基本介紹
- 中文名：呂盾
- 學位/學歷：博士
- 職業：教師
- 專業方向：工具機大數據及加工精度預測與控制
- 任職院校：西安交通大學
個人經歷,主講課程,研究方向,學術成果,榮譽獎項,
個人經歷
2013 - 今 西安交通大學講師，副教授。
2016-2017 德國斯圖加特大學訪問學者。
2007-2013 西安交通大學博士學習。
2001-2007 江蘇大學助教，講師。
2003-2006 江蘇大學碩士學習。
1997-2001 江蘇大學本科學習。
主講課程
本科生課程：
機械製造技術基礎（春季）。
產品設計與開發 （秋季）。
研究生課程：
工具機設計裝配與調試（秋季）。
研究方向
1、高速/高加速下動態精度智慧型控制算法。
2、複雜曲面零件加工智慧型五軸工具機。
3、工具機大數據及加工精度預測與控制。
學術成果
一、學術文章
2017年
[1]Dun Lu, Sanli Liu, Xuewei Li, Diaodiao Wu, Wanhua Zhao, Bingheng Lu.Optimal cutting directions by considering the dynamic mismatch between feed axes of machine tools.Int J Adv Manuf Technol.
[2]Dun Lu, Wanhua Zhao, Bingheng Lu.Tool Path Generation for Turbine Blades Machining with Twin-tool.Journal of Manufacturing Science and Engineering–Transactions of the ASME.
[3]Xiaojun Yang,Dun Lu, Chengfang Ma, Jun Zhang, Wanhua Zhao.Analysis on the multi-dimensional spectrum of the thrust force for the linear motor feed drive system in machine tools.Mechanical Systems and Signal Processing.
[4]Cunfan Zou, Huijie Zhang,Dun Lu, Jun Zhang and Wanhua Zhao.Effect of the screw-nut joint stiffness on the position-dependent dynamics of a vertical ball screw feed system without counterweight.Journal of mechanical engineering science.(SCI/EI)
2016年
[5]Dun Lu, Wanhua Zhao, Bingheng Lu.Thermal Characteristics of Water-lubricated Ceramic Hydrostatic hydrodynamic Hybrid Bearings.Tribology Letters.
[6]Tao Liang,Dun Lu, Xiaojun Yang, Jun Zhang, Xiaobo Ma, Wanhua Zhao. Feed fluctuation of ball screw feed systems and its effects on part surface quality.International Journal of Machine Tools and Manufacture.
[7]Hui Liu,Dun Lu, Jun Zhang, Wanhua Zhao.Receptance coupling of multi-subsystem connected via a wedge mechanism with application in the position-dependent dynamics of ballscrew drives.Journal of Sound and Vibration.
[8]Xiao Yang,Dun Lu, Jun Zhang, Wanhua Zhao.Analysis on steady-state vibration induced by backlash in machine tool rotary table.Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science.
[9]Jun Zha,Dun Lv, Qian Jia, Yaolong Chen. Motion straightness of hydrostatic guideways considering the ratio of pad center spacing to guide rail profile error wavelength.Int J Adv Manuf Technol.
[10]Xiaojun Yang, Yan Li, Chengfang Ma,Dun Lu, Jun Zhang, Wanhua Zhao. A Novel Evaluation Method on the Precision of Linear Motor Feed System in High-speed Machine Tools.Materials Science Forum.
[11]Xiaojun Yang, Chengfang Ma, Yan Li,Dun Lu, Jun Zhang, Wanhua Zhao.The Analysis and Optimization of Machining Precision Based on Electromechanical Matching in High-speed Machine Tools.Materials Science Forum.
[12]Chao Du, Jun Zhang,Dun Lu, Huijie Zhang, wanhua Zhao.A parametric modeling method for the pose-dependent dynamics of bi-rotary milling head.Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture.
[13]Chao Du,Dun Lu, Jun Zhang, wanhua Zhao.Pose-Dependent Dynamic Modeling and Analysis of Bi-Rotary Milling Head.ASME , International Manufacturing Science and Engineering Conference.
2015年
[14]Dun Lu, Wanhua Zhao, Bingheng Lu.The maximum dynamic eccentricity ratio of hydrodynamic rolling hybrid bearings.Proceedings of the Institution of Mechanical Engineers, Part J: J. Engineering Tribology.
[15]Xiaojun Yang,Dun Lu, Jun Zhang, Wanhua Zhao.Dynamic electromechanical coupling resulting from the air-gap fluctuation of the linear motor in machine tools.International Journal of Machine Tool & Manufacture.
