周野飛，男，1985年8月出生，博士，燕山大學機械工程學院副教授。
基本介紹
- 中文名：周野飛
- 出生日期：1985年8月
- 畢業院校：燕山大學
- 學位/學歷：博士
- 職業：教師
- 任職院校：燕山大學機械工程學院
論文成果,科研項目,
論文成果
[1] 周野飛.王少峰,邢曉磊,楊慶祥.納米孿晶強化貝氏體化塗層及其耐磨性.表面技術.2018
[2] 劉莎.王志傑,施志軍,周野飛,楊慶祥.Experiments and calculations on refining mechanism of NbC on primary M7C3 carbide in hypereutectic Fe-Cr-C alloy.JOURNAL OF ALLOYS AND COMPOUNDS.2017
[3] 劉莎.高玉魁,王志傑,施志軍,周野飛,Xuejun,Ren,楊慶祥.Refinement effect of TiC on ferrite by molecular statics/dynamics simulations and first-principles calculations.JOURNAL OF ALLOYS AND COMPOUNDS.2018
[4] 邢曉磊.袁曉明,周野飛,齊效文,陸鑫,邢天航,任學軍,楊慶祥.Effect of bainite layer by LSMCIT on wear resistance of medium-carbon bainite steel at different temperatures.SURFACE & COATINGS TECHNOLOGY.2017
[5] 劉莎.周野飛,邢曉磊,王吉波,楊慶祥.Refining effect of TiC on primary M7C3 in hypereutectic Fe-Cr-C harden-surface welding coating: Experimental research and first-principles calculation.JOURNAL OF ALLOYS AND COMPOUNDS.2017
[6] 趙雪兵.袁曉明,劉莎,趙長春,王彩霞,周野飛,楊慶祥.Investigation on WC/LaAlO3 heterogeneous nucleation interface by first-principles.JOURNAL OF ALLOYS AND COMPOUNDS.2017
[7] 邢曉磊.周野飛,齊效文,王吉波,陸鑫,楊育林,楊慶祥.Stress induced shear band strengthen high-silicon alloy steel via LHITT between M-s and M-d temperature.MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING.2017
[8] 高士友.黎宇航,周野飛,陸鑫,董齊,王賓,趙靜梅,肖雨晨.熔融沉積(FDM)3D列印成形件的力學性能實驗研究.塑性工程學報.2017
[9] 劉莎.周野飛,邢曉磊,王吉波,高玉魁,楊育林,楊慶祥.Low-Stress Abrasion Behaviors of Fe-Cr-C (1.4 similar to 5.6 wt-%) Hardsurface Coatings.WELDING JOURNAL.2016
[10] 邢曉磊.周野飛,卓玉國,王吉波,楊育林,楊慶祥.Effects of rare earth oxide Y2O3 on microstructure and mechanical properties of proeutectoid ferrite/granular bainitic coating.JOURNAL OF MATERIALS RESEARCH.2016
[11] 邢曉磊.周野飛,高士友,王吉波,楊育林,楊慶祥.Nano-twin in surface modified bainite induced by laser surface modification.MATERIALS LETTERS.2016
[12] 邢曉磊.周野飛,卓玉國,王吉波,楊育林,楊慶祥.Effects of rare earth oxide Y2O3on microstructure and mechanical properties of proeutectoid ferrite/granular bainitic coating.Journal of Materials Research.2016
[13] 王吉波.周野飛,邢曉磊,劉莎,趙長春,楊育林,楊慶祥.The effect of nitrogen alloying to the microstructure and mechanical properties of martensitic stainless steel hardfacing.SURFACE & COATINGS TECHNOLOGY.2016
[14] 劉莎.周野飛,邢曉磊,王吉波,楊育林,楊慶祥.Agglomeration model of (Fe,Cr)7C3carbide in hypereutectic Fe-Cr-C alloy.Materials Letters.2016
