Xin, X. Zeng, G. Chen and Q. Liu. Activation of multiple twins by pre-tension and compression to enhance the strength of Mg-3Al-1Zn alloy plates. Materials Science and Engineering A. 2015, 621: 100–104. (SCI)
[7] N. Guo, B. Song, B. Wang, Q. Liu. Influence of torsion deformation on textures of cold drawing pearlitic steel wires. Acta Metallurgica Sinica (English Letters). 2015, 50: 285-292. (SCI)
[8] C. Guo, R. Xin, J. Xu, B. Song, Q. Liu. Strain compatibility effect on the variant selection of connected twins in magnesium. Materials & Design, 2015, 76: 71-76.(SCI)
[9] Q. Yang, B. Jiang, W. Jiang, B. Song, S. Luo and F. Pan. Microstructural Evolution and Mechanical Behavior of AZ31 Magnesium Alloy Sheets with Li Addition. Materials Science Forum. 2015, 816: 399-403.(Inter. Conf. Article) (EI)
[10] H. Pan, G. Qin, M. Xu, H. Fu, Y. Ren, F. Pan, Z. Gao, C. Zhao, Q. Yang, J. She, B. Song. Enhancing mechanical properties of Mg–Sn alloys by combining addition of Ca and Zn. Materials & Design, 2015, 83: 736–744. (SCI)
[11] B. Song, R. Xin, Y. Liang, G. Chen and Q. Liu.Twinning characteristic and variant selection in compression of a pre-side-rolled Mg alloy sheet. Materials Science and Engineering A. 2014, 614 (22): 106–115. (SCI)
[12] B. Song*, N. Guo, T. Liu and Q. Yang.Improvement of formability and mechanical properties of magnesium alloys via pre-twinning: A review. Materials and Design. 2014, 62: 352–360. (Review Article) (SCI)
[13] 宋波, 辛仁龍, 孫立雲, 陳剛, 劉慶. 鎂合金拉伸壓縮不對稱性的影響因素及控制方法. 中國有色金屬學報. 2014, 24(8): 1941-1952. (Review Article) (EI)
[14] 宋波*, 辛仁龍, 郭寧, 劉婷婷, 楊青山. 變形鎂合金室溫應變硬化行為的研究進展. 中國有色金屬學報. 2014, 24(11): 2699-2710. (Review Article) (EI)
[15] B. Song, R. Xin, G. Chen, K. Zeng, G. Huang, Qing Liu. Influence of various precipitate phases on tensile properties of an extruded Mg-Y-Nd alloy. Materials Science Forum. 2014, 788: 17-22. (Inter. Conf. Article)(EI)
[16] N. Guo, B. Song, B. Luan, Z. Chen, Q. Liu. Deformation bands in fully pearlitic steel during wire drawing. Science China Technological Sciences. 2014, 57: 796-803. (SCI)
[17] Q. Yang, B. Jiang, J. He, B. Song, W. Liu, H. Dong, F. Pan. Tailoring texture and refining grain of magnesium alloy by differential speed extrusion process. Materials Science and Engineering A. 2014. 612(26): 187-191.(SCI)
[18] C. Guo, R. Xin, C. Ding, B. Song, Q. Liu. Understanding of variant selection and twin patterns in compressed Mg alloy sheets via combined analysis of Schmid factor and strain compatibility factor. Materials Science and Engineering A. 2014, 609: 92-101. (SCI)
[19] Q. Yang, B. Jiang, H. Pan, B. Song, Z. Jiang, J. Dai, L. Wang, F. Pan. Influence of different extrusion processes on mechanical properties of magnesium alloy. Journal of Magnesium and Alloys. 2014, 2(3): 220-224.