[16]Xiaojun. Yang,Dun Lu, Jun Zhang, Wanhua Zhao.Investigation on the Displacement Fluctuation of the Linear Motor Feed System Considering the Linear Encoder Vibration.International Journal of Machine Tool & Manufacture.
[17]Junxun Ma,Dun Lu, Wanhua Zhao.Assembly errors analysis of linear axis of CNC machine tool considering component deformation.International Journal of Advanced Manufacturing Technology.
[18]Xiao Yang,Dun Lu, Sanli Liu, Jun Zhang, Wanhua Zhao.Modeling and analysis of steady-state vibration induced by backlash in servo rotary table. Front. Mech. Eng.
[19]馬成方，楊曉君，張俊，呂盾，趙萬華.面向運動平穩性的直線電機推力的頻譜特徵分析.西安交通大學學報.
[20]位文明、呂盾、張俊、趙萬華.變姿態下擺台多支承軸系軸承剛度的計算方法.華中科技大學學報(自然科學版).
2014年
[21]Dun Lu, Wanhua Zhao, Bingheng Lu.The Maximum Allowable Misalignment in Hydrodynamic Rolling Hybrid Bearings.Journal of Engineering for Gas Turbines and Power –Transactions of the ASME.
[22]Dun Lu, Wanhua Zhao, Bingheng Lu.Effects of Rolling Bearing Type and Size on the Maximum Eccentricity Ratio of Hydrodynamic Rolling Hybrid Bearings.Tribology Transactions.
[23]位文明、呂盾、張俊、趙萬華.三排圓柱滾子轉台軸承靜剛度的影響因素分析.西安交通大學學報.
[24]Wenming Wei, J Zhang,D Lu, W Zhao. Effect of tilting angle on the dynamics of tilting table driven by worm and worm wheel.Journal of Mechanical Engineering Science. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.
2013年
[25]Dun Lu, Wanhua Zhao, Bingheng Lu.Cage speed of hydrodynamic rollinghybridbearings.Tribology Letters.
2012年
[26]Dun Lu, Wanhua Zhao, Bingheng Lu.Staticcharacteristicsofanewhydrodynamic rollinghybridbearing.Tribology International.
[27]Dun Lu, Bingheng Lu, Jun Zhang.Effects of Parallel Misalignment on Performance of Hydrodynamic Rolling Hybrid Bearing.Proceedings of the ASME International Mechanical Engineering Congress & Exposition,
2011年
[28]Dun Lu, Wanhua Zhao, Bingheng Lu.A Zero Wear Assembly of a Hydrodynamic Bearing and a Rolling Bearing.Proceedings 2011 IEEE International Symposium on Assembly and Manufacturing(ISAM 2011),
申請授權發明專利
2016年
[1] 張俊，趙萬華，曹洪勇，呂盾，胡敏。一種重型工具機床身變形自動監測與報警裝置。中國。
2015年
[2]趙萬華，張俊，胡敏，馬軍旭，呂盾。一種微圓弧橫樑導軌面的設計方法。中國。
[3]趙萬華，張俊，胡敏，馬軍旭，呂盾。一種工具機地腳螺栓布局的最佳化方法。中國。
2011年
[4]盧秉恆，呂盾，趙萬華.一種滑動滾動複合軸承裝置：中國。
註冊軟體著作權
2016年
[1]趙萬華楊曉君馬成方張俊呂盾張會傑潘天航。直驅進給數據採集系統。
[2]趙萬華楊曉君馬成方張俊呂盾張會傑。直線電機進給系統推力特性分析軟體。
[3]趙萬華楊曉君馬成方張俊呂盾張會傑。直線電機進給系統運動精度分析軟體。
2015年
[4]趙萬華，張俊，李翔宇，位文明，呂盾。迴轉軸幾何精度與動態性能分析系統。
2014年
[5]趙萬華，張會傑，劉輝，杜超，馬軍旭，張俊，呂盾。高加速度下滾珠絲槓進給系統動特性分析軟。
[6]趙萬華，杜超，張會傑，呂盾，張俊，金濤。偏置式雙擺角銑頭動態特性分析及最佳化系統。
[7]趙萬華，杜超，呂盾，張俊，金濤。交叉滾子軸承動力學性能計算軟體。
[8] 趙萬華，杜超，位文明，謝振南，張俊，呂盾。擺叉式雙擺角銑頭動態特性分析及最佳化系統。
榮譽獎項
2014年，上銀優秀機械博士論文獎、佳作獎。