[15] 趙雪兵.卓玉國,劉莎,周野飛,趙長春,王彩霞,楊慶祥.Investigation on WC/TiC interface relationship in wear-resistant coating by first-principles.SURFACE & COATINGS TECHNOLOGY.2016
[16] 王吉波.Liu,周野飛,邢曉磊,劉莎,趙長春,楊育林,楊慶祥.Effect of nitrogen alloying on the microstructure and abrasive impact wear resistance of Fe-Cr-C-Ti-Nb hardfacing alloy.Elsevier B.V..2016
[17] 楊健.侯曉汝,張鵬,周野飛,楊育林,任學軍,楊慶祥.Mechanical properties of the hypereutectoid Fe-Cr-C hardfacing coatings with different nano-Y2O3additives and the mechanism analysis.Elsevier Ltd.2016
[18] 郭婧.劉利剛,劉莎,周野飛,齊效文,任學軍,楊慶祥.Stability of eutectic carbide in Fe-Cr-Mo-W-V-C alloy by first-principles calculation.MATERIALS & DESIGN.2016
[19] 劉莎.楊慶祥,周野飛,邢曉磊,王吉波,任學軍.Growth characteristics of primary M7C3 carbide in hypereutectic Fe-Cr-C alloy.SCIENTIFIC REPORTS.2016
[20] 楊建.候曉汝,張鵬,周野飛,楊育林,任學軍,楊慶祥.Mechanical properties of the hypereutectoid Fe-Cr-C hardfacing coatings with different nano-Y2O3 additives and the mechanism analysis.MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING.2016
[21] 劉莎.周野飛,邢曉磊,王吉波,楊育林,楊慶祥.Agglomeration model of (Fe,Cr)(7)C-3 carbide in hypereutectic Fe-Cr-C alloy.MATERIALS LETTERS.2016
[22] 郭婧.劉莎,周野飛,王吉波,邢曉磊,任學軍,楊慶祥.Stability of eutectic carbide in Fe-Cr-Mo-W-V-C alloy.MATERIALS LETTERS.2016
[23] 邢曉磊.周野飛,張鵬,王吉波,楊育林,楊慶祥.Y_2O_3對粒狀貝氏體堆焊金屬相變和力學性能的影響.表面技術.2016
[24] 段曉溪.高士友,董齊,周野飛,席明哲.Reinforcement mechanism and wear resistance of Al2O3/Fe-Cr-Mo steel composite coating produced by laser cladding.SURFACE & COATINGS TECHNOLOGY.2016
[25] 楊慶祥.趙斌,員霄,蹤雪梅,周野飛.納米Y2O3對過共晶Fe-Cr-C堆焊合金表面微觀組織與耐磨性的影響.表面技術.2015
[26] 鄭曉強.范兵利,周野飛,齊效文,楊慶祥.雙輥鑄軋304不鏽鋼應力場的數值模擬.河北冶金.2015
[27] 楊慶祥.趙斌,員霄,蹤雪梅,周野飛.納米Y_2O_3對過共晶Fe-Cr-C堆焊合金表面微觀組織與耐磨性的影響.表面技術.2015
[28] 楊慶祥.周野飛,楊育林,齊效文.Fe-Cr-C系耐磨堆焊合金研究進展.燕山大學學報.2014
[29] 陳繼剛.周野飛,姜永文,楊育林,楊慶祥.稀土矽鐵添加劑細化高鉻鑄鐵堆焊合金.材料熱處理學報.2014
科研項目
[1]電弧熔絲3D列印金屬構件結構調控技術研究, 2019/03/21, 進行
[2]航空自潤滑材料試驗評價, 2018/01/01, 進行
[3]壓力容器抗開裂、腐蝕磨損奧氏體不鏽鋼堆焊焊條的研究製備, 2018/11/05, 進行
[4]2018國家重點實驗室自主研究經費支持項目（科技廳配套）—自由探索29, 2018/09/06, 進行
[5]2018國家重點實驗室自主研究經費支持項目—自由探索29, 2018/09/06, 進行
[6]2017B100, 2017/10/01, 進行
[7]梯度納米貝氏體化塗層剪下帶增強增韌調控及其摩擦學行為研究, 2017/08/19, 進行
[8]2017國家重點實驗室自主研究經費支持項目（科技廳配套）-自由探索31, 2017/09/01, 進行
[9]2017國家重點實驗室自主研究經費支持項目-自由探索31, 2017/09/01, 進行
[10]鐵基合金電弧增材製造成形件強韌化研究, 2016/10/20, 進行
[11]2015B170, 2015/01/01, 進行
[12]2015年度國家重點實驗室基礎研究項目19, 2015/06/09, 進行
[13]Fe-Cr-C系耐磨塗層可控制備及其碳化物各向異性研究, 2015/03/27-2018/06/21, 完成
[14]高碳鐵基堆焊合金顯微組織與性能調控, 2014/06/13-2019/01/07, 完成