[20] B. Song, R. Xin, L. Sun, G. Chen and Q. Liu. Enhancing the strength of rolled ZK60 alloys via the combined use of twinning deformation and aging treatment. Materials Science and Engineering A. 2013. 582: 68-75. (SCI)
[21] 宋波, 辛仁龍, 陳剛, 孫立雲, 劉慶. 熱軋及熱處理對Mg-Y-Nd合金組織的影響. 中國有色金屬學報. 2013, 23(10): 2721-2729. (EI)
[22] B. Song, R. Xin, G. Chen, X. Zhang and Q. Liu.Improving tensile and compressive properties of magnesium alloy plates by pre- cold rolling. Scripta Materialia. 2012, 66: 1061-1064.(SCI)
[23] B. Song, R. Xin, G. Chen, X. Zhang and Q. Liu. Mechanical properties and anisotropy of Mg alloys with twin lamellae. 33rd Risoe International Symposium on Materials Science. 2012: 337-347. (Inter. Conf. Article)
[24] 宋波, 辛仁龍, 劉慶. 析出相對鎂合金變形機理影響的研究進展. 中國有色金屬學報. 2011, 11: 2019-2731. (Review Article)(EI)
[25] H. Zhang, G. Huang, B. Song, L. Zhang and D. Kong.Influence of microstructure and texture on formability of AZ31B magnesium alloy sheets. Transactions of Nonferrous Metals Society of China. 2011, 21(4): 844-850. (SCI)
[26] R. Xin, L. Li, K. Zeng, B. Song, Q. Liu.Structural examination of aging precipitation in a Mg–Y–Nd alloy at different temperatures. Materials Characterization. 2011, 62: 535-539. (SCI)
[27] L. Zhang, G. Huang, H. Zhang and B. Song. Cold stamping formability of AZ31B magnesium alloy sheet undergoing repeated unidirectional bending process. Journal of Materials Processing Technology. 2011, 211(4):644-649. (SCI)
[28] G. Huang, H. Zhang, X. Gao, B. Song and L. Zhang. Forming limit of textured AZ31B magnesium alloy sheet at different temperatures. Transactions of Nonferrous Metals Society of China. 2011, 21(4): 836-843. (SCI)
[29] H. Zhang, G. Huang, D. Kong, G. Sang and B. Song. Influence of initial texture on formability of AZ31B magnesium alloy sheets at different temperatures. Journal of Materials Processing Technology. 2011, 211:1575-1580. (SCI)
[30] B. Song, G. Huang, H. Li, L. Zhang, G. Huang and F. Pan. Texture evolution and mechanical properties of AZ31B magnesium alloy sheets processed by repeated unidirectional bending. Journal of Alloys and Compounds. 2010, 489: 475-481.(SCI)
[31] R. Xin, B. Song, K. Zeng, G. Huang and Q. Liu. Effect of aging precipitation on mechanical anisotropy of an extruded Mg-Y-Nd alloy. Materials and Design. 2012, 34:384-388.(SCI)
[32] G. Huang, B. Song, W. Xu and L. Zhang. Structure and properties of AZ31B magnesium alloy sheets processed by RUB at different temperatures. Transactions of Nonferrous Metals Society of China. 2010, 10: 1815-1821.(SCI)
[33] G. Huang, H. Li, B. Song and L. Zhang. Tensile properties and microstructures of AZ31B magnesium alloy sheets undergoing repeated unidirectional bending. Transactions of Nonferrous Metals Society of China. 2010, 20: 28-33.(SCI)
[34] G. Huang, L. Zhang, B. Song and F. Pan. Cold Stamping for AZ31B Magnesium Alloy Sheet of Cell Phone House. Transactions of Nonferrous Metals Society of China. 2010, 20(s2), s608-s612. (SCI)
[35] G. Huang, W. Xu, G. Huang, H. Li and B. Song. Textural evolution of AZ31B magnesium alloy sheets undergoing repeated unidirectional bending at room temperature. Journal of Materials Science Technology. 2009, 25(3): 365-369.(SCI)
專利
[1] 一種提高純銅棒材拉伸強度的方法. 申請號: 201510278171.5.中國發明專利. 2015.
[2] 一種鎂合金棒材的加工方法. 申請號：201510029162.2. 中國發明專利. 2015.
[3] 一種改善鎂合金板帶材成形性能的方法. 授權號：ZL200910103073.2. 中國發明專利. 2010.
[4] 一種加工鎂合金帶材的單向多道次彎曲連續彎曲設備. 授權號：ZL200720188735.7. 實用新型專利. 2008.
