男，1974年4月生，教授，博士，碩士生導師，2006年11月博士畢業於西安交通大學機械工程學院，2006.11-2013.5桂林電子科技大學機電工程學院副教授、教授，2008年任大連理工大學工業裝備結構分析國家重點實驗室客座研究人員。2010.2-2013.5分別在加拿大渥太華大學（博士後）日本名古屋大學（JSPS學者）、德國漢諾瓦大學（洪堡學者）進行相關研究。
基本介紹
- 中文名：向家偉
- 外文名：Jiawei Xiang
- 別名：無
- 國籍：中國
- 民族：漢
- 出生地：湖南辰溪
- 出生日期：1974
- 職業：教授
- 畢業院校：西安交通大學機械工程學院
- 信仰：共產主義
- 主要成就：機械結構損傷檢測
機電系統故障特徵提取技術
數值模擬小波新方法 - 代表作品：《小波有限元理論及其工程套用》
溫州大學機電工程學院教授
主持過20餘項縱向課題研究。在國內外學術刊物上發表研究論文100餘篇、SCI收錄60餘篇，引用700餘次。獲國家發明專利1項，申請國家發明專利7項。多種國際知名期刊審稿人，以第一完成人獲省部級科技成果獎2項。國家自然科學基金機械與製造學科同行評議專家(E0503)、廣西科技項目同行評議專家。
研究方向為：基於數值仿真的設計、監測、診斷；小波分析及現代信號處理方法；裂紋/損傷故障診斷、監測診斷軟體及儀器開發；有限元方法及分析。
部分論文如下：
2016年
[1] Jiawei Xiang*, Ming Liang, Yongteng Zhong. Computation of stress intensity factors using wavelet-based elements. Journal of Mechanics, 2016, 32(3): N1-N6.
[2] Yongteng Zhong, Jiawei Xiang*, Haifeng Gao, Yuqing Zhou. Impact energy level assessment of composite structures using MUSIC-ANN approach. Structural Control and Health Monitoring, 2016, 23(5): 825-837.
[3] Yongteng Zhong, Jiawei Xiang*. A two-dimensional plum-blossom sensor array-based multiple signal classification method for impact localization in composite structures. Computer-Aided Civil and Infrastructure Engineering, 2016, 31(8):633-643.
[4] Bingzhen Jiang, Jiawei Xiang*, Wang Yanxue. Rolling bearing fault diagnosis approach using probabilistic principal component analysis denoising and cyclic bispectrum. Journal of Vibration and Control, 2016, 22(10): 2420-2433.
[5] Yanxue Wang, Jiawei Xiang, Richard Markert, Ming Liang. Spectral kurtosis for fault detection, diagnosis and prognostics of rotating machines: A review with applications. Mechanical Systems and Signal Processing, 2016, 66-67:679-698.
[6] Yuqing Zhou, Jiawei Xiang, Yongteng Zhong, Jihong Pang. An improved FMEA method based on the linguistic weighted geometric operator and fuzzy priority. Quality Engineering, 2016, 28(4):491-498.
2015年
[1] Mao Liu, Pei Li, Yongteng Zhong, Jiawei Xiang*. Research on the band gap characteristics of two-dimensional phononic crystals micro-cavity with local resonant structure. Shock and Vibration, 2015, Volume 2015, Article ID 239832, 8 pages
[2] Jiawei Xiang*, Yaguo Lei, Yanxue Wang, Yumin He, Changjun Zheng, Haifeng Gao. Structural dynamical monitoring and fault diagnosis. Shock and Vibration, 2015, Volume 2015, Article ID 193831, 3 pages
[3] Mao Liu, Jiawei Xiang, Yongteng Zhong. The band gap and transmission characteristics investigation of local resonant quaternary phononic crystals with periodic coating. Applied Acoustics, 2015, 100: 10-17.
[4] Jiawei Xiang*, Yongteng Zhong, Haifeng Gao. Rolling element bearing fault detection using PPCA and spectral kurtosis. Measurement, 2015, 75: 180-191.
[5] Meng Lingjie, Xiang Jiawei,Wang Yanxue, Yongying Jiang, Haifeng Gao. A hybrid fault diagnosis method using morphological filter-translation invariant wavelet and improved ensemble empirical mode decomposition . Mechanical Systems and Signal Processing, 2015, 50–51:101–115.
[6] Meng Lingjie, Xiang Jiawei,Yongteng Zhong, Wang Yanxue, Wenlei Song. Fault diagnosis of rolling bearing based on second generation wavelet denoising and morphological filter . Journal of Mechanical Science and Technology, 2015, 29(8): 3121-3129
[7] Yanxue Wang, Jiawei Xiang, Qiuyun Mo, Shuilong He. Compressed sparse time–frequency feature representation via compressive sensing and its applications in fault diagnosis . Measurement, 2015, 68: 70-81.
[8] Yanxue Wang, Richard Markert, Jiawei Xiang, Weiguang Zheng. Research on variational mode decomposition and its application in detecting rub-impact fault of the rotor system . Mechanical Systems and Signal Processing, 2015, 60–61:243-251.
[9] Haifeng Gao, Jiawei Xiang, Changjun Zheng, Yongying Jiang, Toshiro Matsumoto. BEM-based analysis of elastic banded material by using a contour integral method. Engineering Analysis with Boundary Elements, 2015, 53: 56-64.
2014年
[1] Shaohua Zhang, Pei Li, Yongteng Zhong, Jiawei Xiang*. Structural topology optimization based on the level set method using COMSOL . CMES-Computer Modeling in Engineering & Sciences, 2014, 101(1): 17-31.
[2] Jiawei Xiang*, Ming Liang, Yuming He. Experimental investigation of frequency-based multi-damage detection for beams using support vector regression. Engineering Fracture Mechanics 2014, 131: 257-268.
[3] Jiawei Xiang*, Udo Nackenhorst, Yanxue Wang, Yongying Jiang, Haifeng Gao. A new method to detect cracks in plate-like structures with though-thickness cracks .Smart Structures and Systems, 2014, 14(3): 397-418.
[4] Pengfei Li, Yongying Jiang, Jiawei Xiang*. Experimental investigation for fault diagnosis based on a hybrid approach using wavelet packet and support vector classification . The Scientific World Journal-Mechanical Engineering, 2014, Vol. 2014, Article ID 145807, 10 pages, doi:10.1155/2014/145807
[5] Mao Liu, Jiawei Xiang*, Yongying Jiang, Haifeng Gao, Yuqing Zhou, Fengping Li. Research on band structure of one-dimensional phononic crystals based on wavelet finite element method . CMES-Computer Modeling in Engineering & Sciences, 2014, 97(5):425-436.
[6] Yanfeng Wang, Ming Liang, Jiawei Xiang. Damage detection method for wind turbine blades based on dynamics analysis and mode shape difference curvature information. Mechanical Systems and Signal Processing, 2014, 48(1-2): 351-367.
[7] Yanxue Wang, Jiawei Xiang, Jiang Zhansi, Yang Lianfa, Zhengjia He. Vibration signals denoising using minimum description length principle for detecting impulsive signatures . Proceedings of the Institution of Mechanical Engineers, Part C, Journal of Mechanical Engineering Science, 2014, 228(10): 1818-1828.
